Pérez-Pachas B, Shibuya-Panduro F, Castro-Ramirez L, Cervantes-Ganoza L,
Ladera-Castañeda M, Huamani-Echaccaya J, Cayo-Rojas C. Surface microhardness
and depth of cure in bulk fill resin composites with and without preheating: An
in vitro study. J Clin Exp Dent. 2025;17(7):e825-33.
doi:10.4317/jced.62844
https://doi.org/10.4317/jced.62844
___
References
|
1.
Dionysopoulos D, Gerasimidou O. Wear of contemporary dental composite resin
restorations: a literature review. Restor Dent Endod. 2021;46(2):e18. |
|
|
|
|
|
2.
Berto-Inga J, Santander-Rengifo F, Ladera-Castañeda M, López-Gurreonero C,
Castro Pérez-Vargas A, Cornejo-Pinto A, et al. Surface microhardness of
bulk-fill resin composites handled with gloves. Int Dent J. 2023;73(4):489-495. |
|
|
|
|
|
3.
Cayo C, Carrillo A. Marginal sealing applying sodium hypochlorite versus
phosphoric acid as dental conditioner. Rev Cubana Estomatol. 2020;57:e2872. |
|
|
|
|
|
4.
Alshehri A, Alhalabi F, Robaian A, Abuelqomsan MAS, Alshabib A, Ismail E, et
al. No-Cap Flowable Bulk-Fill Composite: Physico-Mechanical Assessment.
Polymers. 2023;15(8):1847. |
|
|
|
|
|
5.
Cayo C, Llancari L, Mendoza R, Cervantes L. Marginal filling and adhesive
resistance of bulk fill resin applying 18% EDTA gel compared with 37%
phosphoric acid gel in vitro dental conditioning. J Oral Res.
2019;8(3):228-235. |
|
|
|
|
|
6.
Grazioli G, Cuevas-Suárez CE, Nakanishi L, Francia A, de Moraes RR.
Physicochemical characterization of two bulk fill composites at different depths.
Restor Dent Endod. 2021;46(3):e39. |
|
|
|
|
|
7.
Silva MF, Dias MF, Lins-Filho PC, Silva CH, Guimarães RP. Color stability of
Bulk-Fill composite restorations. J Clin Exp Dent. 2020;12(11):e1086-e1090. |
|
|
|
|
|
8.
Xue J. Factors influencing clinical application of bulk-fill composite resin.
Hua Xi Kou Qiang Yi Xue Za Zhi. 2020;38(3):233-239. PMid:32573127
PMCid:PMC7296366 |
|
|
|
|
|
9.
Doni, Santosa P, Nugraheni T. Comparison of depth of cure sonic-activated bulk-fill
composite, low viscosity, and high viscosity in different thickness. J Conserv
Dent. 2020;23(6):615-618. |
|
|
|
|
|
10.
Bayraktar ET, Atali PY, Korkut B, Kesimli EG, Tarcin B, Turkmen C. Effect of
Modeling Resins on Microhardness of Resin Composites. Eur J Dent. 2021;15(3):481-487. |
|
|
|
|
|
11.
Castro-Ramirez LC, Ladera-Castañeda MI, Cachay-Criado HR, Alvino-Vales MI,
López-Gurreonero C, Cervantes-Ganoza LA, et al. Comparative Evaluation of
Microtensile Bond Strength in Three Different Dentin Luting Agents: An In
vitro Study. J Int Soc Prev Community Dent. 2023;14(1):43-51. |
|
|
|
|
|
12.
Mohammadi N, Jafari-Navimipour E, Kimyai S, Ajami AA, Bahari M, Ansarin M,
Ansarin M. Effect of pre-heating on the mechanical properties of
silorane-based and methacrylate-based composites. J Clin Exp Dent. 2016;8(4):e373-e378. |
|
|
|
|
|
13.
Darabi F, Seyed-Monir A, Mihandoust S, Maleki D. The effect of preheating of
composite resin on its color stability after immersion in tea and coffee
solutions: An in-vitro study. J Clin Exp Dent. 2019;11(12):e1151-e1156. |
|
|
|
|
|
14.
Elkaffass AA, Eltoukhy RI, Elnegoly SA, Mahmoud SH. Influence of preheating
on mechanical and surface properties of nanofilled resin composites. J Clin
Exp Dent. 2020;12(5):e494-e500. |
|
|
|
|
|
15.
Ebrahimi Chaharom ME, Bahari M, Safyari L, Safarvand H, Shafaei H, Jafari
Navimipour E, et al. Effect of preheating on the cytotoxicity of bulk-fill
composite resins. J Dent Res Dent Clin Dent Prospects. 2020;14(1):19-25. |
|
|
|
|
|
16.
Ebrahimi-Chaharom ME, Safyari L, Safarvand H, Jafari-Navimipour E,
Alizadeh-Oskoee P, Ajami AA, Abed-Kahnamouei M, Bahari M. The effect of
pre-heating on monomer elution from bulk-fill resin composites. J Clin Exp
Dent. 2020;12(9):e813-e820. |
|
|
|
|
|
17.
Atasoy S, Akarsu S. Effect of repeated preheating on monomer elution from a
bulk-fill composite resin. J Dent Res Dent Clin Dent Prospects. 2023;17(4):265-270. |
|
|
|
|
|
18.
Krithikadatta J, Gopikrishna V, Datta M. CRIS guidelines (checklist for
reporting in-vitro studies): a concept note on the need for standardized
guidelines for improving quality and transparency in reporting in-vitro
studies in experimental dental research. J Conserv Dent. 2014;17:301-304. |
|
|
|
|
|
19.
Al-Shekhli AAR, Al-Aubi I. Curing Effectiveness of Bulk-fill Composites.
World J Dent. 2018;9(5):361-365. |
|
|
|
|
|
20.
Kaptan A, Kaya S, Eren D. Influence of Different Led Curing-Units on Depth of
Cure and Micro-Hardness of Nano-Hybrid Resin Composite. Cumhuriyet Dent J.
2021;24(1): 88-95. |
|
|
|
|
|
21.
Aggarwal N, Jain A, Gupta H, Abrol A, Singh C, Rapgay T. The comparative
evaluation of depth of cure of bulk-fill composites - An in vitro study. J
Conserv Dent. 2019; 22(4): 371-375. |
|
|
|
|
|
22.
Novin M, Yousefi A. The Effect of Shade and Thickness on the Depth of Cure of
Bulk-Fill Composites with Different Viscosities. J Dent (Shiraz). 2020;21(4):322-329. PMid:33344683
PMCid:PMC7737920 |
|
|
|
|
|
23.
Pedram P, Jafarnia S, Shahabi S, Saberi S, Hajizamani H. Comparative
evaluation of fiber-reinforced, bulk-fill and conventional dental composites:
Physical characteristics and polymerization properties. Polim Med.
2022;52(1):13-18. |
|
|
|
|
|
24.
Keleş ZH, Tarım B. Effect of Preheating on Microhardness, Degree of
Conversion, and Depth of Cure of Various Bulk-Fill Composites. Selcuk Dent J.
2024;11(1): 27-32. |
|
|
|
|
|
25.
Değirmenci A, Bilgili Can D. Pre-Heating Effect on the Microhardness and
Depth of Cure of Bulk-Fill Composite Resins. Odovtos - Int J Dent Sc.
2021;24(1):99-112. |
|
|
|
|
|
26.
Alvarado-Santillán GH, Huertas Mogollón GA. Resina precalentada como agente
cementante: una revisión de tema. Rev. CES Odont. 2020;33(2):159-174. |
|
|
|
|
|
27.
Tapety CMC, Carneiro YKP, Chagas YM, Souza LC, de O Souza N, Valadas LAR.
Degree of Conversion and Mechanical Properties of a Commercial Composite with
an Advanced Polymerization System. Acta Odontol Latinoam. 2023;36(2):112-119. |
|
|
|
|
|
28.
Carrillo-Marcos A, Salazar-Correa G, Castro-Ramirez L, Ladera-Castañeda M,
López-Gurreonero C, Cachay-Criado H, et al. The Microhardness and Surface
Roughness Assessment of Bulk-Fill Resin Composites Treated with and without
the Application of an Oxygen-Inhibited Layer and a Polishing System: An In
Vitro Study. Polymers (Basel). 2022;14(15):3053. |
|
|
|
|
|
29.
Daronch M, Rueggeberg FA, Moss L, De Goes M. Clinically Relevant Issues
Related to Preheating Composites. J Esthet Restor Dent. 2006;18 (6):340-50;discusión
351. |
|
|
|
|
|
30.
Nascimento Batista JM, Sinhoreti MAC, Alves Fraga MA, Manoel da Silva MV,
Correr AB, Roulet JF, et al. Effect of preheating on mechanical properties of
a resin-based composite containing elastomeric urethane monomer. J Mech Behav
Biomed Mater. 2023;141:105758. |
|
|
|
|
|
31.
Kotecha N, Shah NC, Gandhi NN, Porwal P, Pawar AM, Wahjudianto N, et al.
Evaluation of pre-heated composite resins with soft-start polymerization and
conventional composite restorations in class-I carious lesions - A randomized
clinical trial. Heliyon. 2024;10(10):e30794. |
|
|
|
|
|
32.
Prasanna N, Pallavi Reddy Y, Kavitha S, Lakshmi Narayanan L. Degree of
conversion and residual stress of preheated and room-temperature composites.
Indian Journal of Dental Research. 2007;18(4):173-176. |
|
|
|
|
|
33.
Elkaffas AA, Eltoukhy RI, Elnegoly SA, Mahmoud SH. The effect of preheating
resin composites on surface hardness: a systematic review and meta-analysis.
Restor Dent Endod. 2019;44(4):e41. |
|
|
|
|
|
34.
Oliveira Boeira P, de Azevedo Kinalski M, Bertolini Fernandes dos Santos M,
Ratto de Moraes R, Silveira Lima G. Polywave and monowave light-curing units
effects on polymerization efficiency of different photoinitiators. Braz Dent
Sci. 2021;24(4). |
|
|
|
|
|
35.
Daronch M, Rueggeberg FA, De Goes MF. Monomer conversion of pre-heated
composite. J Dent Res. 2005;84(7):663-7. |
|
|
|
|
|
36.
Menees TS, Lin CP, Kojic DD, Burgess JO, Lawson NC. Depth of cure of bulk
fill composites with monowave and polywave curing lights. Am J Dent.
2015;28(6):357-61. PMid:26897758
PMCid: PMC4924346 |
|
|
|
|
|
37.
Gan JK, Yap AU, Cheong JW, Arista N, Tan C. Bulk-Fill Composites:
Effectiveness of Cure With Poly- and Monowave Curing Lights and Modes. Oper
Dent. 2018;43(2):136-143. |
|
|
|
|
|
38.
Gutierrez-Leiva A, Pomacóndor-Hernández C. Comparación de la profundidad de
polimerización de resinas compuestas bulk fill obtenida con dos unidades de
fotoactivación LED: polywave versus monowave. Odontol Sanmarquina. 2020;23(2):131-8. |
|
|
|
|
|
39.
Burke F. Case study: Aura Bulk Fill Composite. (Internet). SDI. 2017 (cited
2025 Jan 3). Available from: https://www.sdi.com.au/wp-content/uploads/2017/08/Aura_Case_Study_12_Burke_EN.pdf |
|
|
|
|
|
40.
Singha A, Dhanesha A, Nair S, Patel R, Behera S, Nanda S. Pre-heating effect
on micro-hardness and depth of cure for three bulk-fill composite resins: An
in vitro study. Bioinformation. 2024;20(9):1128-1131. |
|
|
|
|
|
41.
Flury S., Hayoz S., Peutzfeldt A, Hüsler J., Lussi A. Depth of cure of resin
composites: is the ISO 4049 method suitable for bulk fill materials? Dent
Mater. 2012;28(5):521-8. |
|