Grover N, Nandlal B. An in vitro evaluation of the effect of
sandblasting and laser surface treatment on the shear bond strength of a
composite resin to the facial surface of primary anterior stainless steel
crowns. J Clin Exp Dent. 2015;7(1):e119-25.
doi:10.4317/jced.51876
http://dx.doi.org/doi:10.4317/jced.51876
------------------------------------------------------------------------------------------------------------------------------
References
|
1. Wiedenfeld KR, Draughn RA, Welford JB. An esthetic technique for
veneering anterior stainless steel crowns with composite resin. ASDC J Dent
Child. 1994;61:321-6. |
|
|
2. Roberts C, Lee JY, Wright TJ. Clinical evaluation
of and parental satisfaction with resin faced stainless steel crowns. Pediatr Dent.
2001;23:28-31. |
|
|
3. AI Shalan TA, Till MG, Feigal RJ. Composite rebonding
to stainless steel metal using different bonding agent. Pediatr Dent.
1997;19:27-6. |
|
|
4. Waggoner WF. Anterior crowns for primary anterior
teeth: an evidence based assessment of the literature. Eur
Arch Paediatr Dent. 2006;7:53-7. |
|
|
5. Salama FS, MallakI BF. An in vitro comparison of four surface
preparation techniques for veneering a compomer to
stainless steel. Pediatr
Dent. 1997;19:267-73. |
|
|
6. Deepak K, Ahila SC, Muthukumar B, Vasanthkumar M.
Comparative evaluation of effect of laser on shear bond strength of ceramic
bonded with two base metal alloys: an in-vitro study. Indian J Dent
Res. 2013;24:610-5. |
|
|
7. Murray AK, Attrill DC, Dickinson MR. The effects of XeCl
laser etching of Ni-Cr alloy on bond strengths to composite resin: a comparison
with sandblasting procedures. Dent Mater. 2005;21:538-44. |
|
|
8. Madani, A., Astaneh, P., Shahabi, S., Nakhaei, M., Bagheri G., H.,
& Chiniforush, N. Influence of different power
outputs of intraoral Nd: YAG laser on shear bond
strength of resin cement to nickel-chromium dental alloy. Lasers in Medical
Science. 2013;28:229-34. |
|
|
|
|
|
9. Oskoee PA, Kachoei M, Rikhtegaran S, Fathalizadeh F, Navimipour EJ.
Effect of surface treatment with sandblasting and Er,Cr:YSGG laser on bonding of stainless steel
orthodontic brackets to silver amalgam. Med Oral Patol Oral Cir Bucal. 2012;17:292-6. |
|
|
10. Kim J,
Cho S. The effects of laser etching on shear bond strength at the titanium
ceramic interface. J of Prosthet Dent. 2009;101:101-6. PMID:19167534 |
|
|
|
|
|
11. Akin H, Tugut F, Topcuoglu S, Kirmali O. Effects
of sandblasting and laser irradiation on shear bond strength of low-fusing
porcelain to titanium. J Adhes Dent. 2013;15:55-63. |
|
|
12. Operator's manual Laser cheval (Nd: YAG Laser CF 11-75 (60). |
|
|
13. Waggoner WF, Cohen H. Failure strength of four
veneered primary stainless steel crowns. Pediatr Dent.
1995;17:36-40. |
|
|
14. Chawla HS, Gauba K, Goyal A. Trend of
dental caries in children of Chandigarh over the last sixteen years. J Indian
Soc Pedod Prev Dent. 2000;18:41-5. |
|
|
15. Tjan HL, Nemetz H. Bond
strength of composite to metal mediated by metal adhesive promoters. J Prosthet.
Dent. 1987;5:35-4. PMID:3298624 |
|
|
|
|
|
16. Aboush YEY, Mudassir A, Elderton RJ. Technical note: Resin to metal bonds
mediated by Adhesion promoters. Dent Mater. 1991;7:279-80. PMID:1814774 |
|
|
|
|
|
17. McCaughey AD. Sandblasting and
tinplating–surface treatment to improve bonding with resin cements. Dental Update.
1993;20:153-7. |
|
|
18. Storer C, Devanathan D. In
vitro testing of a molar band surface with enhanced bond strength. TP Orthodontics.
1998. |
|
|
|
|
|
19. Van Meerbeek B et al. Relationship
between bond-strength tests and clinical outcomes. Dent Mater. 2010;26:100-121. |
|
|
20. Braga RR, Meira JB, Boaro LC, Xavier TA. Adhesion
to tooth structure: A critical review of "macro" test methods. Dent Mater. 2010;26:38‑49. |
|