Mondelli RFL, Garrido LMA, Soares AF, Rodriguez-Medina AD, Mondelli J, de Lucena FS, Furuse AY. Effect of simulated brushing on surface roughness and wear of bis-acryl-based materials submitted to different polishing protocols. J Clin Exp Dent. 2022;14(2):e168-76.

doi:10.4317/jced.58920

___________

References

1. Robinson FB, Hovijitra S. Marginal fit of direct temporary crowns. J Prosthet Dent. 1982;47:390-392. https://doi.org/10.1016/S0022-3913(82)80087-5 PMid:6951039

2. Blasi A, Alnassar T, Chiche G. Injectable technique for direct provisional restoration. J Esthet Restor Dent. 2018;30:85-88. https://doi.org/10.1111/jerd.12333 PMid:28929603

3. Duke ES. Provisional restorative materials: a technology update. Compend Contin Educ Dent. 1999;20:497-500. PMid:10650363

4. Burns DR, Beck DA, Nelson SK. A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics. J Prosthet Dent. 2003;90:474-497. https://doi.org/10.1016/S0022-3913(03)00259-2 PMid:14586312

5. Astudillo-Rubio D, Delgado-Gaete A, Bellot-Arcis C, Montiel-Company JM, Pascual-Moscardo A, Almerich-Silla JM. Mechanical properties of provisional dental materials: A systematic review and meta-analysis. PLoS One. 2018;13:e0193162. https://doi.org/10.1371/journal.pone.0193162 PMid:29489883 PMCid:PMC5830998

6. Schwantz JK, Oliveira-Ogliari A, Meereis CT, Leal FB, Ogliari FA, Moraes RR. Characterization of Bis-Acryl Composite Resins for Provisional Restorations. Braz Dent J. 2017;28:354-361. https://doi.org/10.1590/0103-6440201601418 PMid:29297557

7. Rutkunas V, Sabaliauskas V, Mizutani H. Effects of different food colorants and polishing techniques on color stability of provisional prosthetic materials. Dent Mater J. 2010;29:167-176. https://doi.org/10.4012/dmj.2009-075 PMid:20379027

8. Kumari RV, Nagaraj H, Siddaraju K, Poluri RK. Evaluation of the Effect of Surface Polishing, Oral Beverages and Food Colorants on Color Stability and Surface Roughness of Nanocomposite Resins. J Int Oral Health. 2015;7:63-70. PMid:26229373 PMCid:PMC4513779

9. Köroğlu A, Sahin O, Dede D, Yilmaz B. Effect of different surface treatment methods on the surface roughness and color stability of interim prosthodontic materials. J Prosthet Dent. 2016;115:447-455. https://doi.org/10.1016/j.prosdent.2015.10.005 PMid:26723092

10. Haselton DR, Diaz-Arnold AM, Vargas MA. Flexural strength of provisional crown and fixed partial denture resins. J Prosthet Dent. 2002;87:225-228. https://doi.org/10.1067/mpr.2002.121406 PMid:11854681

11. Kurbad A. Planning and predictability of clinical outcomes in esthetic rehabilitation. Int J Comput Dent. 2015;18:65-84. PMid:25911830

12. Sen D, Goller G, Issever, H. The effect of two polishing pastes on the surface roughness of bis-acryl composite and methacrylate-based resins. J Prosthet Dent. 2002;88:527-532. https://doi.org/10.1067/mpr.2002.129335 PMid:12474004

13. Jefferies SR. Abrasive finishing and polishing in restorative dentistry: a state-of-the-art review. Dent Clin North Am. 2007;51:379-397. https://doi.org/10.1016/j.cden.2006.12.002 PMid:17532918

14. Tupinamba IVM, Giampa PCC, Rocha IAR, Lima E. Effect of different polishing methods on surface roughness of provisional prosthetic materials. J Indian Prosthodont Soc. 2018;18:96-101. https://doi.org/10.4103/jips.jips_258_17 PMid:29692561 PMCid:PMC5903186

15. Sathe S, Karva S, Borle A, Dhamande M, Jaiswal T, Nimonkar S. "Comparative Evaluation of the Effect of Three Polishing Agents on Staining Characteristics of Provisional Restorative Material:" An in vitro Study. J Int Soc Prev Community Dent. 2019;9:250-255. https://doi.org/10.4103/jispcd.JISPCD_431_18 PMid:31198697 PMCid:PMC6559038

16. Poonacha V, Poonacha S, Salagundi B, Rupesh PL, Raghavan R. In vitro comparison of flexural strength and elastic modulus of three provisional crown materials used in fixed prosthodontics. J Clin Exp Dent. 2013;5. https://doi.org/10.4317/jced.51136 PMid:24455084 PMCid:PMC3892269

17. Saisadan D, Manimaran P, Meenapriya PK. In vitro comparative evaluation of mechanical properties of temporary restorative materials used in fixed partial denture. J Pharm Bioallied Sci. 2016;8:S105-S109. PMid:27829758 PMCid:PMC5074009

18. Lee J, Clark SR, Tantbirojn D, Korioth TVP, Hill AE, Versluis A. Strength and stiffness of interim materials and interim fixed dental prostheses when tested at different loading rates. J Prosthet Dent. 2022;127:161-167. PMid:33218745

19. Mondelli RF, Wang L, Garcia FC, Prakki A, Mondelli J, Franco EB, Ishikiriama A. Evaluation of weight loss and surface roughness of compomers after simulated toothbrushing abrasion test. J Appl Oral Sci. 2005;13:131-135. https://doi.org/10.1590/S1678-77572005000200007 PMid:20924536

20. Oliveira GUd, Mondelli RFL, Charantola Rodrigues M, Franco EB, Ishikiriama SK, Wang L. Impact of filler size and distribution on roughness and wear of composite resin after simulated toothbrushing. Journal of Applied Oral Science. 2012;20:510-516. https://doi.org/10.1590/S1678-77572012000500003 PMid:23138735 PMCid:PMC3881789

21. Prakki A, Ribeiro IW, Cilli R, Mondelli RF. Assessing the tooth-restoration interface wear resistance of two cementation techniques: effect of a surface sealant. Oper Dent. 2005;30:739-746. PMid:16382597

22. Prakki A, Cilli R, Mondelli RF, Kalachandra S. In vitro wear, surface roughness and hardness of propanal-containing and diacetyl-containing novel composites and copolymers based on bis-GMA analogs. Dent Mater. 2008;24:410-417. https://doi.org/10.1016/j.dental.2007.06.011 PMid:17688931

23. Reis AF, Giannini M, Lovadino JR, Ambrosano GM. Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins. Dent Mater. 2003;19:12-18. https://doi.org/10.1016/S0109-5641(02)00014-3 PMid:12498891

24. Glauser S, Astasov-Frauenhoffer M, Müller JA, Fischer J, Waltimo T, Rohr N. Bacterial colonization of resin composite cements: influence of material composition and surface roughness. Eur J Oral Sci. 2017;125:294-302. https://doi.org/10.1111/eos.12355 PMid:28618020

25. Oliveira GU, Mondelli RF, Charantola Rodrigues M, Franco EB, Ishikiriama SK, Wang L. Impact of filler size and distribution on roughness and wear of composite resin after simulated toothbrushing. J Appl Oral Sci. 2012;20:510-516. https://doi.org/10.1590/S1678-77572012000500003 PMid:23138735 PMCid:PMC3881789

26. Tjan AH, Chan CA. The polishability of posterior composites. J Prosthet Dent. 1989;61:138-146. https://doi.org/10.1016/0022-3913(89)90361-2 PMid:2715944

27. Chandler HH, Bowen RL, Paffenbarger GC. Method for finishing composite restorative materials. J Am Dent Assoc. 1971;83:344-348. https://doi.org/10.14219/jada.archive.1971.0311 PMid:5283032

28. Christensen RP, Christensen GJ. Comparison of instruments and commercial pastes used for finishing and polishing composite resin. Gen Dent. 1981;29:40-45. PMid:6948739

29. Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. 1997;13:258-269. https://doi.org/10.1016/S0109-5641(97)80038-3 PMid:11696906

30. da Costa JB, Goncalves F, Ferracane JL. Comparison of two-step versus four-step composite finishing/polishing disc systems: evaluation of a new two-step composite polishing disc system. Oper Dent. 2011;36: 205-212. https://doi.org/10.2341/10-162-L PMid:21702670

31. Watanabe T, Miyazaki M, Takamizawa T, Kurokawa H, Rikuta A, Ando S. Influence of polishing duration on surface roughness of resin composites. J Oral Sci. 2005;47:21-25. https://doi.org/10.2334/josnusd.47.21 PMid:15881225

32. Klapdohr S, Moszner N. New Inorganic Components for Dental Filling Composites. Monatshefte für Chemie / Chemical Monthly. 2005;136:21-45. https://doi.org/10.1007/s00706-004-0254-y

33. Al Khuraif AA. An in vitro evaluation of wear and surface roughness of particulate filler composite resin after tooth brushing. Acta Odontol Scand. 2014;72:977-983. https://doi.org/10.3109/00016357.2014.933251 PMid:25220522

34. Patel B, Chhabra N, Jain D. Effect of different polishing systems on the surface roughness of nano-hybrid composites. J Conserv Dent. 2016;19:37-40. https://doi.org/10.4103/0972-0707.173192 PMid:26957791 PMCid:PMC4760010

35. Marghalani HY. Effect of filler particles on surface roughness of experimental composite series. J Appl Oral Sci. 2010;18:59-67. https://doi.org/10.1590/S1678-77572010000100011 PMid:20379683 PMCid:PMC5349034

36. Moda MD, Godas AGL, Fernandes JC, Suzuki TYU, Guedes APA, Briso ALF, et al. Comparison of different polishing methods on the surface roughness of microhybrid, microfill, and nanofill composite resins. J Investig Clin Dent. 2018;9. https://doi.org/10.1111/jicd.12287 PMid:28762671

37. Arima T, Murata H, Hamada T. The effects of cross-linking agents on the water sorption and solubility characteristics of denture base resin. J Oral Rehabil. 1996;23:476-480. https://doi.org/10.1111/j.1365-2842.1996.tb00882.x PMid:8814563

38. Sexson JC, Phillips RW. Studies on the effects of abrasives on acrylic resins. J Prosthet Dent. 1951;1:454-471. https://doi.org/10.1016/0022-3913(51)90031-5 PMid:14851323

39. Lira AF, Consani RL, Mesquita MF, Nobilo MA, Henriques GE. Effect of toothbrushing, chemical disinfection and thermocycling procedures on the surface microroughness of denture base acrylic resins. Gerodontology. 2012;29:e891-897. https://doi.org/10.1111/j.1741-2358.2011.00582.x PMid:22098117

40. Soderholm KJ, Richards ND. Wear resistance of composites: a solved problem? Gen Dent. 1998;46:256-263; quiz 264-255. PMid:9693539

41. Aydinoglu A, Yoruc ABH. Effects of silane-modified fillers on properties of dental composite resin. Mater Sci Eng C Mater Biol Appl. 2017;79:382-389. https://doi.org/10.1016/j.msec.2017.04.151 PMid:28629032

42. Lim BS, Ferracane JL, Condon JR, Adey JD. Effect of filler fraction and filler surface treatment on wear of microfilled composites. Dent Mater. 2002;18:1-11. https://doi.org/10.1016/S0109-5641(00)00103-2 PMid:11740959