Ferraz CC, Barros RM,
Ferraz FC, Mundstock AA, Maior BS. Analysis of stress distribution in ceramic
and titanium implants in alveolar sockets of the anterior region of the
maxilla. J Clin Exp Dent. 2019;11(10):e850-7.
doi:10.4317/jced.55945
https://doi.org/10.4317/jced.55945
____________________________________________________________________________________________________________________________________________________________________
References
|
1. Bränemark PI, Breine U, Adell
R, Hansson O, Lindström J, Ohlsson Ä. Intra- osseous anchorage of dental
prostheses. I. Experimental studies. Scand J Plast Reconstr Surg Hand Surg.
1969;3:81-100. |
|
|
|
|
|
2. Misch CE. Implant design
considerations for the posterior regions of the mouth. Implant
Dent.1999;8:376-86. |
|
|
|
|
|
3. Hochscheidt CJ, Shimizu R,
Andrighetto AR, Leme P, Salgado CV, Volz KU. Implantes cerâmicos-evidências
científicas para o seu uso. Full Dent Sci. 2014;5:535-45. |
|
|
|
|
|
4. Rosentritt M, Hagemann A,
Hahnel S, Behr M, Press V. In vitro performance of zirconia and titanium
implant/abutment systems for anterior application. J Dent. 2014;42:1019-26. |
|
|
|
|
|
5. Gehrke SA, Poncio da Silva PM,
Guirado JLC, Delgado-Ruiz RA, Dedavid BA, Nagasawa MA, et al. Mechanical
behavior of zirconia and titanium abutments before and after cyclic load
application. J Prosthet Dent. 2016;16:529-35. |
|
|
|
|
|
6. Linkevicius T. The novel design
of zirconium oxide-based screw- retained restorations, maximizing exposure of
zirconia to soft peri-implant tissue: Clinical report after 3 years of
follow-up. Int J Perio Res Dent. 2017;37:41-7. |
|
|
|
|
|
7. Noumbissi S. Ceramic dental
implants: an alternative to titanium and titanium alloys. Arch CraniOrofac
Sc. 2013;1:3739. |
|
|
|
|
|
8. Saab XE, Griggs JA, Powers JM,
Engelmeier RL. Effect of abutment angulation on the strain on the bone around
an implant in the anterior maxilla: a finite element study. J Prosthet Dent.
2007;97:85-92. |
|
|
|
|
|
9. Özkurt Z, Kazazoğlu E. Zirconia
dental implants: a literature review. J Oral Implantol. 2011;37:367-76. |
|
|
|
|
|
10. Koolstra JH, van Eijden TMGJ.
Application and validation of a three dimensional mathematical model of the
human masticatory system in vivo. J Biomech. 1992;25:175-87. PMID:1733993 |
|
|
|
|
|
11. Al-Sabbagh M, Kutkut A.
Immediate implant placement: surgical techniques for prevention and
management of complications. Dent Clin North Am. 2015;59:73-95. |
|
|
|
|
|
12. Kamperos G, Zambara I,
Petsinis V, Zambaras D. The impact of buccal bone defects and immediate
placement on the esthetic outcome of maxillary anterior single -tooth
implants. J Oral Implantol. 2016;42:337-41. |
|
|
|
|
|
13. Blanco J, Carral C, Argibay O,
Liñares A. Implant placement in fresh extraction sockets. Periodontol 2000.
2019;79:151-67. |
|
|
|
|
|
14. Kong L, Hu K, Li D, Song Y,
Yng J, Wu Z, et al. Evaluation of the cylinder implant thread height and
width: A 3-dimensional finite element analysis. Int J Oral Maxillofac
Implants. 2008;23:65-74. PMid:18416414 |
|
|
|
|
|
15. Lin C, Wang J, Ramp L, Liu P.
Biomechanical response of implant systems placed in the maxillary posterior
region under various conditions of angulations, bone density, and loading.
Int J Oral Maxillofac Implants. 2008;23:57-64. PMid:18416413 |
|
|
|
|
|
16. AL-Azrag KE. Influence of
implant abutment angulations on fracture resistance and stress analysis of
different all-ceramic restoration. Mansoura, Egypt: University of Mansoura;
2015. |
|
|
|
|
|
17. Kanbara T, Yajima Y, Yoshinari
M. Wear behavior of tetragonal zirconia polycrystal versus titanium and
titanium alloy. Biomed Mater. 2011;6:021001. |
|
|
|
|
|
18. Natali NA, Pavan PG, Ruggero
AL. Analysis of bone-implant interaction phenomena by using a numerical
approach. Clin Oral Implants Res. 2006;17:67-74. |
|
|
|
|
|
19. Almeida EO. Prótese protocolo
com barra pré-fabricada. Comportamento ósseo variando o tipo de osso e a
configuração horizontal do arco mandibular no MEF-3D. Araçatuba, Brazil:
Faculdade de Odontologia da Universidade Estadual Paulista; 2008. |
|
|
|
|
|
20. Aradya A, Kumar UK, Chowdhary
R. Influence of different abutment diameter of implants on the peri-implant
stress in the crestal bone: A Three-dimensional finite element analysis - In
vitro study. Indian J Dent Res. 2016;27:78-85. |
|
|
|
|
|
21. Leon J, Carrascosa A,
Rodriguez X, Ruiz-Magaz V, Pascual A, Nart J. Finite element analysis
relative to the crestal position of a 3.0-mm-diameter implant. Int J
Periodontics Restorative Dent. 2014;34:381-7. PMid:24804289 |
|
|
|
|
|
22. Lewinstein I, Banks-Sills L,
Eliasi R. Finite element analysis of a new system (IL) for supporting an
implant-retained cantilever prosthesis. Int J Oral Maxillofac Implants. 1995;10:355-66. PMid:7615332 |
|
|
|
|
|
23. Holmes D, Loftus J. Influence
of bone quality on stress distribution for end osseous implants. J Oral
Implantol. 1997;23:104-11. PMid:9477847 |
|
|
|
|
|
24. Sahin S, Cehreli MC, Yaçin E.
The influence of functional forces on the biomechanics of implant-supported
prostheses-a review. J Dent. 2002;30:271-82. PMid:12554107 |
|
|
|
|
|
25. Kitamura E, Stegaroiu R,
Nomura S, Miyakawa O. Influence of marginal bone resorption on stress around
an implant- a three-dimensional finite element analysis. J Oral Rehab.
2005;32:279-86. |
|
|
|
|
|
26. Chun HJ, Shin HS, Han CH, Lee
SH. Influence of implant abutment type on stress distribution in bone under
various loading conditions using finite element analysis. Int J Oral Maxillofac
Implants 2006;21:195-202. PMid:16634489 |
|
|
|
|
|
27. Watanabe F, Hata Y, Komatsu S,
Ramos TC, Fukuda H. Finite element analysis of the influence of implant
inclination, loading position, and load direction on stress distribution.
Odontology. 2003;91:31-6. |
|
|
|
|
|
28. Preis V, Kammermeier A, Handel
G, Rosentritt M. In vitro performance of two-piece zirconia implant systems
for anterior application. Dent Mater. 2016;32:765-74. |
|
|
|
|
|
29. Bayraktar HH, Morgan EF,
Niebur GL, Morris GE, Wong EK, Keaveny TM. Comparison of the elastic and
yield properties of human femoral trabecular and cortical bone tissue. J
Biomech. 2004;37:27-35. PMid:14672565 |
|
|
|
|
|
30. Çaglar A, Bal BT, Karakoca S,
Aydin C, Yilmaz H, Sarisoy S. Three-dimimensional finite element analysis of
titanium and yttrium-stabilized zirconium dioxide abutments and implants. Int
J Oral Maxillofac Implants. 2011;26:961-9. PMid:22010077 |
|
|
|
|
|
31. Pellizzer EP, Carli RI,
Falcon-Antenucci RM, Verri FR, Goiato MC, Villa LM. Photoelastic analysis of
stress distribution with different implant systems. J Oral Implantol.
2014;40:117-22. |
|
|
|
|
|
32. Maeda Y, Miura J, Taki I, Sogo
M. Biomechanical analysis on platform switching: is there any biomechanical
rationale? Clin Oral Implants Res. 2007;18:581-4. |
|
|
|
|
|
33. Carvalho MA, Sotto-Maior BS,
Del Bel Cury AA, Henriques GEP. Effect of platform connection and abutment
material on stress distribution in single anterior implant-supported
restorations: A nonlinear 3-dimensional finite element analysis. J Prosthet
Dent. 2014;112:1096-1102. |
|
|
|
|
|
34. Grassi FR, Capogreco M,
Consonni D, Bilardi G, Bu J, Kalema Z. Immediate occlusal loading of one
-piece zirconia implants: five -year radiographic and clinical evaluation.
Int J Oral Maxillofac Implants. 2015;30:671-80. |
|
|
|
|
|
35. Buser D, Martin W, Belser UC.
Optimizing esthetics for implant restorations in the anterior maxilla:
anatomic and surgical considerations. Int J Oral Maxillofac Implants.
2004;19:43-61. PMid:15635945 |
|