Shafiei F, Aghaei T, Jowkar Z. Effect of proanthocyanidin mediated immediate and delayed dentin sealing on the strength of premolars restored with composite resin inlay. J Clin Exp Dent. 2020;12(3):e235-41.

 

doi:10.4317/jced.55942

https://doi.org/10.4317/jced.55942

___________________________________________________

 

References

1. Spitznagel FA, Horvath SD, Guess PC, Blatz MB. Resin bond to indirect composite and new ceramic/polymer materials: a review of the literature. J Esthet Dent. 2014;26:382-93.
https://doi.org/10.1111/jerd.12100
PMid:24754327

 

2. Radovic I, Monticelli F, Goracci C, Vulicevic ZR, Ferrari M. Self-adhesive resin cements: a literature review. J Adhes Dent. 2008;10:251-8.

PMid: 18792695

 

3. Hikita K, Van Meerbeek B, De Munck J, Ikeda T, Van Landuyt K, Maida T, et al. Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater. 2007;23:71-80.
https://doi.org/10.1016/j.dental.2005.12.002
PMid:16426673

 

4. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater. 2004;20:963-71.
https://doi.org/10.1016/j.dental.2004.03.002
PMid:15501325

 

5. Monticelli F, Osorio R, Mazzitelli C, Ferrari M, Toledano M. Limited decalcification/diffusion of self-adhesive cements into dentin. J Dent Res. 2008;87:974-9.
https://doi.org/10.1177/154405910808701012
PMid:18809754

 

6. Kanakuri K, Kawamoto Y, Matsumura H. Influence of temporary cement remnant and surface cleaning method on bond strength to dentin of a composite luting system. J Oral Sci. 2005;47:9-13.
https://doi.org/10.2334/josnusd.47.9
PMid:15881223

 

7. Takimoto M, Ishii R, Iino M, Shimizu Y, Tsujimoto A, Takamizawa T, et al. Influence of temporary cement contamination on the surface free energy and dentine bond strength of self-adhesive cements. J Dent. 2012;40:131-8.
https://doi.org/10.1016/j.jdent.2011.11.012
PMid:22133591

 

8. Pashley EL, Comer RW, Simpson MD, Horner JA, Pashley DH, Caughman WF. Dentin permeability: sealing the dentin in crown preparations. Oper Dent. 1992;17:13-20.

PMid: 1437680

 

9. Duarte Jr S, de Freitas CRB, Saad JRC, Sadan A. The effect of immediate dentin sealing on the marginal adaptation and bond strengths of total-etch and self-etch adhesives. J Prosthet Dent. 2009;102:1-9.
https://doi.org/10.1016/S0022-3913(09)00073-0

PMid: 19573687

 

10. Qanungo A, Aras MA, Chitre V, Mysore A, Amin B, Daswani SR. Immediate dentin sealing for indirect bonded restorations. J Prosthodont Res. 2016;60:240-9.
https://doi.org/10.1016/j.jpor.2016.04.001
PMid:27131858

 

11. Oliveira L, Mota E, Borges G, Burnett Jr L, Spohr A. Influence of immediate dentin sealing techniques on cuspal deflection and fracture resistance of teeth restored with composite resin inlays. Oper Dent. 2014;39:72-80.
https://doi.org/10.2341/12-100-L
PMid:23718211

 

12. Gresnigt MM, Cune MS, de Roos JG, Özcan M. Effect of immediate and delayed dentin sealing on the fracture strength, failure type and Weilbull characteristics of lithiumdisilicate laminate veneers. Dent Mater. 2016;32:e73-e81.
https://doi.org/10.1016/j.dental.2016.01.001
PMid:26856454

 

13. Epasinghe D, Yiu C, Burrow M, Tsoi J, Tay F. Effect of flavonoids on the mechanical properties of demineralised dentine. J Dent. 2014;42:1178-84.
https://doi.org/10.1016/j.jdent.2014.07.002
PMid:25010542

 

14. Bedran-Russo AK, Pauli GF, Chen S-N, McAlpine J, Castellan CS, Phansalkar RS, et al. Dentin biomodification: strategies, renewable resources and clinical applications. Dent Mater. 2014;30:62-76.
https://doi.org/10.1016/j.dental.2013.10.012
PMid:24309436 PMCid:PMC3972923

 

15. Balalaie A, Rezvani MB, BASIR MM. Dual function of proanthocyanidins as both MMP inhibitor and crosslinker in dentin biomodification: A literature review. Dent Mater J. 2018;37:173-82.
https://doi.org/10.4012/dmj.2017-062
PMid:29176304

 

16. Barcellos DC, Batista GR, Silva M, Rangel PM, Torres C, Fava M. Evaluation of bond strength of self-adhesive cements to dentin with or without application of adhesive systems. J Adhes Dent. 2011;13:261-5.

PMid: 21734960

 

17. Shafiei F, Doozandeh M, Ghaffaripour D. Effect of Different Liners on Fracture Resistance of Premolars Restored with Conventional and Short Fiber-Reinforced Composite Resins. J Prosthodont. 2019;28:e304-e9.
https://doi.org/10.1111/jopr.12743
PMid:29323779

 

18. Kalay TS, Yildirim T, Ulker M. Effects of different cusp coverage restorations on the fracture resistance of endodontically treated maxillary premolars. J Prosthet Dent. 2016;116:404-10.
https://doi.org/10.1016/j.prosdent.2016.02.007
PMid:27086106

 

19. Sailer I, Oendra AEH, Stawarczyk B, Hämmerle CH. The effects of desensitizing resin, resin sealing, and provisional cement on the bond strength of dentin luted with self-adhesive and conventional resincements. J Prosthet Dent. 2012;107:252-60.
https://doi.org/10.1016/S0022-3913(12)60070-5

PMid: 22475468

 

20. Hironaka NG, Ubaldini AL, Sato F, Giannini M, Terada RS, Pascotto RC. Influence of immediate dentin sealing and interim cementation on the adhesion of indirect restorations with dual-polymerizing resin cement. J Prosthet Dent. 2018;119:678. e1-. e8.
https://doi.org/10.1016/j.prosdent.2018.02.001
PMid:29678248

 

21. Brigagão VC, Barreto LF, Gonçalves KA, Amaral M, Vitti RP, Neves AC, et al. Effect of interim cement application on bond strength between resin cements and dentin: Immediate and delayed dentin sealing. J Prosthet Dent. 2017;117:792-8.
https://doi.org/10.1016/j.prosdent.2016.09.015
PMid:27847158

 

22. Srinivasulu S, Vidhya S, Sujatha M, Mahalaxmi S. Shear bond strength of composite to deep dentin after treatment with two different collagen cross-linking agents at varying time intervals. Oper Dent. 2012;37:485-91.
https://doi.org/10.2341/11-232-L
PMid:22360366

 

23. Al-Ammar A, Drummond JL, Bedran-Russo AK. The use of collagen cross-linking agents to enhance dentin bond strength. J Biomed Mater Res B Appl Biomater. 2009;91:419-24.
https://doi.org/10.1002/jbm.b.31417
PMid:19507140 PMCid:PMC2771399

 

24. Saikaew P, Chowdhury AA, Fukuyama M, Kakuda S, Carvalho RM, Sano H. The effect of dentine surface preparation and reduced application time of adhesive on bonding strength. J Dent. 2016;47:63-70.
https://doi.org/10.1016/j.jdent.2016.02.001
PMid:26855030

 

25. Turco G, Frassetto A, Fontanive L, Mazzoni A, Cadenaro M, Di Lenarda R, et al. Occlusal loading and cross-linking effects on dentin collagen degradation in physiological conditions. Dent Mater. 2016;32:192-9.
https://doi.org/10.1016/j.dental.2015.11.026
PMid:26743966

 

26. Hass V, Luque-Martinez IV, Gutierrez MF, Moreira CG, Gotti VB, Feitosa VP, et al. Collagen cross-linkers on dentin bonding: stability of the adhesive interfaces, degree of conversion of the adhesive, cytotoxicity and in situ MMP inhibition. Dent Mater. 2016;32:732-41.
https://doi.org/10.1016/j.dental.2016.03.008
PMid:27087688

 

27. Ferreira-Filho R, Ely C, Amaral R, Rodrigues J, Roulet J, Cassoni A, et al. Effect of Different Adhesive Systems Used for Immediate Dentin Sealing on Bond Strength of a Self-Adhesive Resin Cement to Dentin. Oper Dent. 2018;43:391-7.
https://doi.org/10.2341/17-023-L
PMid:29630484

 

28. Alex G. Universal adhesives: the next evolution in adhesive dentistry. Compend Contin Educ Dent. 2015;36:15-26.

PMid: 25822403

 

29. Liu R, Fang M, Xiao Y, Li F, Yu L, Zhao S, et al. The effect of transient proanthocyanidins preconditioning on the cross-linking and mechanical properties of demineralized dentin. J Mater Sci Mater Med. 2011;22:2403-11.
https://doi.org/10.1007/s10856-011-4430-4
PMid:21979164

 

30. Liu Y, Chen M, Yao X, Xu C, Zhang Y, Wang Y. Enhancement in dentin collagen's biological stability after proanthocyanidins treatment in clinically relevant time periods. Dent Mater. 2013;29:485-92.
https://doi.org/10.1016/j.dental.2013.01.013
PMid:23434233 PMCid:PMC3640802

 

31. Fang M, Liu R, Xiao Y, Li F, Wang D, Hou R, et al. Biomodification to dentin by a natural crosslinker improved the resin-dentin bonds. J Dent. 2012;40:458-66.
https://doi.org/10.1016/j.jdent.2012.02.008
PMid:22366684