Fallahzadeh F, Atai M, Ghasemi S, Mahdkhah A. Effect of rinsing time and surface contamination on the bond strength of silorane-based and dimethacrylate-based composites to enamel. J Clin Exp Dent. 2018;10(11):e1115-22.

doi:10.4317/jced.55148

http://dx.doi.org/doi:10.4317/jced.55148

References

1. Yamazaki PC, Bedran-Russo AK, Pereira PN, Wsift EJ, Jr. Microleakage evaluation of a new low-shrinkage composite restorative material. Operative dentistry. 2006;31:670-6. https://doi.org/10.2341/05-129 PMid:17153975

2. Bagis YH, Baltacioglu IH, Kahyaogullari S. Comparing microleakage and the layering methods of silorane-based resin composite in wide Class II MOD cavities. Operative dentistry. 2009;34:578-85. https://doi.org/10.2341/08-073-LR PMid:19830973

3. Van Ende A, De Munck J, Mine A, Lambrechts P, Van Meerbeek B. Does a low-shrinking composite induce less stress at the adhesive interface? Dental materials : official publication of the Academy of Dental Materials. 2010;26:215-22. https://doi.org/10.1016/j.dental.2009.10.003 PMid:19906417

4. ODIAN G. principles of polymerization. 4th ed: John Wiley & Sons, Inc, publication; 4Th Ed. 2004. p. 445-8.

5. Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dental materials : official publication of the Academy of Dental Materials. 2005;21:68-74. https://doi.org/10.1016/j.dental.2004.10.007 PMid:15681004

6. Lai JH, Johnson AE. Measuring polymerization shrinkage of photo-activated restorative materials by a water-filled dilatometer. Dental materials : official publication of the Academy of Dental Materials. 1993;9:139-43. https://doi.org/10.1016/0109-5641(93)90091-4

7. Yamazaki PCV, Bedran-Russo AKB, Pereira PNR, Jr EJS. Microleakage Evaluation of a New Low-shrinkage Composite Restorative Material. Operative dentistry. 2006;31:670-6. https://doi.org/10.2341/05-129 PMid:17153975

8. Papadogiannis D, Kakaboura A, Palaghias G, Eliades G. Setting characteristics and cavity adaptation of low-shrinking resin composites. Dental Materials. 2009;25:1509-16. https://doi.org/10.1016/j.dental.2009.06.022 PMid:19698981

9. Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dental Materials. 2005;21:68-74. https://doi.org/10.1016/j.dental.2004.10.007 PMid:15681004

10. Tantbirojn D, Pfeifer CS, Braga RR, Versluis A. Do low-shrink composites reduce polymerization shrinkage effects?. Journal of dental research. 2011;90:596-601. https://doi.org/10.1177/0022034510396217 PMid:21282725

11. Leprince J, Palin WM, Mullier T, Devaux J, Vreven J, Leloup G. Investigating filler morphology and mechanical properties of new low-shrinkage resin composite types. Journal of oral rehabilitation. 2010;37:364-76. https://doi.org/10.1111/j.1365-2842.2010.02066.x PMid:20202096

12. Kostoryz EL, Zhu Q, Zhao H, Glaros AG, Eick JD. Assessment of cytotoxicity and DNA damage exhibited by siloranes and oxiranes in cultured mammalian cells. Mutation research. 2007;634:156-62. https://doi.org/10.1016/j.mrgentox.2007.07.003 PMid:17719836

13. Turner C, courts FJ, Gombala GG. The removal of phosphoric acid and calcium phosphate precipitates: an analysis of rinse time. Pediatric Dentistry. 1987;9:208-11. PMid:3333827

14. Williams B, von Fraunhofer JA. The influence of the time of etching and washing on the bond strength of fissure sealants applied to enamel. Journal of oral rehabilitation. 1977;4:139-43. https://doi.org/10.1111/j.1365-2842.1977.tb00976.x PMid:323435

15. Bates D, Retief DH, Jamison HC, Denys FR. Effects of acid etch parameters on enamel topography and composite resin--enamel bond strength. Pediatric dentistry. 1982;4:106-10. PMid:6752904

16. Mixson JM, Eick JD, Tira DE, Moore DL. The effects of rinse volumes and air and water pressures on enamel-composite resin bond strength. The Journal of prosthetic dentistry. 1989;62:522-6. https://doi.org/10.1016/0022-3913(89)90071-1

17. Ma WC, Nelson S, Grothe P, Butterbaugh J. Better wet bench productivity via a new method of rinse optimization. (Wafer Cleaning). Solid State Technology. Apr. 2003;46:41-44.

18. Chang SW, Cho BH, Lim RY, Kyung SH, Park DS, Oh TS, et al. Effects of blood contamination on microtensile bond strength to dentin of three self-etch adhesives. Operative dentistry. 2010;35:330-6. https://doi.org/10.2341/09-244-L PMid:20533634

19. Xie J, Powers JM, McGuckin RS. bond strength of two adhesives to enamel and dentin under normal and contaminated conditions. Dental Materials. 1993;9:295-9. https://doi.org/10.1016/0109-5641(93)90046-S

20. Shimada Y, Senawongse P, Harnirattisai C, Burrow MF, Nakaoki Y, Tagami J. Bond strength of two adhesive systems to primary and permanent enamel. Operative dentistry. 2002;27:403-9. PMid:12120779

21. Bicalho A, Pereira R, Zanatta R, Franco S, Tantbirojn D, Versluis A, et al. Incremental Filling Technique and Composite Material—Part I: Cuspal Deformation, Bond Strength, and Physical Properties. Operative dentistry. 2014;39:e71-e82. https://doi.org/10.2341/12-441-L PMid:24147769

22. Lien W, Vandewalle KS. Physical properties of a new silorane-based restorative system. Dental materials : official publication of the Academy of Dental Materials. 2010;26:337-44. https://doi.org/10.1016/j.dental.2009.12.004 PMid:20053434

23. Knežević A, Tarle Z, Meniga A, Šutalo J, Pichler G, Ristić M. Degree of Conversion and Temperature Measurement of Composite Polymerised with Halogen and LED-Curing Unit. Acta stomatologica Croatica. 2003;37:165-8.

24. Boaro LC, Goncalves F, Guimaraes TC, Ferracane JL, Versluis A, Braga RR. Polymerization stress, shrinkage and elastic modulus of current low-shrinkage restorative composites. Dental materials : official publication of the Academy of Dental Materials. 2010;26:1144-50. https://doi.org/10.1016/j.dental.2010.08.003 PMid:20832850

25. Baracco B, Fuentes MV, Ceballos L. Five-year clinical performance of a silorane- vs a methacrylate-based composite combined with two different adhesive approaches. Clinical Oral Investigations. 2016;20:991-1001. https://doi.org/10.1007/s00784-015-1591-4 PMid:26388406

26. Taskonak B, Sertgoz A. Shear bond strengths of saliva contaminated 'one-bottle' adhesives. Journal of oral rehabilitation. 2002;29:559-64. https://doi.org/10.1046/j.1365-2842.2002.00860.x PMid:12071925

27. Jiang Q, Pan H, Liang B, Fu B, Hannig M. Effect of saliva contamination and decontamination on bovine enamel bond strength of four self-etching adhesives. Operative dentistry. 2010;35:194-202. https://doi.org/10.2341/09-151-L PMid:20420063

28. Guo HJ, Gao CZ, Lin F, Liu W, Yue L. [Effects of saliva contamination on bond strength of resin-resin interfaces]. Beijing da xue xue bao Yi xue ban = Journal of Peking University Health sciences. 2017;49:96-100.

29. Munaga S, Chitumalla R, Kubigiri SKR, Rawtiya M, Khan S, Sajjan P. Effect of saliva contamination on the shear bond strength of a new self-etch adhesive system to dentin. Journal of conservative dentistry:JCD. 2014;17:31-4. https://doi.org/10.4103/0972-0707.124124 PMid:24554857 PMCid:PMC3915382