Roperto R, Assaf H, Soares-Porto T, Lang L, Teich S. Are different generations of CAD/CAM milling
machines capable to produce restorations with similar quality? J Clin Exp Dent. 2016;8(4):e423-8.
doi:10.4317/jced.52984
References
|
1. Reich S, Schierz O. Chair-side generated posterior lithium disilicate crowns after 4 years. Clin
Oral Investig. 2013;17:1765-72. |
|
|
|
|
|
2. Mörmann
W, Wolf D, Ender A, Bindl A, Göhring
T, Attin T. Effect of Two Self-Adhesive Cements on
Marginal Adaptation and Strength of Esthetic Ceramic CAD/CAM Molar Crowns. J Prosthodont. 2009;18:403-10. |
|
|
|
|
|
3. Estafan
D, Dussetschleger F, Agosta
C, Reich S. Scanning electron microscope evaluation of CEREC II and CEREC III
inlays. Gen Dent. 2003;51:450-4. |
|
|
|
|
|
4. Bindl
A, Mörmann WH. Clinical and SEM evaluation of
all-ceramic chair-side CAD/CAM-generated partial crowns. Eur
J Oral Sci. 2003;111:163-9. |
|
|
|
|
|
5. Yao J, Li J, Wang Y,
Huang H. Comparison of the flexural strength and marginal accuracy of
traditional and CAD/CAM interim materials before and after thermal cycling. J
Prosthet Dent. 2014;112:649-57. |
|
|
|
|
|
6. Giannetopoulos
S, van Noort R, Tsitrou
E. Evaluation of the marginal integrity of ceramic copings with different
marginal angles using two different CAD/CAM systems. J Dent. 2010;38:980-6. |
|
|
|
|
|
7.
Souza RO, Özcan M, Pavanelli
CA, Buso L, Lombardo GH, Michida
SM, et al. Marginal and internal discrepancies related to
margin design of ceramic crowns fabricated by a CAD/CAM system. J Prosthodont. 2012;21:94-100. |
|
|
|
|
|
8. Tsitrou
EA, Northeast SE, van Noort R. Evaluation of the
marginal fit of three margin designs of resin composite crowns using CAD/CAM.
J Dent. 2007;35:68-73. |
|
|
|
|
|
9. Akbar JH, Petrie CS,
Walker MP, Williams K, Eick JD. Marginal adaptation
of Cerec 3 CAD/CAM composite crowns using two
different finish line preparation designs. J Prosthodont.
2006;15:155-63. |
|
|
|
|
|
10. Mou
SH, Chai T, Wang JS, Shiau
YY. Influence of different convergence angles and tooth preparation heights
on the internal adaptation of Cerec crowns. J Prosthet Dent. 2002;87:248-55. |
|
|
|
|
|
11. Kim JH, Cho BH, Lee
CH, Know SJ, Yi YA, Shin Y, et al. Influence of preparation design on fit and
ceramic thickness of CEREC 3 partial ceramic crowns after cementation. Acta Odont Scandinavia. 2015;73:107-13. |
|
|
|
|
|
12. Kassem
AS, Atta O, El-Mowafy O. Fatigue resistance and microleakage of CAD/CAM ceramic and composite molar crowns.
J Prosthodont. 2012;21:28-32. |
|
|
|
|
|
13. Sturdevant
JR, Bayne SC, Heymann HO. Margin gap size of
ceramic inlays using second generation CAD/CAM equipment. J Esthet Dent. 1999;11:206-14. |
|
|
|
|
|
14. Krejci
I, Lutz F, Reimer M. Marginal adaptation and fit of adhesive ceramic inlays.
J Dent. 1993;21:39-46. PMid:8425982 |
|
|
|
|
|
15. Shim JS, Lee JS, Lee
JY, Choi YJ, Shin SW, Ryu
JJ. Effect of software version and parameter settings on the marginal and
internal adaptation of crowns fabricated with the CAD/CAM system. J Appl Oral Sci. 2015; 23:515-22. |
|
|
|
|
|
16. Bosh G, Ender A, Mehl A. A 3-Dimensional accuracy analysis of chairside CAD/CAM milling processes. J Prosthet Dent. 2014;112:1425-31. |
|
|
|
|
|
17. Hamza
TA, Ezzat, HA, EL-Hossary
MMK, Katamish HAEM, Shokry
TE, Rosentiel SF. Accuracy of ceramic restorations
made with two CAD/CAM systems. J Prosthe Dent. 2013;109:83-7. PMid:23395333 |
|
|
|
|
|
18. Cho HD, Jun YT, Yang
MY. Five axis CNC milling for effective machining of sculptured surfaces. Int J Prod Res. 1993;31:2559-73. |
|
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||