Moharam LM, El-Hoshy
AZ, Abou-Elenein K. The effect of
different insertion techniques on the depth of cure and vickers surface micro-hardness of two bulk-fill resin
composite materials. J Clin Exp Dent. 2017;9(2):e266-71.
doi:10.4317/jced.53356
References
|
1. Peutzfeldt
A, Asmussen E. Determinants of in vitro gap
formation of resin composites. J Dent. 2004; 32:109-15. |
|
|
|
|
|
2. Nagpal
R, Manuja N, Tyagi S,
Singh U. In vitro bonding effectiveness of self-etch adhesives with different
application techniques: a microleakage and scanning
electron microscopic study. J Conserv Dent. 2011;
14:258-63. |
|
|
|
|
|
3. Tarle
TA, Marovic D, Andermatt
L, Ristic M, Tauböck T.
Influence of irradiation time on subsurface degree of conversion and microhardness of high-viscosity bulk-fill resin
composites. Clin Oral Investig.
2015;19:831-40. |
|
|
|
|
|
4. Finan
L, Palin WM, Moskwa N, McGinley EL, Fleming GJ. The
influence of irradiation potential on the degree of conversion and mechanical
properties of two bulk-fill flowable resin composite
base materials. Dent Mater. 2013; 29:906-12. |
|
|
|
|
|
5. Yan YL, Kim YK, Kim KH,
Kwon TY. Changes in degree of conversion and microhardness
of dental resin cements. Oper Dent. 2010;35:203-10. |
|
|
|
|
|
6. Fleming G, Awan M, Cooper P, Sloan A. The potential of a
resin-composite to be cured to a 4 mm depth. Dent Mat. 2008;24:522-9. |
|
|
|
|
|
7. Nagi
SM, Moharam LM, Zaazou
MH. Effect of resin thickness, and curing time on the micro-hardness of
bulk-fill resin composites. J Clin Exp Dent. 2015;7:e600-4. PMid: 26644836 PMCid:4663062 |
|
|
|
|
|
8. Bhalla
M, Patel D, Shashikiran ND, Mallikarjuna
RM, Nalawade TM, Reddy HK. Effect of light-
emitting diode and halogen light curing on the micro-hardness of dental
composite and resin-modified glass ionomer cement:
An in vitro study. J Ind Soc Ped
Prev Dent. 2012;30:201-5. |
|
|
|
|
|
9. Poggio
C, Lombardini M, Gaviati
S, Chiesa M. Evaluation of Vickers hardness and
depth of cure of six composite resins photo-activated with different
polymerization modes. J Conserv Dent. 2012;15:237-41. |
|
|
|
|
|
10. Leprince
JG, Palin WM, Vanacker J, Sabbsgh
J, Devaux J,Leloup G. Physico-mechanical characteristics of commercially
available bulk-fill composites. J Dent. 2014;42:e993-e1000. |
|
|
|
|
|
11. Hahnel
S, Dowling AH, El-Safty S, Fleming GJP. The
influence of monomeric resin and filler
characteristics on the performance of experimental resin-based composites
(RBCs) derived from a commercial formulation. Dent Mater. 2012;28:e416-23. |
|
|
|
|
|
12. Van Ende A, De Munck J, Van Landuyt KL, Poitevin A, Peumans M, Van Meerbeek B.
Bulk-filling of high C-factor posterior cavities: Effect on adhesion to
cavity-bottom dentin. Dent Mater. 2013;29:269-77. |
|
|
|
|
|
13. Abouelleil
H, Pradelle N, Villat C, Attik N, Colon P, Grosgogeat B.
Comparison of mechanical properties of a new fiber reinforced composite and
bulk filling composites. Restor Dent Endod. 2015;40:262-70. |
|
|
|
|
|
14. Shortall
AC, Palin WM, Burtscher P. Refractive index
mismatch and monomer reactivity influence on composite curing depth. J Dent
Res. 2008;87:e84-8. PMid:18096900 |
|
|
|
|
|
15. Ilie
N, Hickel R. Investigations on a methacrylate-based flowable
composite based on the SDRTM technology. Dent Mater. 2011;27:348-55. |
|
|
|
|
|
16. Ilie
N, Bucuta S, Draenert M.
Bulk-fill resin-based composites: an in vitro assessment of their mechanical
performance. Oper Dent. 2013;8:618-25. |
|
|
|
|
|
17. Swapna
MU, Koshy S, Kumar A, Nanjappa
N, Benjamin S, Nainan MT. Comparing marginal microleakage of three Bulk Fill composites in Class II
cavities using confocal microscope: An in vitro
study. J Conserv Dent. 2015;18:409-13. |
|
|
|
|
|
18. Johnston WM, Leung RL,
Fan PL. A mathematical model for post-irradiation hardening of photoactivated composite resins. Dent Mater. 1985;1:e191-4. PMid:2936641 |
|
|
|
|
|
19. International standard
ISO 4049-2009. Dentistry, Polymer-based restorative materials. Geneva: ISO.
www.iso.org. [accessed 15.10.14] |
|
|
|
|
|
20. Miyagawa
Y, Powers JM, O'Brien WJ. Optical properties of direct restorative materials.
J Dent Res. 1981;60:890-4. |
|
|
|
|
|
21. Lee YK. Influence of
filler on the difference between the transmitted and reflected colors of
experimental resin composites. Dent Mater. 2008;24:1243-7. |
|
|
|
|
|
22. Campbell PM, Johnston
WM, O'Brien WJ. Light scattering and gloss of an experimental quartz-filled
composite. J Dent Res. 1986;65:892-4. |
|
|
|
|
|
23.
Da Silva EM, Poskus LT, Guimaraes
JGA. Influence of light polymerization modes on the
degree of conversion and mechanical properties of resin composites: a
comparative analysis between a hybrid and a nanofilled
composite. Oper Dent. 2008;33:287-93. |
|
|
|
|
|
24. Dickens S, Stansbury J, Choi K, Floyd C. Photopolymerization kinetics of methacrylate
dental resins. Macromolecules. 2003;36:e6043-53. |
|
|
|
|
|
25.
Khatri CA, Stansbury JW, Schultheisz CR, Antonucci JM. Synthesis, characterization and evaluation of
urethane derivatives of Bis-GMA. Dent Mater. 2003;19:e584-8. PMid:12901981 |
|
|
|
|
|
26. Mills RW, Uhl A, Backwell GB, Jandt KD. High power light emitting diode (LED) arrays
versus halogen light polymerization of oral biomaterials: Barcol
hardness, compressive strength and radiometric properties. Biomaterials. 2002;23:e2955-63. PMid:12069337 |
|
|
27. Yap AU, Seneviratne C. Influence of light energy density on
effectiveness of composite cure. Oper Dent. 2001;26:e460-6. PMid: 11551010 |
|