Alió-Sanz JJ, Claros-Stucchi M, Albaladejo A,
Iglesias-Conde C, Alvarado-Lorenzo A. In vitro
comparative study on the friction of stainless steel wires with and without Orthospeed®
(JAL 90458) on an inclined plane. J Clin
Exp Dent. 2016;8(2):e141-5.
doi:10.4317/jced.52715
References
|
1. Taylor NG, Ison K. Frictional resistance between orthodontic
brackets and archwires in the bucal
segments. Angle Orthod. 1995;66:215-22. PMid:8805917 |
|
|
|
|
|
2. Kapur
Wadhwa R, Kwon HK, Sciote
JJ, Close JM. Friction resistance in ceramic and metal brackets. J Clin Orthod. 2004;38:35-8. |
|
|
|
|
|
3. Kojima
Y, Fukui
H. Numeric simulations of en-masse space closure with
sliding mechanics. Am J Orthod Dentofacial
Orthop. 2010;138:702.e1-6. PMid:21130318 |
|
|
|
|
|
4. Staggers JA, Germane N.
Clinical considerations in the use of retraction mechanics. J Clin Orthod. 1991;25:364-9. |
|
|
|
|
|
5. Tselepsis
M, Brockhurst P, West VC. The dynamic frictional
resistance between orthodontic brackets and archwires.
Am J Orthod Dentofacial Orthop. 1994;106:131-8. PMid:8059748 |
|
|
|
|
|
6. Rossouwn
PE. Friction: An Overview. Semin Orthod. 2003;9:218-22. |
|
|
|
|
|
7. Matarese
G, Nucera R, Militi
A. Evaluation of frictional forces during dental alignment: An experimental
model with 3 non leveled brackets. Am J Orthod Dentofacial Orthop. 2008;133:708-15. |
|
|
|
|
|
8. Krim
J. Surface science and the atomic-scale origins of friction: what once was
old is new again. Surf
Sci. 2002;500:741-58. |
|
|
|
|
|
9. Rossouwn
E. A fundamental review of variables associated with low velocity frictional
dynamics. Semin Orthod.
2003;9:223-35. |
|
|
|
|
|
10. Braunchi
L, Senn C. Active and passive self-ligation - a
myth? Angle Orthod.
2011;81:312-8. |
|
|
|
|
|
11. Kusy
RP, Whitley JQ. Friction between different wire-bracket configurations and
materials. Semin Orthod.
1997;3:166-77. PMID:9573878 |
|
|
|
|
|
12. Whitley J, Kusy RP. Influence of interbracket
distances on the resistance to sliding of orthodontic appliances. Am J Orthod Dentofacial Orthop. 2007;132:360-2. |
|
|
|
|
|
13. Bo-Sun K, Seung-Hak B. Three-dimensional relationship between the
critical contact angle and the torque angle. Am J Orthod
Dentofacial Orthop. 2003;123:64-73. |
|
|
|
|
|
14. Kusy
RP, Withley JQ. Influence of archwire
and brackets dimensions on sliding mechanics: derivation and determinations
of the critical contact angles for binding. Eur J Orthod. 1999;21:199-208. |
|
|
|
|
|
15. Burrow JS. Friction
and resistance to sliding in orthodontics: A critical review
. Am J Orthod Dentofacial
Orthop. 2009;135:422-47. |
|
|
|
|
|
16. Hussmann P, Bourauel C, Wessinger M, Jäger A. The frictional behavior of coated guiding archwires. J Orofac Orthop. 2002;63:199-211. PMid:12132308 |
|
|
|
|
|
17. Ireland A, Sherriff M,
Mc Donald F. Effect of bracket and wire composition on frictional forces. Eur J Orthod. 1991;13:322-8. |
|
|
|
|
|
18. Moore M, Harrington E,
Rock WP. Factors affecting friction in the pre-adjusted appliance. Eur J Orthod. 2004;26:579-83. |
|
|
|
|
|
19. Yeh
CL, Kusnoto B, Viana G,
Evans CA, Drummond JL. In vitro evaluations of fricctional
resistance between brackets with passive-ligation designs. Am J Orthod Dentofacial Orthop. 2007;131:704.e11-22. |
|
|
|
|
|
20. Alió
JJ. Reliability analysis and validation scientific leveling phase JAL 90458 as product reduces friction treatment multibrackets fixtures. 1a ed. Madrid: Ripano S.A.; 2009. pp. 195-201. |
|
|
|
|
|
21. Kusy
RP, Whitley JQ, Prewitt MJ. Comparison of the frictional coefficients for
selected archwire-bracket slot combinations in the
dry and wet states. Angle Orthod. 1991;61:293-302. |
|
|
|
|
|
22. Kusy
RP, Whitley J, de Araújo Gurgel
J. Comparisons of surface roughnesses and sliding
resistances of 6 titanium-based or TMA-type archwires.
Am J Orthod Dentofacial Orthop. 2004;126:589-603. |
|
|
|
|
|
23. Thorstenson
GA, Kusy RP. Resistance to sliding of self-ligating brackets versus conventional stainless steel
twin brackets with second-order angulations in the dry and wet states. Am J Orthod Dentofacial Orthop. 2001;120:361-70. |
|
|
|
|
|
24. Kula K, Phillips C, Gibilaro A, Proffit WR. Effect
of implantation of TMA archwires on the rate of
orthodontic sliding space closure. Am J Orthod Dentofacial Orthop. 1998;114:577-80. PMid:9810054 |
|
|
|
|
|
25. Ryan R, Walker G,
Freeman K, Cisneros GJ. The effects of ion implantation on rate of tooth
movement: An in vitro model. Am J Orthod Dentofacial Orthop. 1997;112:64-8. PMID:9228843 |
|
|
|
|
|
26. Zufall
SW, Kusy RP. Sliding mechanics of coated composites
wires and the development of an engineering model for binding. Angle Orthod. 2000;70:34-47. |
|
|
|
|
|
27. Redlich
M, Mayer Y, Harari D, Lewinstein
I. In Vitro study of frictional forces during sliding mechanics of
"reduced- friction" brackets. Am J Orthod
Dentofacial Orthop. 2003;124:69-73. PMID:12867900 |
|
|
|
|
|
28. Fortini
A, Lupoli M, Cacciafesta
V. A new low friction ligation system. J Clin Orthod. 2005;39:434-70. PMid:16247196 |
|
|
|
|
|
29. Hamdan
A, Rock P. The effect of different combinations of tip and torque on archwire/bracket friction. Eur J
Orthod. 2008;30:508-14. |
|
|
|
|
|
30.
Ogata RH, Nanda RS, Duncanson MG Jr, Sinha PK, Currier GF. Frictional resistances in stainless steel bracket-wire
combinations with effects of vertical deflections. Am J Orthod
Dentofacial Orthop. 1996;109:535-42. PMid:8638599 |
|
|
|
|
|
31.
Kapila S, Angolkar PV, Duncanson MG Jr, Nanda RS. Evaluation of
friction between edgewise stainless steel brackets and orthodontic wires of
four alloys. Am J Orthod Dentofacial
Orthop. 1990;98:117-26. PMid:2378317 |
|