Zakavi F, Mombeini M, Dibazar S, Gholizadeh S. Evaluation of shear bond strength of zirconia to composite resin using different adhesive systems. J Clin Exp Dent. 2019;11(3):e257-63.

doi:10.4317/jced.55428

http://dx.doi.org/10.4317/jced.55428

______________________________________________________________________________________________________________________________

References

1. Scarano A, Di Carlo F, Quaranta M, Piattelli A. Bone response to zirconia ceramic implants: an experimental study in rabbits. J Oral Implantol. 2003;29:8–12. https://doi.org/10.1563/1548-1336(2003)029<0008:BRTZCI>2.3.CO;2 PMid:12614079

2. Saito A, Komine F, Blatz MB, Matsumura H. A comparison of bond strength of layered veneering porcelains to zirconia and metal. J Prosthet Dent. 2010;104:247–57. https://doi.org/10.1016/S0022-3913(10)60133-3 PMid:20875529

3. Triwatana P, Nagaviroj N, Tulapornchai C. Clinical performance and failures of zirconia-based fixed partial dentures: a review literature. J Adv Prosthodont. 2012;4:76–83. https://doi.org/10.4047/jap.2012.4.2.76 PMid:22737311 PMCid:PMC3381206

4. Schmitt J, Wichmann M, Karl M, Göllner M, Lohbauer U, Hoist S. Surface characteristics of zirconia-based posterior restorations: clinical and scanning electron microscopic analysis. J Can Dent Assoc (Tor). 2011;77:111. PMid:21507284

5. Kimmich M, Stappert CFJ. Intraoral treatment of veneering porcelain chipping of fixed dental restorations: a review and clinical application. J Am Dent Assoc. 2013;144:31–44. https://doi.org/10.14219/jada.archive.2013.0011 PMid:23283924

6. Sui T, Dragnevski K, Neo TK. Mechanisms of failure in porcelain-veneered sintered zirconia restorations. In: ICF13. 2013.

7. Bagis B, Ustaomer S, Lassila LVJ, Vallittu PK. Provisional repair of a zirconia fixed partial denture with fibre-reinforced restorative composite: a clinical report. J Can Dent Assoc (Tor). 2009;75:133-7. PMid:19267965

8. Attia A. Influence of surface treatment and cyclic loading on the durability of repaired all-ceramic crowns. J Appl Oral Sci. 2010;18:194–200. https://doi.org/10.1590/S1678-77572010000200015 PMid:20485932 PMCid:PMC5349757

9. Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now? Dent Mater. 2011;27:71–82. https://doi.org/10.1016/j.dental.2010.10.022 PMid:21094526 PMCid:PMC3046396

10. Usumez A, Hamdemirci N, Koroglu BY, Simsek I, Parlar O, Sari T. Bond strength of resin cement to zirconia ceramic with different surface treatments. Lasers Med Sci. 2013;28:259–66. https://doi.org/10.1007/s10103-012-1136-x PMid:22718473

11. Ma G, Mn A. Bonding to Zirconia (A Systematic Review). J Dent Sci. 2016;1–20.

12. Moon JE, Kim SH, Lee JB, Han JS, Yeo IS, Ha SR. Effects of airborne-particle abrasion protocol choice on the surface characteristics of monolithic zirconia materials and the shear bond strength of resin cement. Ceram Int. 2016;42:1552–62. https://doi.org/10.1016/j.ceramint.2015.09.104

13. Ural Ç, Külünk T, Külünk Ş, Kurt M, Baba S. Determination of resin bond strength to zirconia ceramic surface using different primers. Acta Odontol Scand. 2011;69:48–53. https://doi.org/10.3109/00016357.2010.517558 PMid:20873994

14. Fukegawa D, Hayakawa S, Yoshida Y, Suzuki K, Osaka A, Van Meerbeek B. Chemical interaction of phosphoric acid ester with hydroxyapatite. J Dent Res. 2006;85:941–4. https://doi.org/10.1177/154405910608501014 PMid:16998137

15. Perdigao J, Fernandes SD, Pinto AM, Oliveira FA. Effect of artificial aging and surface treatment on bond strengths to dental zirconia. Oper Dent. 2013;38:168–76. https://doi.org/10.2341/11-489-L PMid:22788723

16. Alex G. Universal adhesives: the next evolution in adhesive dentistry. Compend Contin Educ Dent. 2015;36:15–26. PMid:25822403

17. Sharafeddin F, Shoale S. Effects of Universal and Conventional MDP Primers on the Shear Bond Strength of Zirconia Ceramic and Nanofilled Composite Resin. J Dent. 2018;19:48. PMid:29492416 PMCid:PMC5817343

18. Suh BI, Feng L, Pashley DH, Tay FR. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers. J Adhes Dent. 2003;5:267-82. PMid:15008334

19. Chen L, Shen H, Suh BI. Effect of incorporating BisGMA resin on the bonding properties of silane and zirconia primers. J Prosthet Dent. 2013;110:402–7. https://doi.org/10.1016/j.prosdent.2013.04.005 PMid:24007793

20. Sanohkan S, Kukiattrakoon B, Larpboonphol N, Sae-Yib T, Jampa T, Manoppan S. The effect of various primers on shear bond strength of zirconia ceramic and resin composite. J Conserv Dent JCD. 2013;16:499. https://doi.org/10.4103/0972-0707.120948 PMid:24347881 PMCid:PMC3842715

21. Sreekala L, Narayanan M, Eerali SM, Eerali SM, Varghese J. Comparative evaluation of shear bond strengths of veneering porcelain to base metal alloy and zirconia substructures before and after aging–An in vitro study. J Int Soc Prev Community Dent. 2015;5:S74. https://doi.org/10.4103/2231-0762.171590 PMid:26942121 PMCid:PMC4756571

22. Chen C, Chen Y, Lu Z, Qian M, Xie H, Tay FR. The effects of water on degradation of the zirconia-resin bond. J Dent. 2017;64:23–9. https://doi.org/10.1016/j.jdent.2017.04.004 PMid:28414171

23. Barragan G, Chasqueira F, Arantes-Oliveira S, Portugal J. Ceramic repair: influence of chemical and mechanical surface conditioning on adhesion to zirconia. Oral Heal Dent Manag. 2014;13:155–8. PMid:24984615

24. Kern M, Thompson VP. Sandblasting and silica-coating of dental alloys: volume loss, morphology and changes in the surface composition. Dent Mater. 1993;9:155–61. https://doi.org/10.1016/0109-5641(93)90113-5 PMid:8056169

25. Arami S, Tabatabae MH, Namdar SF, Chiniforush N. Effects of different lasers and particle abrasion on surface characteristics of zirconia ceramics. J Dent (Tehran). 2014;11:233. PMid:24910700 PMCid:PMC4043556

26. Yang B, Barloi A, Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater. 2010;26:44–50. https://doi.org/10.1016/j.dental.2009.08.008 PMid:19766300

27. Pott PC, Stiesch M, Eisenburger M. Influence of 10-MDP Adhesive System on Shear Bond Strength of Zirconia-Composite Interfaces. J Dent Mater Tech. 2015;4:117–26.

28. Chen L, Suh BI, Brown D, Chen X. Bonding of primed zirconia ceramics: evidence of chemical bonding and improved bond strengths. Am J Dent. 2012;25:103–8. PMid:22779284

29. Chen C, Niu LN, Xie H, Zhang ZY, Zhou L-Q, Jiao K, et al. Bonding of universal adhesives to dentine–Old wine in new bottles? J Dent. 2015;43:525–36. https://doi.org/10.1016/j.jdent.2015.03.004 PMid:25797702

30. Nagaoka N, Yoshihara K, Feitosa VP, Tamada Y, Irie M, Yoshida Y, et al. Chemical interaction mechanism of 10-MDP with zirconia. Sci Rep. 2017;7:45563. https://doi.org/10.1038/srep45563 PMid:28358121 PMCid:PMC5372092

31. Wang C, Niu L, Wang Y, Jiao K, Liu Y, Zhou W, et al. Bonding of resin cement to zirconia with high pressure primer coating. PLoS One. 2014;9:e101174. https://doi.org/10.1371/journal.pone.0101174 PMid:24992678 PMCid:PMC4081122

32. Brueckner C, Schneider H, Haak R. Shear bond strength and tooth-composite interaction with self-adhering flowable composites. Oper Dent. 2017;42:90–100. https://doi.org/10.2341/15-365-L PMid:27802122

33. Thammajaruk P, Inokoshi M, Chong S, Guazzato M. Bonding of composite cements to zirconia: A systematic review and meta-analysis of in vitro studies. J Mech Behav Biomed Mater. 2018;80:258-268. https://doi.org/10.1016/j.jmbbm.2018.02.008 PMid:29454279

34. Amaral M, Belli R, Cesar PF, Valandro LF, Petschelt A, Lohbauer U. The potential of novel primers and universal adhesives to bond to zirconia. J Dent [Internet]. 2014;42:90–8. https://doi.org/10.1016/j.jdent.2013.11.004 PMid:24246687

35. Seabra B, Arantes-Oliveira S, Portugal J. Influence of multimode universal adhesives and zirconia primer application techniques on zirconia repair. J Prosthet Dent. 2014;112:182–7. https://doi.org/10.1016/j.prosdent.2013.10.008 PMid:24445031