1. Fromentin O, Lassauzay C, Abi Nader S, Feine J, de Albuquerque Junior RF. Testing the retention of attachments for implant overdentures - validation of an original force measurement system. J Oral Rehabil. 2010;37:54–62.
https://doi.org/10.1111/j.1365-2842.2009.02020.x
PMid:19912482

2. Lehmann KM. Studies on the retention forces of snap-on attachments. Quintessence Dent Technol. 1978;7:45–8.

3. Feine JS, Carlsson GE. The McGill Consensus Statement on Overdentures. Int J Prosthodont. 2002;15:413–4.
PMid:12170858

4. Besimo CE, Guarneri A. In vitro retention force changes of prefabricated attachments for overdentures. J Oral Rehabil. 2003;30:671–8.
https://doi.org/10.1046/j.1365-2842.2003.01140.x

5. Gamborena JI, Hazelton LR, NaBadalung D, Brudvik J. Retention of ERA direct overdenture attachments before and after fatigue loading. Int J Prosthodont. 1997;10:123–30.
PMid:9206451

6. Alsabeeha NHM, Payne AGT, Swain MV. Attachment systems for mandibular two-implant overdentures: a review of in vitro investigations on retention and wear features. Int J Prosthodont. 2009;22:429–40.
PMid:20095190

7. Scherer M, McGlumphy E. Comparison of Retention and Stability of Implant-Retained Overdentures Based upon Implant Number and Distribution. Int J Oral Maxillofac Implant. 2013;28:1619–28.
https://doi.org/10.11607/jomi.3067
PMid:24278931

8. Kobayashi M, Srinivasan M, Ammann P, Perriard J, Ohkubo C, Müller F, et al. Effects of in vitro cyclic dislodging on retentive force and removal torque of three overdenture attachment systems. Clin Oral Implants Res. 2014;25:426–34.
https://doi.org/10.1111/clr.12156
PMid:23566266

9. Rutkunas V, Mizutani H, Takahashi H, Iwasaki N. Wear simulation effects on overdenture stud attachments. Dent Mater J. 2011;30:845–53.
https://doi.org/10.4012/dmj.2011-057
PMid:22123008

10. Chung KH, Chung CY, Cagna DR, Cronin RJ. Retention characteristics of attachment systems for implant overdentures. J Prosthodont. 2004;13:221–6.
https://doi.org/10.1111/j.1532-849X.2004.04042.x
PMid:15610542

11. Jabbour Z, Fromentin O, Lassauzay C, Abi Nader S, Correa JA, Feine J, et al. Effect of implant angulation on attachment retention in mandibular two-implant overdentures: A clinical study. Clin Implant Dent Relat Res. 2014;16:565–71.
https://doi.org/10.1111/cid.12030
PMid:23305358

12. Rutkunas V, Mizutani H, Takahashi H. Influence of attachment wear on retention of mandibular overdenture. J Oral Rehabil. 2007;34:41–51.
https://doi.org/10.1111/j.1365-2842.2006.01640.x
PMid:17207077

13. Trakas T, Michalakis K, Kang K, Hirayama H. Attachment systems for implant retained overdentures: a literature review. Implant Dent. 2006;15:24–34.
https://doi.org/10.1097/01.id.0000202419.21665.36
PMid:16569958

14. Rutkunas V, Mizutani H, Takahashi H. Evaluation of stable retentive properties of overdenture attachments. Stomatologija. 2005;7:115–20.
PMid:16501313

15. Alsabeeha N, Atieh M, Swain M, Payne A. Attachment Systems for Mandibular Single-Implant Overdentures: An In Vitro Retention Force Investigation on Different Designs. Int J Prosthodont. 2010;23:160–6.
PMid:20305857

16. Pigozzo MN, Mesquita MF, Henriques GEP, Vaz LG. The service life of implant-retained overdenture attachment systems. J Prosthet Dent. 2009;102:74–80.
https://doi.org/10.1016/S0022-3913(09)60112-8

17. Setz J, Lee S, Engel E. Retention of prefabricated attachments for implant stabilized overdentures in the edentulous mandible: An in vitro study. J Prosthet Dent. 1998;80:323¬9.

18. Al-Ghafli SA, Michalakis KX, Hirayama H, Kang K. The in vitro effect of different implant angulations and cyclic dislodgement on the retentive properties of an overdenture attachment system. J Prosthet Dent. 2009;102:140–7.
https://doi.org/10.1016/S0022-3913(09)60134-7

19. Yang TC, Maeda Y, Gonda T, Kotecha S. Attachment systems for implant overdenture: influence of implant inclination on retentive and lateral forces. Clin Oral Implants Res. 2011;22:1315–9.
https://doi.org/10.1111/j.1600-0501.2010.02137.x
PMid:21426402

20. Wolf K, Ludwig K, Hartfil H, Kern M. Analysis of retention and wear of ball attachments. Quintessence Int. 2009;40:405–12.
PMid:19582245

21. Cakarer S, Can T, Yaltirik M, Keskin C. Complications associated with the ball, bar and Locator attachments for implant-supported overdentures. Med Oral Patol Oral y Cir Bucal. 2011;16:953–9.
https://doi.org/10.4317/medoral.17312

22. Takeshita S, Kanazawa M, Minakuchi S. Stress analysis of mandibular two-implant overdenture with different attachment systems. Dent Mater J. 2011;30:928–34.
https://doi.org/10.4012/dmj.2011-134
PMid:22123019

23. Sarnat A. The efficiency of cobal samarium (Co5Sm) magnets as retention units for overdentures. J Dent. 1983;11:324–33.
https://doi.org/10.1016/0300-5712(83)90117-3

24. Petropoulos VC, Smith W, Kousvelari E. Comparison of retention and release periods for implant overdenture attachments. Int J Oral Maxillofac Implants. 1997;12:176–85.
PMid:9109267

25. Sadig W. A comparative in vitro study on the retention and stability of implant-supported overdentures. Quintessence Int. 2009;40:313–9.
PMid:19417876

26. Caldwell R. Adhesion of foods to teeth. J Dent Res. 1962;41:821–32.
https://doi.org/10.1177/00220345620410041401
PMid:13875718