López-Suárez C, Gonzalo E, Peláez J, Rodríguez V, Suárez MJ. Fracture resistance and failure mode of posterior fixed dental prostheses fabricated with two zirconia CAD/CAM systems. J Clin Exp Dent. 2015;7(2):e250-3.

 

doi:10.4317/jced.52067

http://dx.doi.org/doi:10.4317/jced.52067

 

References

1. Borba M, de Araujo MD, de Lima E, Yoshimura HN, Cesar PF, Grigss JA, et al. Flexural strength and failure modes of layered ceramic structures. Dent Mater. 2011;27:1259-66.
http://dx.doi.org/10.1016/j.dental.2011.09.008
PMid:21982199 PMCid:PMC3205330

 

2. Manicone PF, Rossi Iommetti P, Raffaelli L. An overview of zirconia ceramics: basic properties and clinical applications. J Dent. 2007;35:819-26.
http://dx.doi.org/10.1016/j.jdent.2007.07.008
PMid:17825465

 

3. Pelaez J, G Cogolludo P, Serrano B, L Lozano JF, Suarez MJ. A four-year prospective clinical evaluation of zirconia and metal-ceramic posterior fixed dental prostheses. Int J Prosthodont. 2012;25:451-8
PMid:22930766

 

4. Sundh A, Sjogren G. A comparison of fracture strength of yttrium oxide partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil. 2004;31:682-8.
http://dx.doi.org/10.1111/j.1365-2842.2004.01284.x
PMid:15210030

 

5. Aboushelib MN, de Jager N, Kleverlaan CJ, Feilzer AJ. Effect of loading method on the fracture mechanics of two layered all-ceramic restorative systems. Dent Mater. 2007;23:952-9.
http://dx.doi.org/10.1016/j.dental.2006.06.036
PMid:16979230

 

6. Komine F, Blatz MB, Matsumura H. Current status of zirconia-based fixed restorations. J Oral Sci. 2010;52:531-9.
http://dx.doi.org/10.2334/josnusd.52.531
PMid:21206154

 

7. Guazzato M, Proos K, Sara G, Swain MV. Strength, reliability, and mode of fracture of bilayered porcelain/core ceramics. Int J Prosthodont. 2004;17:142-9.
PMid:15119863

 

8. Fischer J, Grohmann P, Stawarczyk B. Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites. Dent Mat J, 2008;27:448-54.
http://dx.doi.org/10.4012/dmj.27.448

PMid:18717175

 

9. Ashkanani HM, Raigrodski AJ, Flinn BD, Heindl H, Mancl LA. Flexural and shear strengths of ZrO2 and a high-noble alloy bonded to their corresponding porcelains. J Prosthet Dent. 2008;100:274-84.
http://dx.doi.org/10.1016/S0022-3913(08)60206-1

PMid:18922256

 

10. Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Effect of zirconia type on its bond strength wit different veneer ceramics. J Prosthodont. 2008;17:401-8.
http://dx.doi.org/10.1111/j.1532-849X.2008.00306.x
PMid:18355163

 

11. Agustin-Panadero R, Fons-Font A, Roman-Rodriguez JL, Granell-Ruiz M, del Rio-HGighsmith J, Sola-Ruiz MF. Zirconia versus metal: a preliminary comparative analysis of ceramic veneer behavior. Int J Prosthodont. 2012;25:294-300.

PMid:22545261

 

12. Raigrodski AJ, Hillstead MB, Meng GK, Chung KH. Survival and complications of zirconia-based fixed dental prostheses: A systematic Review. J Prosthet Dent. 2012;107:170-7.
http://dx.doi.org/10.1016/S0022-3913(12)60051-1

PMid:22385693

 

13. Vigolo P, Mutinelli S. Evaluation of zirconium-oxide-based ceramic single-unit posterior fixed dental prostheses (FDPs) generated with two CAD/CAM systems compared to porcelain-fused-to-metal single-unit posterior FDPs: a 5-year clinical prospective study. J Prosthodont. 2012;21:265-9.
http://dx.doi.org/10.1111/j.1532-849X.2011.00825.x
PMid:22339945

 

14. Rinke S, Gersdorff N, Lange K, Roediger M. Prospective evaluation of zirconia posterior fixed partial dentures: 7-year clinical results. Int J Prosthodont. 2013;26:164-71.
http://dx.doi.org/10.11607/ijp.3229
PMid:23476912

 

15. Agustin-Panadero R, Román-Rodríguez JL, Ferreiroa A, Solá-Ruíz MF, Fons-Font A. Zirconia in fixed prosthesis. A literature review. J Clin Exp Dent. 2014;6:e66-73
http://dx.doi.org/10.4317/jced.51304
PMid:24596638 PMCid:PMC3935908

 

16. Zhang D, Lu C, Zhang X, Mao S, Arola D. Contact fracture of full ceramic crowns subjected to occlusal loads. J Biomech. 2008;4:2995- 3001.
http://dx.doi.org/10.1016/j.jbiomech.2008.07.019
PMid:18783775

 

17. Tsalouchou E, Cattell M, Knowles J, Pittayachawan P, McDonald A. Fatigue and fracture properties of yttria partially stabilized zirconia crown systems. Dent Mater. 2008;24:308-18.
http://dx.doi.org/10.1016/j.dental.2007.05.011
PMid:17681371

 

18. Saito A, Komine F, Blatz M, Matsumura H. A comparison of bond strength of layered veneering porcelains to zirconia and metal. J Prosthet Dent. 2010;104:247-57.
http://dx.doi.org/10.1016/S0022-3913(10)60133-3

PMid:20875529

 

19. Rosentritt M, Hmaidouch R, Behr M, Handel G, Schneider-Feyrer S. Fracture resistance of zirconia FPDs with adhesive bonding versus conventional cementation. Int J Prosthodont. 2011;24:168-71.
PMid:21479286

 

20. Farga-Ni-oles I, Agustin-Panadero R, Román-Rodríguez JL, Solá-Ruíz MF, Granell-Ruíz M, Fons-Font A. Fractographic study of the behabiour of different ceramic veneers on full coverage crowns in relation to supporting core materials. J Clin Exp Dent. 2013;5:e260-6.
http://dx.doi.org/10.4317/jced.51293
PMid:24455092 PMCid:PMC3892263

 

21. Blatz MB, Bergler M,Ozer F, Holst S, Phark JH, Chiche GJ. Bond strength of different veneering ceramics to zirconia and their susceptibility to thermocycling. Am J Dent. 2010;23:213-6.
PMid:21250572

 

22. Sundh A, Molin M, Sjögren G. Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater. 2005;21:476-82.
http://dx.doi.org/10.1016/j.dental.2004.07.013
PMid:15826705

 

23. Molin MK, Karlsson SL. Five-year clinical prospective evaluation of zirconia-based Denzir 3-unit FPDs. Int J Prosthodont. 2008;21:223-7.
PMid:18548960

 

24. Kokubo Y, Tsumita M, Kano T, Fukushima S. The influence of zirconia coping designs on the fracture load of all-ceramic molar crowns. Dent Mater J. 2011;30:281-5.
http://dx.doi.org/10.4012/dmj.2010-130
PMid:21597222

 

25. Kou W, Kou S, Liu H, Sjögren G. Numerical modeling of the fracture process in a three-unit all-ceramic fixed partial denture. Dent Mater. 2007;23:1042-9.
http://dx.doi.org/10.1016/j.dental.2006.06.039
PMid:17109952

 

26. Larsson C, Holm L, Lovgren N, Kokubo Y, Vult von Steyern P. Fracture strength of four-unit Y-TZP FPD cores designed with varying connector diameter. An in-vitro study. J Oral Rehabil. 2007;34:702-9.
http://dx.doi.org/10.1111/j.1365-2842.2007.01770.x
PMid:17716270

 

27. Silva NR, Bonfante EA, Rafferty BT, Zavanelli RA, Rekow ED, Thompson VP, et al. Modified Y-TZP core design improves all-ceramic crown reliability. J Dent Res. 2011;90:104-8.
http://dx.doi.org/10.1177/0022034510384617
PMid:21057036 PMCid:PMC3144096