Joukhadar C, Osman E, Rayyan M, Shrebaty M. Comparison between different
surface treatment methods on shear bond strength of zirconia (in vitro study). J Clin Exp
Dent. 2020;12(3):e264-70.
doi:10.4317/jced.56242
https://doi.org/10.4317/jced.56242
______________________________________________________
References
|
1.
Zhang SF, Kocjan A, Lehmann F, Kosmač T, Kern M. Influence of contamination
on resin bond strength to nano-structured alumina-coated zirconia ceramic:
Bond to nano-structured coated zirconia. European Journal of Oral Sciences.
2010;118:396-403. |
|
|
|
|
|
2.
Wandscher VF, Prochnow C, Rippe MP, Dorneles LS, Callegari GL, Baldissara P,
et al. Retentive Strength of Y-TZP Crowns: Comparison of Different Silica
Coating Methods on the Intaglio Surfaces. Operative Dentistry. 2017;42:E121-E133. |
|
|
|
|
|
3.
In Suh B, Chen L, Brown DJ. Bonding in Zirconia: Innovation in adhesion.
AEGIS Dental Network. 2010;31. |
|
|
|
|
|
4.
Yang B, Lange-Jansen HC, Scharnberg M, Wolfart S, Ludwig K, Adelung R, et al.
Influence of saliva contamination on zirconia ceramic bonding. Dental
Materials: Official Publication of the Academy of Dental Materials. 2008;24:508-13. |
|
|
|
|
|
5.
Foxton RM, Cavalcanti AN, Nakajima M, Pilecki P, Sherriff M, Melo L. Durability
of Resin Cement Bond to Aluminium Oxide and Zirconia Ceramics after Air
Abrasion and Laser Treatment. Journal of Prosthodontics. 2011;20:84-92. |
|
|
|
|
|
6.
Van Schalkwyk JH, Botha FS, van der Vyver PJ, de Wet FA, Botha SJ. Effect of
biological contamination on dentine bond strength of adhesive resins. Journal
of the South African Dental Association. 2003;58:143-7. |
|
|
|
|
|
7.
Yang B, Scharnberg M, Wolfart S, Quaas AC, Ludwig K, Adelung R, et al.
Influence of contamination on bonding to zirconia ceramic. Journal of
Biomedical Materials Research Part B: Applied Biomaterials. 2007;81B:283-290. |
|
|
|
|
|
8.
Angkasith P, Burgess JO, Bottino MC, Lawson NC. Cleaning Methods for Zirconia
Following Salivary Contamination: Cleaning Methods for Zirconia. Journal of
Prosthodontics. 2016;25:375-9. |
|
|
|
|
|
9.
Aboushelib MN, Mirmohamadi H, Matinlinna JP, Kukk E, Ounsi HF, Salameh Z.
Innovations in bonding to zirconia-based materials. Part II: Focusing on
chemical interactions. Dental Materials. 2009;25:989-93. |
|
|
|
|
|
10.
Inokoshi M, De Munck J, Minakuchi S, Van Meerbeek B. Meta-analysis of bonding
effectiveness to zirconia ceramics. Journal of Dental Research. 2014;93:329-34. |
|
|
|
|
|
11.
Mariano NA, Oliveira RG, Fernandes MA, Rigo ECS. Corrosion behavior of pure
titanium in artificial saliva solution. Matéria (Rio de Janeiro).
2009;14:878-80. |
|
|
|
|
|
12.
Subaşı MG, İnan Ö. Evaluation of the topographical surface changes and
roughness of zirconia after different surface treatments. Lasers in Medical
Science. 2012;27:735-42. |
|
|
|
|
|
13.
Cavalcanti AN, Foxton RM, Watson TF, Oliveira MT, Giannini M, Marchi GM. Bond
Strength of Resin Cements to a Zirconia Ceramic with Different Surface Treatments.
Operative Dentistry. 2009;34:280-7. |
|
|
|
|
|
14.
Akyil MS, Uzun IH, Bayindir F. Bond strength of resin cement to yttrium
stabilized tetragonal zirconia ceramic treated with air abrasion, silica
coating, and laser irradiation. Photomedicine and Laser Surgery. 2010;28:801-8. |
|
|
|
|
|
15.
Arami S, Tabatabae MH, Namdar SF, Chiniforush N. Effects of different lasers
and particle abrasion on surface characteristics of zirconia ceramics.
Journal of Dentistry (Tehran, Iran). 2014;11:233-41. PMid:
24910700 PMCid: PMC4043556 |
|
|
|
|
|
16.
Özcan M, Melo RM, Souza ROA, Machado JPB, Felipe Valandro L, Botttino MA.
Effect of air-particle abrasion protocols on the biaxial flexural strength,
surface characteristics and phase transformation of zirconia after cyclic
loading. Journal of the Mechanical Behavior of Biomedical Materials. 2013;20:19-28. |
|
|
|
|
|
17.
Skienhe H, Habchi R, Ounsi H, Ferrari M, Salameh Z. Evaluation of Effect of
Different Types of Abrasive Surface Treatment before and after Zirconia
Sintering on Its Structural Composition and Bond Strength with Resin Cement.
BioMed Research International. 2018;2018:1803425. |
|
|
|
|
|
18.
Hallmann L, Ulmer P, Reusser E, Hämmerle CHF. Surface characterization of
dental Y-TZP ceramic after air abrasion treatment. Journal of Dentistry.
2012;40:723-35. |
|
|
|
|
|
19.
Çağlar İ, Yanıkoğlu N. The Effect of Sandblasting, Er:YAG Laser, and Heat
Treatment on the Mechanical Properties of Different Zirconia Cores.
Photomedicine and Laser Surgery. 2016;34:17-26. |
|
|
|
|
|
20.
Turp V, Akgungor G, Sen D, Tuncelli B. Evaluation of Surface Topography of
Zirconia Ceramic After Er:YAG Laser Etching. Photomedicine and Laser Surgery.
2014;32:533-9. |
|
|
|
|
|
21.
Akın H, Ozkurt Z, Kırmalı O, Kazazoglu E, Ozdemir AK. Shear Bond Strength of
Resin Cement to Zirconia Ceramic After Aluminum Oxide Sandblasting and
Various Laser Treatments. Photomedicine and Laser Surgery. 2011;29:797-802. |
|
|
|
|
|
22.
Dede DÖ, Yenisey M, Rona N, Öngöz Dede F. Effects of Laser Treatment on the
Bond Strength of Differently Sintered Zirconia Ceramics. Photomedicine and
Laser Surgery. 2016;34:276-83. |
|
|
|
|
|
23.
Gargari M, Gloria F, Napoli E, Pujia A. Zirconia: cementation of prosthetic
restorations. Literature review. Oral & Implantology. 2010;3:25-9. PMid:
23285393 PMCid: PMC3399176 |
|
|
|
|
|
24.
Attia A, Kern M. Long-term resin bonding to zirconia ceramic with a new
universal primer. The Journal of Prosthetic Dentistry. 2011;106:319-27. PMid:
22024182 |
|
|
|
|
|
25.
Krifka S, Preis V, Rosentritt M. Effect of Decontamination and Cleaning on
the Shear Bond Strength of High Translucency Zirconia. Dentistry Journal.
2017;5:32. |
|
|
|
|
|
26.
Nagaoka N, Yoshihara K, Feitosa VP, Tamada Y, Irie M, Yoshida Y, et al.
Chemical interaction mechanism of 10-MDP with zirconia. 2017;7:45563. |
|
|
|
|
|
27.
Aladağ A, Elter B, Çömlekoğlu E, Kanat B, Sonugelen M, Kesercioğlu A, et al.
Effect of different cleaning regimens on the adhesion of resin to
saliva-contaminated ceramics. Journal of Prosthodontics: Official Journal of
the American College of Prosthodontists. 2015;24:136-45. |
|
|
|
|
|
28.
Yoshida K. Influence of cleaning methods on resin bonding to
saliva-contaminated zirconia. Journal of Esthetic and Restorative Dentistry.
2018;30:259-64. |
|
|
|
|
|
29.
Chintapalli RK, Marro FG, Jimenez-Pique E, Anglada M. Phase transformation
and subsurface damage in 3Y-TZP after sandblasting. Dental Materials:
Official Publication of the Academy of Dental Materials. 2013;29:566-72. |
|