|
1. Salgueiro MI,
Stevens MR. Experience with the Use of Prebent Plates for the
Reconstruction of Mandibular Defects. J Craniomaxillofacial Trauma
Reconstruction. 2010;3:201-8.
https://doi.org/10.1055/s-0030-1268520
PMid:22132258 PMCid:PMC3052711
|
|
|
|
2. Cohen A, Laviv A,
Berman P, Nashef R, Abu-Tair J. Mandibular Reconstruction using
stereolithographic 3-Dimentional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod.
2009;108:661-6.
https://doi.org/10.1016/j.tripleo.2009.05.023
PMid:19716728
|
|
|
|
|
3. Rahimov C,
Farzaliyev I. Virtual Bending of Titanium Reconstructive Plates for
Mandibular Defect Bridging: Review of Three Clinical Cases.
Craniomaxillofacial Trauma & Reconstruction. 2011;4:223-34.
https://doi.org/10.1055/s-0031-1293523
PMid:23205175 PMCid:PMC3314258
|
|
|
|
|
4. Yovchev D,
Stanimirov P, Mihaylova Hr. Lower Jaw Reconstruction Using Prototype from
Cone-Beam Computed Tomography Data, International Journal of Science and
Research. 2014;3:57-9.
|
|
|
|
|
5. Nayar S,
Bhuminathan S, Bhat WM. Rapid prototyping and stereolithography in
dentistry. Journal of Pharmacy & Bioallied Sciences. 2015;7(Suppl
1):S216-9.
https://doi.org/10.4103/0975-7406.155913
PMid:26015715 PMCid:PMC4439675
|
|
|
|
|
6. Winder J. Bibb R,
Medical rapid prototyping technologies; state of the art and current
limitations for application in oral and maxillofacial surgery. J Oral
Maxillofac Surg. 2005;63:1006-15.
https://doi.org/10.1016/j.joms.2005.03.016
PMid:16003630
|
|
|
|
|
7. Mankovich NJ,
Cheeseman AM, Stoker N G. The display of three-dimensional anatomy with
stereolithographic models. J Digit Imaging. 1990;3:200-3.
https://doi.org/10.1007/BF03167610
PMid:2085555
|
|
|
|
|
8. Ventola CL. Medical
Applications for 3D Printing: Current and Projected Uses. Pharmacy
and Therapeutics. 2014;39:704-11.
PMid:25336867 PMCid:PMC4189697
|
|
|
|
|
9. Cunningham L,
Madsen M, Peterson G. Stereolithographic modeling technology applied to
tumor resection. J
Oral Maxillofacial surgery. 2005;63:873-8.
https://doi.org/10.1016/j.joms.2005.02.027
PMid:15944992
|
|
|
|
|
10. Barker TM,
Earwaker WJS, Lisle DA. Accuracy of stereolithographic models for human
anatomy. Australasian
Radiology. 1994;38:106.
https://doi.org/10.1111/j.1440-1673.1994.tb00146.x
PMid:8024501
|
|
|
|
|
11. P.Mehra, J.Miner,
R D'Innocenzo, M.Nadershah Use of 3-D Stereolithographic Models in Oral
and Maxillofacial Surgery. J Oral Maxillofacial Surgery. 2011;10:6-13.
https://doi.org/10.1007/s12663-011-0183-3
PMid:22379314 PMCid:PMC3177510
|
|
|
|
|
12. Lee Ventola C.
Medical applications for 3D printing: current and projected uses. P T.
2014;39:704–11.
|
|
|
|
|
13. Fullerton JN,
Frodsham GC, Day RM. 3D printing for the many, not the few. Nat
Biotechnol. 2014;32:1086-7.
https://doi.org/10.1038/nbt.3056
PMid:25380438
|
|
|
|
|
14. Chae MP, Rozen WM,
McMenamin PG, Findlay MW, Spychal RT and Hunter-Smith DJ. Emerging
applications of bedside 3D printing in plastic surgery. Front. Surg.
2015;2:25.
https://doi.org/10.3389/fsurg.2015.00025
PMid:26137465 PMCid:PMC4468745
|
|
|
|
|
15. Cohen A, et al.
Mandibular reconstruction using stereolithographic 3- dimensional
printing modeling technology. Oral surgery, oral medicine, oral
pathology, oral radiology, and endodontics. 2009;108:661-6.
https://doi.org/10.1016/j.tripleo.2009.05.023
PMid:19716728
|
|
|
|
|
16. Eckardt A, Swennen
GR. Virtual planning of composite mandibular reconstruction with free
fibula bone graft. The Journal of craniofacial surgery. 2005;16:1137-40.
https://doi.org/10.1097/01.scs.0000186306.32042.96
PMid:16327572
|
|
|
|
|
17. Juergens P, Krol Z, Zeilhofer HF, Beinemann J, Schicho K, Ewers R, et al. Computer simulation and rapid
prototyping for the reconstruction of the mandible. Journal of oral and
maxillofacial surgery. 2009;67:2167-70.
https://doi.org/10.1016/j.joms.2009.04.104
PMid:19761910
|
|
|
|
|
18. Roser SM, Ramachandra S, Blair H, Grist W, Carlson GW, Christensen AM, et al. The accuracy of virtual surgical
planning in free fibula mandibular reconstruction: comparison of planned
and final results. Journal of oral and maxillofacial surgery. 2010;
68(11):2824-32.
https://doi.org/10.1016/j.joms.2010.06.177
PMid:20828910
|
|
|
|
|
19. Król Z, Chlebiej M, Zerfass P, Sader R, Zeilhofer HF, Mikołajczak P, et al. Surgery planning tools for the osseous
grafting treatment. Biomedizinische Technik. Biomedical engineering.
2002;47(Suppl 1 Pt 1):97-100.
https://doi.org/10.1515/bmte.2002.47.s1a.97
PMid:12451783
|
|
|
|
|
20. Derand P, Hirsch
JM. Virtual bending of mandibular reconstruction plates using a
computer-aided design. Journal of oral and maxillofacial surgery. 2009;67:1640-3.
https://doi.org/10.1016/j.joms.2009.03.039
PMid:19615575
|
|
|
|
|
21. Toro C, Robiony M,
Costa F, Zerman N, Politi M. Feasibility of preoperative planning using
anatomical facsimile models for mandibular reconstruction. Head Face Med.
2007;3:1746-60.
https://doi.org/10.1186/1746-160X-3-5
PMid:17224060 PMCid:PMC1783647
|
|