Tozo-Burgos JG,
Juárez-Vizcarra CF, Calla-Poma R, Sánchez-Tito M. Fracture Resistance of
CAD/CAM Nanohybrid Resin Occlusal Veneers Based on Bonding Surface: Enamel vs.
Enamel-Dentin vs. Enamel-Resin Coating. J
Clin Exp Dent. 2025;17(6):e675-82.
doi:10.4317/jced.62793
https://doi.org/10.4317/jced.62793
___
References
|
1.
Yamalik N, Nemli SK, Carrilho E, Dianiskova S, Melo P, Lella A, et al.
Implementation of evidence-based dentistry into practice: analysis of
awareness, perceptions and attitudes of dentists in the World Dental
Federation-European Regional Organization zone. Int Dent J.
2015;65(3):127-45. |
|
|
|
|
|
2.
Rabe P, Holmén A, Sjögren P. Attitudes, awareness and perceptions on evidence
based dentistry and scientific publications among dental professionals in the
county of Halland, Sweden: a questionnaire survey. Swed Dent J.
2007;31(3):113-20. PMid:17970167 |
|
|
|
|
|
3.
Nagarkar S, Loguercio AD, Perdigão J. Evidence-based fact checking for
selective procedures in restorative dentistry. Clin Oral Investig.
2023;27(2):475-88. |
|
|
|
|
|
4.
Bazos P, Magne P. Bio-emulation: biomimetically emulating nature utilizing a
histo-anatomic approach; structural analysis. Eur J Esthet Dent. 2011;6(1):8-19. PMid:21403924 |
|
|
|
|
|
5.
Singer L, Fouda A, Bourauel C. Biomimetic approaches and materials in
restorative and regenerative dentistry: review article. BMC Oral Health.
2023;23(1):105. |
|
|
|
|
|
6.
Zafar MS, Amin F, Fareed MA, Ghabbani H, Riaz S, Khurshid Z, et al.
Biomimetic aspects of restorative dentistry biomaterials. Biomimetics
(Basel). 2020;5(3):34. |
|
|
|
|
|
7.
Reis A, Feitosa VP, Chibinski AC, Favoreto MW, Gutierrez MF, Loguercio AD.
Biomimetic Restorative Dentistry: an evidence-based discussion of common
myths. J Appl Oral Sci. 2024;32:e20240271. |
|
|
|
|
|
8.
Qasim SSB, Zafar MS, Niazi FH, Alshahwan M, Omar H, Daood U. Functionally
graded biomimetic biomaterials in dentistry: an evidence-based update. J
Biomater Sci Polym Ed. 2020;31(9):1144-62. |
|
|
|
|
|
9.
Vailati F, Belser UC. Full-mouth adhesive rehabilitation of a severely eroded
dentition: the three-step technique. Part 2. Eur J Esthet Dent.
2008;3(2):128-46. PMid:19655527 |
|
|
|
|
|
10.
Vailati F, Carciofo S. Treatment planning of adhesive additive
rehabilitations: the progressive wax-up of the three-step technique. Int J
Esthet Dent. 2016;11(3):356-77. PMid:27433550 |
|
|
|
|
|
11.
Sirous S, Navadeh A, Ebrahimgol S, Atri F. Effect of preparation design on
marginal adaptation and fracture strength of ceramic occlusal veneers: A
systematic review. Clin Exp Dent Res. 2022;8(6):1391-403. |
|
|
|
|
|
12.
Falahchai M, Babaee Hemmati Y, Neshandar Asli H, Rezaei E. Effect of tooth
preparation design on fracture resistance of Zirconia-reinforced lithium
silicate overlays. J Prosthodont. 2020;29(7):617-22. |
|
|
|
|
|
13.
Sasse M, Krummel A, Klosa K, Kern M. Influence of restoration thickness and
dental bonding surface on the fracture resistance of full-coverage occlusal
veneers made from lithium disilicate ceramic. Dent Mater. 2015;31(8):907-15. |
|
|
|
|
|
14.
Mueller B, Pilecco RO, Valandro LF, Ruschel VC, Pereira GKR, Bernardon JK.
Effect of immediate dentin sealing on load-bearing capacity under accelerated
fatigue of thin occlusal veneers made of CAD-CAM glass-ceramic and resin
composite material. Dent Mater. 2023;39(4):372-82. |
|
|
|
|
|
15.
Al-Akhali M, Chaar MS, Elsayed A, Samran A, Kern M. Fracture resistance of
ceramic and polymer-based occlusal veneer restorations. J Mech Behav Biomed
Mater. 2017;74:245-50. |
|
|
|
|
|
16.
In vitro fatigue resistance of CAD/CAM composite resin and ceramic posterior
occlusal veneers. J Prosthet Dent. 2010;104(3):149-57. |
|
|
|
|
|
17.
Fatigue resistance of ultrathin CAD/CAM ceramic and nanoceramic composite
occlusal veneers. Dent Mater. 2019;35(10):1370-7. |
|
|
|
|
|
18.
Ruggiero MM, Soares Gomes R, Pedroso Bergamo ET, Freitas MIM, Bonfante EA,
Del Bel Cury AA. Resin-matrix ceramics for occlusal veneers: Effect of
thickness on reliability and stress distribution. Dent Mater.
2020;37(3):e131-9. |
|
|
|
|
|
19.
Johnson AC, Versluis A, Tantbirojn D, Ahuja S. Fracture strength of CAD/CAM
composite and composite-ceramic occlusal veneers. J Prosthodont Res.
2014;58(2):107-14. |
|
|
|
|
|
20.
Ludovichetti FS, Trindade FZ, Werner A, Kleverlaan CJ, Fonseca RG. Wear
resistance and abrasiveness of CAD-CAM monolithic materials. J Prosthet Dent.
2018;120(2):318.e1-318.e8. |
|
|
|
|
|
21.
Laborie M, Naveau A, Menard A. CAD-CAM resin-ceramic material wear: A
systematic review. J Prosthet Dent. 2022;131(5):812-8. |
|
|
|
|
|
22.
Ultrathin CAD-CAM glass-ceramic and composite resin occlusal veneers for the
treatment of severe dental erosion: An up to 3-year randomized clinical
trial. J Prosthet Dent. 2022;128(2):158.e1-158.e12. |
|
|
|
|
|
23.
Lan TH, Chen PH, Fok ASL, Chen YF. Contact fracture test of monolithic hybrid
ceramics on different substrates for bruxism. Dent Mater. 2021;38(1):44-56. |
|
|
|
|
|
24.
Schroeder G, Rösch P, Kunzelmann K-H. Influence of the preparation design on
the survival probability of occlusal veneers. Dent Mater. 2022;38(4):646-54. |
|
|
|
|
|
25.
Indrastuti M, Regina J, Antono J, Aditama P, Maharani AS, Yunizar MF.
Comparison of different dentin bonding agents in immediate dentin sealing and
resin coating. J Int Dent Med Res. 2024;17(4):1504-1509. PMid:17854617 |
|
|
|
|
|
26.
Muñoz MA, Sezinando A, Luque-Martinez I, Szesz AL, Reis A, Loguercio AD, et
al. Influence of a hydrophobic resin coating on the bonding efficacy of three
universal adhesives. J Dent. 2014;42(5):595-602. |
|
|
|
|
|
27.
Sezinando A, Luque-Martinez I, Muñoz MA, Reis A, Loguercio AD, Perdigão J.
Influence of a hydrophobic resin coating on the immediate and 6-month dentin
bonding of three universal adhesives. Dent Mater. 2015;31(10):e236-46. |
|
|
|
|
|
28.
Shimokawa CAK, Turbino ML, Giannini M, Braga RR, Price RB. Effect of light
curing units on the polymerization of bulk fill resin-based composites. Dent
Mater. 2018;34(8):1211-21. |
|
|
|
|
|
29.
Magne P, Kim TH, Cascione D, Donovan TE. Immediate dentin sealing improves
bond strength of indirect restorations. J Prosthet Dent. 2005;94(6):511-9. |
|
|
|
|
|
30.
Saleh ARM, Al-Ani M, ALRawi T, Al-Edressi G. An in-vitro comparison of
fracture resistance of three CAD/CAM Ceramic materials for fabricating
Veneer. Saudi Dent J. 2020;33(7):745-52. |
|
|
|
|
|
31.
Czechowski Ł, Dejak B, Konieczny B, Krasowski M. Evaluation of fracture
resistance of occlusal veneers made of different types of materials depending
on their thickness. Materials (Basel). 2023;16(17). |
|
|
|
|
|
32.
Ioannidis A, Mühlemann S, Özcan M, Hüsler J, Hämmerle CHF, Benic GI.
Ultra-thin occlusal veneers bonded to enamel and made of ceramic or hybrid
materials exhibit load-bearing capacities not different from conventional
restorations. J Mech Behav Biomed Mater. 2018;90:433-40. |
|
|
|
|
|
33.
Magne P. Immediate dentin sealing: a fundamental procedure for indirect
bonded restorations. J Esthet Restor Dent. 2005;17(3):144-54; discussion 155. |
|
|
|
|
|
34.
Ozer F, Batu Eken Z, Hao J, Tuloglu N, Blatz MB. Effect of immediate dentin
sealing on the bonding performance of indirect restorations: A systematic
review. Biomimetics (Basel). 2024;9(3):182. |
|
|
|
|
|
35.
Akkus A, Karasik D, Roperto R. Correlation between micro-hardness and mineral
content in healthy human enamel. J Clin Exp Dent. 2017;9(4):e569-73. |
|
|
|
|
|
36.
Gil-Bona A, Bidlack FB. Tooth Enamel and its Dynamic Protein Matrix. Int J
Mol Sci. 2020;21(12). |
|
|
|
|
|
37.
Kruzic JJ, Hoffman M, Arsecularatne JA. Fatigue and wear of human tooth
enamel: A review. J Mech Behav Biomed Mater. 2022;138:105574. |
|
|
|
|
|
38.
El-Mowafy O, El-Aawar N, El-Mowafy N. Porcelain veneers: An update. Dent Med
Probl. 2018;55(2):207-11. |
|
|
|
|
|
39.
Gierthmuehlen PC, Spitznagel FA, Koschate M, Bonfante EA, Prott LS. Influence
of ceramic thickness and dental substrate on the survival rate and failure
load of non-retentive occlusal veneers after fatigue. J Esthet Restor Dent.
2023;36(2):373-80. |
|
|
|
|
|
40.
Albero A, Pascual A, Camps I, Grau-Benitez M. Comparative characterization of
a novel cad-cam polymer-infiltrated-ceramic-network. J Clin Exp Dent.
2015;7(4):e495-500. |
|
|
|
|
|
41.
Saravia-Rojas MÁ, Huanambal-Tiravanti VA, Geng-Vivanco R, Pires-de-Souza F de
CP, Balarezo-Razzeto JA. Different surface treatments on recently introduced
CAD-CAM resin-modified ceramics: Implications on bond strength. J Prosthet
Dent. 2024;05.032 |
|
|
|
|
|
42.
Gibbs CH, Mahan PE, Mauderli A, Lundeen HC, Walsh EK. Limits of human bite
strength. J Prosthet Dent. 1986;56(2):226-9. |
|
|
|
|
|
43.
Cosme DC, Baldisserotto SM, Canabarro S de A, Shinkai RS. Bruxism and
voluntary maximal bite force in young dentate adults. Int J Prosthodont.
2005;18(4):328-32. PMid:16052788 |
|
|
|
|
|
44.
Regalo SCH, Santos CM, Vitti M, Regalo CA, de Vasconcelos PB, Mestriner W Jr,
et al. Evaluation of molar and incisor bite force in indigenous compared with
white population in Brazil. Arch Oral Biol. 2008;53(3):282-6. |
|
|
|
|
|
45.
de Abreu RAM, Pereira MD, Furtado F, Prado GPR, Mestriner W Jr, Ferreira LM.
Masticatory efficiency and bite force in individuals with normal occlusion.
Arch Oral Biol. 2014;59(10):1065-74. |
|