Ajami AA, Bahari M, Hassanpour-Kashani A, Abed-Kahnamoui M, Savadi-Oskoee A, Azadi-Oskoee F. Shear bond strengths of composite resin and giomer to mineral trioxide aggregate at different time intervals. J Clin Exp Dent. 2017;9(7):e906-11.

 

doi:10.4317/jced.53791

http://dx.doi.org/doi:10.4317/jced.53791

 

References

 

1. Aguilar P, Linsuwanont P. Vital pulp therapy in vital permanent teeth with cariously exposed pulp: a systematic review. J Endod. 2011;37:581-7.
https://doi.org/10.1016/j.joen.2010.12.004
PMid:21496652

 

2. Trope M. Regenerative potential of dental pulp. Pediatr Dent. 2008;30:206-10.
https://doi.org/10.1016/j.joen.2008.04.001

PMid:18615985

 

3. Tziafas D, Pantelidou O, Alvanou A, Belibasakis G, Papadimitriou S. The dentinogenic effect of mineral trioxide aggregate (MTA) in short-term capping experiments. Int Endod J. 2002;35:245-54.
https://doi.org/10.1046/j.1365-2591.2002.00471.x
PMid:11985676

 

4. Asgary S, Eghbal MJ. Treatment outcomes of pulpotomy in permanent molars with irreversible pulpitis using biomaterials: a multi-center randomized controlled trial. Acta Odontol Scand. 2013;71:130-6.
https://doi.org/10.3109/00016357.2011.654251
PMid:22339289

 

5. Eghbal MJ, Asgary S, Baglue RA, Parirokh M, Ghoddusi J. MTA pulpotomy of human permanent molars with irreversible pulpitis. Aust Endod J. 2009;35:4-8.
https://doi.org/10.1111/j.1747-4477.2009.00166.x
PMid:19335509

 

6. Min KS, Park HJ, Lee SK, Park SH, Hong CU, Kim HW, et al. Effect of mineral trioxide aggregate on dentin bridge formation and expression of dentin sialoprotein and heme oxygenase-1 in human dental pulp. J Endod. 2008;34:666-70.
https://doi.org/10.1016/j.joen.2008.03.009
PMid:18498885

 

7. Accorinte Mde L, Holland R, Reis A, Bortoluzzi MC, Murata SS, Dezan E Jr, et al. Evaluation of mineral trioxide aggregate and calcium hydroxide cement as pulp-capping agents in human teeth. J Endod. 2008;34:1-6.
https://doi.org/10.1016/j.joen.2007.09.012
PMid:18155482

 

8. Parolia A, Kundabala M, Rao NN, Acharya SR, Agrawal P, Mohan M, et al. A comparative histological analysis of human pulp following direct pulp capping with Propolis, mineral trioxide aggregate and Dycal. Aust Dent J. 2010;55:59-64.
https://doi.org/10.1111/j.1834-7819.2009.01179.x
PMid:20415913

 

9. Oskoee SS, Kimyai S, Bahari M, Motahari P, Eghbal MJ, Asgary S. Comparison of shear bond strength of calcium-enriched mixture cement and mineral trioxide aggregate to composite resin. J Contemp Dent Pract. 2011;12:457-62.
PMid:22269237

 

10. Savadi Oskoee S, Bahari M, Kimyai S, Motahhari P, Eghbal MJ, Asgary S. Shear bond strength of calcium enriched mixture cement and mineral trioxide aggregate to composite resin with two different adhesive systems. J Dent (Tehran). 2014;11:665-71.

PMid:25628696 PMCid:PMC4281188

 

11. Neelakantan P, Grotra D, Subbarao CV, Garcia-Godoy F. The shear bond strength of resin-based composite to white mineral trioxide aggregate. J Am Dent Assoc. 2012;143:e40-5.
https://doi.org/10.14219/jada.archive.2012.0302
PMid:22855910

 

12. Tunc ES, Sonmez IS, Bayrak S, Egilmez T. The evaluation of bond strength of a composite and a compomer to white mineral trioxide aggregate with two different bonding systems. J Endod. 2008;34:603-5.
https://doi.org/10.1016/j.joen.2008.02.026
PMid:18436044

 

13. Gordan VV, Mondragon E, Watson RE, Garvan C, Mjor IA. A clinical evaluation of a self-etching primer and a giomer restorative material: results at eight years. J Am Dent Assoc. 2007;138:621-7.
https://doi.org/10.14219/jada.archive.2007.0233
PMid:17473040

 

14. Sunico MC, Shinkai K, Katoh Y. Two-year clinical performance of occlusal and cervical giomer restorations. Oper Dent. 2005;30:282-9.
PMid:15986946

 

15. Wilson NH, Gordan VV, Brunton PA, Wilson MA, Crisp RJ, Mjor IA. Two-centre evaluation of a resin composite/ self-etching restorative system: three-year findings. J Adhes Dent. 2006;8:47-51.
PMid:16536345

 

16. Cantekin K, Avci S. Evaluation of shear bond strength of two resin-based composites and glass ionomer cement to pure tricalcium silicate-based cement (Biodentine(R)). J Appl Oral Sci. 2014;22:302-6.
https://doi.org/10.1590/1678-775720130660
PMid:25141202 PMCid:PMC4126826

 

17. Parirokh M, Torabinejad M. Mineral trioxide aggregate: a comprehensive literature review--Part I: chemical, physical, and antibacterial properties. J Endod. 2010;36:16-27.
https://doi.org/10.1016/j.joen.2009.09.006
PMid:20003930

 

18. Shin JH, Jang JH, Park SH, Kim E. Effect of mineral trioxide aggregate surface treatments on morphology and bond strength to composite resin. J Endod. 2014;40:1210-6.
https://doi.org/10.1016/j.joen.2014.01.027
PMid:25069935

 

19. Kayahan MB, Nekoofar MH, Kazandag M, Canpolat C, Malkondu O, Kaptan F, et al. Effect of acid-etching procedure on selected physical properties of mineral trioxide aggregate. Int Endod J. 2009;42:1004-14.
https://doi.org/10.1111/j.1365-2591.2009.01610.x
PMid:19732179

 

20. Bayrak S, Tunc ES, Saroglu I, Egilmez T. Shear bond strengths of different adhesive systems to white mineral trioxide aggregate. Dent Mater J. 2009;28:62-7.
https://doi.org/10.4012/dmj.28.62
PMid:19280969

 

21. Cardoso Pde C, Lopes GC, Vieira LC, Baratieri LN. Effect of solvent type on microtensile bond strength of a total-etch one-bottle adhesive system to moist or dry dentin. Oper Dent. 2005;30:376-81.
PMid:15986959

 

22. Pashley EL, Zhang Y, Lockwood PE, Rueggeberg FA, Pashley DH. Effects of HEMA on water evaporation from water-HEMA mixtures. Dent Mater. 1998;14:6-10.
https://doi.org/10.1016/S0109-5641(98)00003-7

PMid:9972145

 

23. Imazato S, Russell RR, McCabe JF. Antibacterial activity of MDPB polymer incorporated in dental resin. J Dent. 1995;23:177-81.
https://doi.org/10.1016/0300-5712(95)93576-N

PMIDid7782530

 

24. Van Landuyt KL, Snauwaert J, De Munck J, Peumans M, Yoshida Y, Poitevin A, et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials. 2007;28:3757-85.
https://doi.org/10.1016/j.biomaterials.2007.04.044
PMid:17543382

 

25. Davidson CL, de Gee AJ, Feilzer A. The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res. 1984;63:1396-9.
https://doi.org/10.1177/00220345840630121101
PMid:6239886

 

26. Teixeira CS, Chain MC. Evaluation of shear bond strength between self-etching adhesive systems and dentin and analysis of the resin-dentin interface. Gen Dent. 2010;58:e52-61.
PMid:20236904

 

27. Ballal S, Venkateshbabu N, Nandini S, Kandaswamy D. An in vitro study to assess the setting and surface crazing of conventional glass ionomer cement when layered over partially set mineral trioxide aggregate. J Endod. 2008;34:478-80.
https://doi.org/10.1016/j.joen.2008.01.020
PMid:18358902

 

28. Nandini S, Ballal S, Kandaswamy D. Influence of glass-ionomer cement on the interface and setting reaction of mineral trioxide aggregate when used as a furcal repair material using laser Raman spectroscopic analysis. J Endod. 2007;33:167-72.
https://doi.org/10.1016/j.joen.2006.10.010
PMid:17258638

 

29. Camilleri J, Pitt Ford TR. Mineral trioxide aggregate: a review of the constituents and biological properties of the material. Int Endod J. 2006;39:747-54.
https://doi.org/10.1111/j.1365-2591.2006.01135.x
PMid:16948659