Satyanarayana TSV, Rai R, Subramanyam E, Illango T, Mutyala V, Akula R. Finite element analysis of stress concentration between surface coated implants and non surface coated implants - An in vitro study. J Clin Exp Dent. 2019;11(8):e713-20.

 

doi:10.4317/jced.55915

http://dx.doi.org/doi:10.4317/jced.55915

 

References

1. Dunlap J. implants: implication for general dentists. dent econ.1988; 78:101-12.

 

2. Fathima M, Sinha N, Ali SM. Failures in Dental Implants: A Review. Int J Adv Health Sci. 2017;4 :5-9.

 

3. Resham Maheshwari, Vikas Punia, Meenakshi Khandelwal, Vivek Sharma, Saransh Malot and Anand Porwal. Implant failure and management: A review. 2018;4:293-8.

 

4. Janovic A, Saveljic I, Vukicevic A. Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: a three-dimensional finite element study. Ann Anat. 2015;197:16-2.
https://doi.org/10.1016/j.aanat.2014.09.002
PMid:25458179

 

5. Bidez MW, Misch CE. Clinical Biomechanics in Implant dentistry In: Misch CE. Contemporary Implant Dentistry. 1995;2:303-16.

 

6.Skalak R. Biomechanical consideration of Osseointegrated prosthesis. J Prosthet Dent. 1983;49:843-8.
https://doi.org/10.1016/0022-3913(83)90361-X

 

7. R. R. K. Jingade, I. V. Rudraprasad, R. Sangur. Biomechanics of dental implants: A FEM study. JIPS. 2017;5:18-22.
https://doi.org/10.4103/0972-4052.16336

 

8.Lee SY, Koak JY, Kim SK. A long-term prospective evaluation of marginal bone level change around different implant systems. Int J Oral Maxillofac Implants. 2016;31:657-64.
https://doi.org/10.11607/jomi.3932
PMid:27183075

 

9. Sannino G. All-on-4 concept: A 3-dimensional finite element analysis. J Oral Implantol. 2015;41:163-71.
https://doi.org/10.1563/AAID-JOI-D-12-00312
PMid:23560570

 

10. Mohammed Ibrahim M, Thulasingam C, Nasser KS, Balaji V, Rajakumar M, Rupkumar P. Evaluation of design parameters of dental implant shape, diameter and length on stress distribution: A finite element analysis. J Indian Prosthodont Soc. 2011;11:165-71.
https://doi.org/10.1007/s13191-011-0095-4
PMid:22942576 PMCid:PMC3175233

 

11. Verma M, Nanda A, Sood A. Principles of occlusion in implant dentistry. J Int Clin Dent Res Organ. 2015;7:27-33
https://doi.org/10.4103/2231-0754.172924

 

12. Kim Y, Oh TJ, Misch CE, Wang HL. Occlusal considerations in implant therapy: Clinical guidelines with biomechanical rationale. Clin Oral Implants Res. 2005;16:26-35.
https://doi.org/10.1111/j.1600-0501.2004.01067.x
PMid:15642028

 

13. Oguz Eraslana, Ozgur Inanb ,Asli Secilmisc. The Effect of Framework Design on Stress Distribution in Implant-Supported FPDs: A 3-D FEM Study. European Journal of Dentistry. 2010;4: 374-82

 

14. Chun HJ, Shin HS, Han CH, Lee SH. Influence of implant abutment type on stress distribution in bone under various loading conditions using finite element analysis. Int J Oral Maxillofac Implants. 2006;21:195-202.

 

15. Kumararama SS, Chowdhary R. Selection of dental implants based on masticatory load of the patient: A novel approach. Indian J Dent Res. 2017;28:309-13.
https://doi.org/10.4103/ijdr.IJDR_124_16
PMid:28721997

 

16. Rieger MR, Fareed K, Adams WK, Tanquist RA. Bone stress distribution for three endosseous implants. J Prosthet Dent. 1989;61:223-8.
https://doi.org/10.1016/0022-3913(89)90379-X

 

17. Jafarian M, Mirhashemi FS, Emadi N. Finite element analysis of stress distribution around a dental implant with different amounts of bone loss: An in vitro study. Dent Med Probl. 2019;56:27-32.
https://doi.org/10.17219/dmp/102710
PMid:30951618

 

18. Mumcu E, Bilhan H, Cekici A. Marginal bone loss around implants supporting fixed restorations. J Oral Implantol. 2011;37:549-58.
https://doi.org/10.1563/AAID-JOI-D-10-00018
PMid:20712440

 

19. GuljeF., Abrahamsson I, Chen S, Stanford C, Zadeh H, Palmer R. Implants of 6 mm vs. 11 mm lengths in the posterior maxilla and mandible: A 1-year multicenter randomized controlled trial. Clin Oral Implants Res. 2013;24:1325-31.
https://doi.org/10.1111/clr.12001
PMid:22938573

 

20. Emre Mumcu and Tugce Kartal. Effects of Implant/Crown Ratio on Crestal Bone Loss: A Review. Acta Scientific Dental Sciences. 2018;2:89-96

 

21. Y. Akagawa, Y. Sato, E. R. Teixeira, N. Shindoi & M. Wadamoto. A mimic osseointegrated implant model for three-dimensional finite element analysis. Journal of Oral Rehabilitation. 2003;30; 41-5.
https://doi.org/10.1046/j.1365-2842.2003.01002.x
PMid:12485382

 

22. Block MS, Kent JN. Clinical update on hydroxylapatite coated implants: Eight-year observations. J Oral Maxillofac Surg. 1994;52:937-43.
https://doi.org/10.1016/S0278-2391(10)80074-6