Oteiza-Galdón
B, Martínez-González A, Escuder AV. Analysis of fit on implants of chrome
cobalt versus titanium frameworks made by cad / cam milling. J Clin Exp Dent.
2020;12(10):e951-7.
doi:10.4317/jced.57817
https://doi.org/10.4317/jced.57817
______________________
References
|
1.
Branemark PI. Osseointegration and its experimental background. J Prosthet
Dent. 1983;50:399-410. PMid:6352924 |
|
|
|
|
|
2.
Klineberg I, Murray G. Design of superstructures for osseointegrated
fixtures. Swed Dent J. 1985;28:63-9. PMid:3904064 |
|
|
|
|
|
3.
Jemt T. Failures and complications in 391 consecutively inserted fixed
prostheses supported by Brånemark implants in edentulous jaws. A study of
treatment from the time of prosthesis placement to the first annual check-up.
Int J Oral Maxillofac Implants. 1991;6:270-6. PMid:1813395 |
|
|
|
|
|
4.
Watanabe F, Uno I, Hata Y, Neuendorff G, Kirsch A. Analysis of stress
distribution in a screw-retained implant prosthesis. Int J Oral Maxillofac
Implants. 2000;15:209-18. PMid:10795453 |
|
|
|
|
|
5.
Sahin S, Cehreli M. The significance of passive fit in implant prosthodontics:
Current status. Implant Dent. 2001;10:85-92. |
|
|
|
|
|
6.
Taylor TD, Agar JR, Vogiatzi T. Implant prosthodontics: current perspective
and future directions. Int J Oral Maxillofac Implants. 2000;15:66-75. PMid:10697941 |
|
|
|
|
|
7.
Barbosa G, Simamoto P, Fernandes A, Mattos M, Neves F. Prosthetic laboratory
influence on the vertical misfit at the implant/UCLA abutment interface. Braz
Dent J. 2007;18:139-43. |
|
|
|
|
|
8.
Abduo J, Lyons K, Bennamoun M. Trends in Computer-Aided Manufacturing in
Prosthodontics: A Review of the Available Streams International. J Dent.
2014;2014:783948. |
|
|
|
|
|
9.
De Torres EM, Silveira RC, Chiarello MG, Ribeiro RF. The effect of
commercially pure titanium and alternative dental alloys on the marginal fit
of one-piece cast implant frameworks. J Dent. 2007;35:800-5. |
|
|
|
|
|
10.
De Torres EM, Seabra GA, Rocha S, Chiarello MG, Ribeiro RF. Correlation
between vertical misfits and stresses transmitted to implants from metal
frameworks. J Biomech. 2011;44:1735-9. |
|
|
|
|
|
11.
Kano SC, Bonfante G, Hussne R, Siqueira AF. Use of base metal casting alloys
for implant framework: marginal accuracy analysis. J Appl Oral Sci. 2004;12:337-43. |
|
|
|
|
|
12.
Moraes LMC, Rossetti PHO, Rossetti LMN, Pedreira APRV, Valle AL, Bonachela
WC. Marginal fit at cylinder-abutment interface before and after overcastting
procedure. J Appl Oral Sci. 2005;13:366-71. |
|
|
|
|
|
13.
Abduo J, Lyons K. Rationale for the use of CAD/CAM technology in implant
prosthodontics. International J Dent. 2013;2013:768121. |
|
|
|
|
|
14.
de França DGB, Morais MHST, das Neves FD, Barbosa GAS. Influence of CAD/CAM
on the fit accuracy of implant-supported zirconia and cobalt-chromium fixed
dental prostheses. J Prosthet Dent. 2015;113:22-8. |
|
|
|
|
|
15.
Araújo GM, de Franca DGB, Neto JPS, Barbosa GAS. Passivity of conventional
and CAD/CAM fabricated implant frameworks. Braz Dent J. 2015;26:277-83. |
|
|
|
|
|
16.
Presotto AGC, Bhering CLB, Mesquita MF, Barao VAR. Marginal fit and
photoelastic stress analysis of CAD-CAM and overcast 3-unit implant-supported
frameworks. J Prosthet Dent. 2017;117:373-9. |
|
|
|
|
|
17.
Svanborg P, Stenport V, Eliasson A. Fit of cobalt-chromium implant frameworks
before and after ceramic veneering in comparison with CNC-milled titanium
frameworks. Clin Exp Dent Res. 2015;1:49-56. |
|
|
|
|
|
18.
Lee EY, Jun SG, Wright RF, Park EJ. Comparative study of three shear bond
strenght of various veneering materials on grade II commercially pure
titanium. J Adv Prosthodont. 2015;7:69-73. |
|
|
|
|
|
19.
Markarian RA, Ueda C, Sendyk CL, Cruz D, Martins R. Stress distribution after
installation of fixed frameworks with marginal gaps over angled and parallel
implants: a photoelastic analysis. J Prosthodont. 2007;16:117-22. |
|
|
|
|
|
20.
Katsoulis J, Mericske-Sten R, Rotkina L, Zbären C, Enkling N, Blatz MB.
Precision of fit of implant-supported screw-retained 10-unit
computer-aided-designed and computer -aided-manufactured frameworks made from
zirconium dioxide and titanium: an in vitro study. Clin Oral Impl Res.
2014;25:165-74. |
|
|
|
|
|
21.
Abduo J, Lyons K, Waddell N, Bernnani V, Swain M. A comparison of fit of CNC
-milled titanium and zirconia frameworks to implants. Clin Implant Dent Relat
Res. 2012;14:20-9. |
|
|
|
|
|
22.
Kim KS, Lim YJ, Kim MJ, Kwon HB, Yang JH, Lee JB, et al. Variation in total
lengths of abutment /implant assemblies generated with a function of applied
tightening torque in external and internal implant-abutment connection. Clin
Oral Impl Res. 2011;22:834-9. |
|
|
|
|
|
23.
Jemt T, Lekholm U. Measurements of bone and framework deformations induced by
misfit of implant superstructures: a pilot study in rabbits. Clin Oral
Implants Res. 1998;9:272-80. |
|
|
|
|
|
24.
Ichim I, Swain MV, Kieser JA. Mandibular stiffness in humans: Numerical
predictions. J Biomech. 2006;39:1903-13. |
|
|
|
|
|
25.
Abduo J, Lyons K. Effect of vertical misfit on strain within screw-retained
implant titanium and zirconia frameworks. J Prosthodont Rest . 2012;56:102-9. |
|
|
|
|
|
26.
Teigen K, Jokstad A. Dental implant suprastructures using cobalt-chromium
alloy compared with gold alloy framework veneered with ceramic or acrylic
resina retrospective cohort study up to 18 years. Clin Oral Impl Res.
2012;23:853-60. |
|