Zotti F, Hu J,
Zangani A, Albanese M, Paganelli C. Fracture strenght and ribbond fibers: In
vitro analysis of mod restorations. J Clin Exp Dent. 2023;15(4):e318-23.
doi:10.4317/jced.60334
https://doi.org/10.4317/jced.60334
__________
References
|
1.
Goel VK, Khera SC, Gurusami S, Chen RC. Effect of cavity depth on stresses in
a restored tooth. J Prosthet Dent. 1992;67:174-83. |
|
|
|
|
|
2.
Reeh ES, Messer HH, Douglas WH. Reduction in tooth stiffness as a result of
endodontic and restorative procedures. J Endod. 1989;15:512-6. |
|
|
|
|
|
3.
Fráter M, Forster A, Keresztúri M, Braunitzer G, Nagy K. In vitro fracture
resistance of molar teeth restored with a short fibre-reinforced composite
material. J Dent. 2014;42:1143-50. |
|
|
|
|
|
4.
Ciavoi G, Mărgărit R, Todor L, Bodnar D, Dina MN, Tărlungeanu DI, et al. Base
Materials' Influence on Fracture Resistance of Molars with MOD Cavities.
Materials (Basel). 2021;14:5242. |
|
|
|
|
|
5.
Mondelli J, Steagall L, Ishikiriama A, de Lima Navarro MF, Soares FB. Fracture
strength of human teeth with cavity preparations. J Prosthet Dent. 1980;43:419-22. |
|
|
|
|
|
6.
Leyton BS, Rached RN, Ignácio SA, Souza EM. Fracture strength of extended
class I composite restorations with different restorative techniques.
Odontology. 2022;110:269-277. |
|
|
|
|
|
7.
Hervás-García A, Martínez-Lozano MA, Cabanes-Vila J, Barjau-Escribano A,
Fos-Galve P. Composite resins. A review of the materials and clinical
indications. Med Oral Patol Oral Cir Bucal. 2006;11:E215-20. PMid:16505805 |
|
|
|
|
|
8.
Tuloglu N, Bayrak S, Tunc ES. Different clinical applications of bondable
reinforcement ribbond in pediatric dentistry. Eur J Dent. 2009;3:329-34. |
|
|
|
|
|
9.
Deliperi S, Alleman D, Rudo D. Stress-reduced Direct Composites for the
Restoration of Structurally Compromised Teeth: Fiber Design According to the
"Wallpapering" Technique. Oper Dent. 2017;42:233-243. |
|
|
|
|
|
10.
Belli S, N Dönmez N, Eskitaşcioğlu G. The effect of c-factor and flowable
resin or fiber use at the interface on microtensile bond strength to dentin.
J Adhes Dent. 2006;8:247-53. PMid:16958290 |
|
|
|
|
|
11.
Jantarat J, Palamara JE, Messer HH. An investigation of cuspal deformation
and delayed recovery after occlusal loading. J Dent. 2001;29:363-70. |
|
|
|
|
|
12.
Re GJ, Norling BK, Draheim RN. Fracture resistance of lower molars with
varying faciocclusolingual amalgam restorations. J Prosthet Dent. 1982;47:518-21. |
|
|
|
|
|
13.
Re GJ, Draheim RN, Norling BK. Fracture resistance of mandibular molars with
occlusal class I amalgam preparations. J Am Dent Assoc. 1981;103:580-3. |
|
|
|
|
|
14.
Re GJ, Norling BK. Fracturing molars with axial forces. J Dent Res. 1981;60:805-8. |
|
|
|
|
|
15.
Xu HH, Smith DT, Jahanmir S, Romberg E, Kelly JR, Thompson VP, et al.
Indentation damage and mechanical properties of human enamel and dentin. J
Dent Res. 1998;77:472-80. |
|
|
|
|
|
16.
Bechtle S, Fett T, Rizzi G, Habelitz S, Klocke A, Schneider GA. Crack arrest
within teeth at the dentinoenamel junction caused by elastic modulus
mismatch. Biomaterials. 2010;31:4238-47. |
|
|
|
|
|
17.
Larson TD, Douglas WH, Geistfeld RE. Effect of prepared cavities on the
strength of teeth. Oper Dent. 1981;6:2-5. PMid:6941225 |
|
|
|
|
|
18.
Watts DC, el Mowafy OM, Grant AA. Fracture resistance of lower molars with
Class 1 composite and amalgam restorations. Dent Mater. 1987;3:261-4. |
|
|
|
|
|
19.
Akman S, Akman M, Eskitascioglu G, Belli S. Influence of several
fibre-reinforced composite restoration techniques on cusp movement and
fracture strength of molar teeth. Int Endod J. 2011;44:407-15. |
|
|
|
|
|
20.
Belli S, Erdemir A, Ozcopur M, Eskitascioglu G. The effect of fibre insertion
on fracture resistance of root filled molar teeth with MOD preparations
restored with composite. Int Endod J. 2005;38:73-80. |
|