Ayash G, Osman E, Segaan L, Rayyan M, Joukhadar C. Influence of resin cement shade on the color and translucency of zirconia crowns. J Clin Exp Dent. 2020;12(3):e257-63.







1. Tung FF, Goldstein GR, Jang S, Hittelman E. The repeatability of an intraoral dental colorimeter. J Prosthet Dent. 2002;88:585-90.


2. Marquardt P, Strub JR. Survival rates of IPS empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study. Quintessence Int Berl Ger 1985. 2006;37:253-9.

PMid: 16594356


3. Yoshida A, Miller L, Da Silva JD, Ishikawa-Nagai S. Spectrophotometric Analysis of Tooth Color Reproduction on Anterior All-Ceramic Crowns: Part 2: Color Reproduction and Its Transfer from In Vitro to In Vivo. J Esthet Restor Dent. 2010;22:53-63.


4. Vafaee F, Heidari B, Khoshhal M, Hooshyarfard A, Izadi M, Shahbazi A, et al. Effect of Resin Cement Color on the Final Color of Lithium Disilicate All-Ceramic Restorations. J Dent Tehran Iran. 2018;15:143-50.

PMid: 30090114 PMCid: PMC6079184


5. Alqahtani MQ, Aljurais RM, Alshaafi MM. The effects of different shades of resin luting cement on the color of ceramic veneers. Dent Mater J. 2012;31:354-61.


6. Johnston WM, Ma T, Kienle BH. Translucency parameter of colorants for maxillofacial prostheses. Int J Prosthodont. 1995;8:79-86.

PMid: 7710631


7. Paul SJ, Peter A, Rodoni L, Pietrobon N. Conventional visual vs spectrophotometric shade taking for porcelain-fused-to-metal crowns: a clinical comparison. Int J Periodontics Restorative Dent. 2004;24:222-31.

PMid: 15227770


8. Khurana R, Tredwin CJ, Weisbloom M, Moles DR. A clinical evaluation of the individual repeatability of three commercially available colour measuring devices. Br Dent J. 2007;203:675-80.


9. Karamouzos A, Papadopoulos MA, Kolokithas G, Athanasiou AE. Precision of in vivo spectrophotometric colour evaluation of natural teeth. J Oral Rehabil. 2007;34:613-21.


10. Boening KW, Kaestner KI, Luthardt RG, Walter MH. Burs with guide pins for standardized tooth preparation. Quintessence Int Berl Ger 1985. 2001;32:191-7.

PMid: 12066658


11. Ashri NY, AlRifaiy MQ, El Metwally A. The Effect of Gingival Retraction Cord on Periodontal Health Compared to Other Gingival Retraction Procedures: A Systematic Review. Periodontics Prosthodont. 2016;3.


12. Liu M-C, Aquilino SA, Lund PS, Vargas MA, Diaz-Arnold AM, Gratton DG, et al. Human Perception of Dental Porcelain Translucency Correlated to Spectrophotometric Measurements. J Prosthodont. 2010;19:187-93.


13. Herrguth M, Wichmann M, Reich S. The aesthetics of all-ceramic veneered and monolithic CAD/CAM crowns. J Oral Rehabil. 2005;32:747-52.


14. Nakamura K, Kanno T, Milleding P, Ortengren U. Zirconia as a dental implant abutment material: a systematic review. Int J Prosthodont. 2010;23:299-309.

PMid: 20617217


15. Paniz G, Kang KH, Kim Y, Kumagai N, Hirayama H. Influence of coping design on the cervical color of ceramic crowns. J Prosthet Dent. 2013;110:494-500.


16. Shokry TE, Shen C, Elhosary MM, Elkhodary AM. Effect of core and veneer thicknesses on the color parameters of two all-ceramic systems. J Prosthet Dent. 2006;95:124-9.


17. Judeh A, Al-Wahadni A. A comparison between conventional visual and spectrophotometric methods for shade selection. Quintessence Int Berl Ger 1985. 2009;40:e69-79.

PMid: 19862392


18. Burke FJT, Fleming GJP, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent. 2002;4:7-22.

PMid: 12071631


19. Attia A. Bond strength of three luting agents to zirconia ceramic - influence of surface treatment and thermocycling. J Appl Oral Sci Rev FOB. 2011;19:388-95.
PMid:21710091 PMCid:PMC4223792


20. Seghi RR, Johnston WM, O'Brien WJ. Spectrophotometric analysis of color differences between porcelain systems. J Prosthet Dent. 1986;56:35-40.

PMid: 3459879


21. Tuncel İ, Turp I, Üşümez A. Evaluation of translucency of monolithic zirconia and framework zirconia materials. J Adv Prosthodont. 2016;8:181.
PMid:27350851 PMCid:PMC4919487


22. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent. 2002;88:10-5.


23. Baldissara P, Llukacej A, Ciocca L, Valandro FL, Scotti R. Translucency of zirconia copings made with different CAD/CAM systems. J Prosthet Dent. 2010;104:6-12.

PMid: 3459879


24. Volpato C, Monteirojr S, Deandrada M, Fredel M, Petter C. Optical influence of the type of illuminant, substrates and thickness of ceramic materials. Dent Mater. 2009;25:87-93.


25. Luo XP, Zhang L. Effect of Veneering Techniques on Color and Translucency of Y-TZP: Color and Translucency of Y-TZP Ceramic Restorations. J Prosthodont. 2010;19:465-70.


26. Fazi G, Vichi, A, Ferrari, M. Influence of four different cements on the color of zirconia structures of varying ceramic thickness. Int Dent SA. 2006;8:54-61.


27. Azer SS, Ayash GM, Johnston WM, Khalil MF, Rosenstiel SF. Effect of esthetic core shades on the final color of IPS Empress all-ceramic crowns. J Prosthet Dent. 2006;96:397-401.


28. Vichi A, Ferrari M, Davidson CL. Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent. 2000;83:412-7.

PMid: 10756290


29. Cubas GB de A, Camacho GB, Fontes ST, Pereira-Cenci T. The effect of repeated firings on the color of feldspathic ceramics. Gen Dent. 2011;59:e116-120.

PMid: 21903532


30. Dozić A, Kleverlaan CJ, Meegdes M, van der Zel J, Feilzer AJ. The influence of porcelain layer thickness on the final shade of ceramic restorations. J Prosthet Dent. 2003;90:563-70.

PMid: 14668757