Pereira JR, Jśnior LC, Só MVR, Jśnior NF. Effect of thermocycling and varying polymerization techniques on the restorative interface of class V cavities restored with different composite resin systems. J Clin Exp Dent. 2017;9(3):e405-9.

 

doi:10.4317/jced.53481

http://dx.doi.org/doi:10.4317/jced.53481

 

References

1. Buergers R, Schneider-Brachert W, Hahnel S, Rosentritt M, Handel G. Streptococcal adhesion to novel low-shrink silorane-based restorative. Dent Mater. 2009;25:269-75.
https://doi.org/10.1016/j.dental.2008.07.011
PMid:18768217

 

2. Marchesi G, Breschi L, Antoniolli F, Di Lenarda R, Ferracane J, Cadenaro M. Contraction stress of low-shrinkage composite materials assessed with different testing systems. Dent Mater. 2010;26:947-53.
https://doi.org/10.1016/j.dental.2010.05.007
PMid:20566212

 

3. Santini A, Vesna M. Comparison of the hybrid layer formed by silorane adhesive, one-step self-etch and etch and rinse systems using confocal micro-Raman spectroscopy and SEM. J Dent. 2008;36:683-91.
https://doi.org/10.1016/j.jdent.2008.04.016
PMid:18550251

 

4. Anusavice KJ. Phillips science of dental materials. Philadelphia: W.B Saunders Co; 1996.

 

5. Rueggeberg FA, Caughman WF, Curtis JW. Effect of light intensity and exposure duration on cure of resin composite. Oper Dent. 1994;19:26-32.
PMid:8183730

 

6. Plasse NP, Wenger F, Picard B, Colon P. Evaluation of microleakage of composite resin restorations by an electrochemical technique: the impedance methodology. Dent Mater. 2004;20:425-34.
https://doi.org/10.1016/j.dental.2003.06.003
PMid:15081548

 

7. Taha NA, Palamara JEA, Messer HH. Cuspal deflection, strain and microleakage of endodontically treated premolar teeth restored with direct resin composites. J Dent. 2009;37:724-30.
https://doi.org/10.1016/j.jdent.2009.05.027
PMid:19581032

 

8. Chandurkar AM, Metgud SS, Yakub SS, Usumez S. Evaluation of microleakage in class v composite restoration using different techniques of polymerization. Int J Prosthodont Restor Dent. 2012;31:10-5.
https://doi.org/10.5005/jp-journals-10019-1039

 

9. Chan DCN, Browning WD, Frazier KB, Brackett MG. Clinical evaluation of the soft-start (Pulse-delay) polymerization technique in class I and II composite restorations. Oper Dent. 2008;33:265-71.
https://doi.org/10.2341/07-120
PMid:18505216

 

10. Alomari Q, Ajlouni R, Omar R. Managing the polymerization shrinkage of resin composite restorations: a review. SABJ. 2007;62:12-8.

PMid:17427725

 

11. Gerdolle DA, Mortier E, Droz D. Microleakage and polymerization shrinkage of various polymer restorative materials. J Dent Child. 2008;75:125-33.

PMid:18647507

 

12. Watts DC, Hindi A. Intrinsic soft start polymerization shrinkage - kinetic in an acrylic based resin composite. Dent Mater. 1999;15:39-45.
https://doi.org/10.1016/S0109-5641(99)00012-3

PMid:10483394

 

13. Pereira JR, Jśnior LC, de Souza Almeida M, do Valle AL, Honório HM, Vidotti HA, et al. Effect of silorane-based adhesive system on bond strength between composite and dentin substrate. J Conserv Dent. 2015;18:488-91.
https://doi.org/10.4103/0972-0707.168833
PMid:26752846 PMCid:PMC4693325

 

14. Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dent Mater. 2005;21:68-74.
https://doi.org/10.1016/j.dental.2004.10.007
PMid:15681004

 

15. Ilie N, Kunzelmann KH, Hickel R. Evaluation of micro-tensile bond strengths of composite materials in comparison to their polymerization shrinkage. Dent Mater. 2006;22:593-601.
https://doi.org/10.1016/j.dental.2005.05.014
PMid:16289723

 

16. Eick DJ, Smith ER, Pinzino SC, Kostoryz EL. Stability of silorane dental monomers in aqueous systems. J Dent. 2006;34:405-10.
https://doi.org/10.1016/j.jdent.2005.09.004
PMid:16288948

 

17. Ferrari M, Goracci C, Sadek F, Kostoryz EL. Microtensile bond strength tests: scanning electron microscopy evaluation of sample integrity before testing. Eur J Oral Sci. 2002;110:385-91.
https://doi.org/10.1034/j.1600-0722.2002.21317.x
PMid:12664470

 

18. Eakle WS. Effect of thermal cycling on fracture strength and microleakage in teeth restored with a bonded composite resin. Dent Mater. 1986;2:114-7.
https://doi.org/10.1016/S0109-5641(86)80005-7

PMid:3525290

 

19. Soares GP, Ambrosano GM, Lima DA, Marchi GM, Correr-Sobrinho L, Lovadino JR, et al. Effect of light polymerization time, mode, and termal and mechanical load cycling on microleakage in resin composite restorations. Lasers Med Sci. 2014;29:545-50.
https://doi.org/10.1007/s10103-012-1244-7
PMid:23314786

 

20. Mehl A, Hickel R, Kunzelmann KH. Physical properties and gap formation of light-cured composites with and without "softstart-polymerization". J Dent. 1997;25:321-30.
https://doi.org/10.1016/S0300-5712(96)00044-9

PMid:9175364

 

21. Mehl A, Hickel R, Kunzelmann KH. Physical properties and gap formation of light-cured composites with and without "softstart-polymerization". J Dent 1997; 25:321-30.
https://doi.org/10.1016/S0300-5712(96)00044-9

PMid:9175364

 

22. Lopes MB, Serralvo AD, Felizardo KR, et al. Evaluation of the flexural resistance and stress contraction of a silorane-based composite submitted to different protocols of polymerization. Appl Adhes Sci. 2014;2:23.
https://doi.org/10.1186/s40563-014-0023-z