Restrepo AM,
Giraldo CA, Torres-López AM, Latorre-Correa F, Ardila CM. Effect of two
multi-step polishing systems on surface characteristics of nanohybrid composite
resins: Influence of reuse. J Clin Exp Dent. 2025;17(8):e929-35.
doi:10.4317/jced.62873
https://doi.org/10.4317/jced.62873
___
References
|
1.
Komalsingsakul A, Klaophimai A, Srisatjaluk RL, Senawongse P. Effect of the
surface roughness of composite resins on the water contact angle and biofilm
formation. Dent J (Basel). 2019;39:75-84. |
|
|
|
|
|
2.
Pierre LS, Martel C, Crépeau H, Vargas M. Influence of polishing systems on
surface roughness of composite resins: Polishability of composite resins.
Oper Dent. 2019;44:122-32. |
|
|
|
|
|
3.
Daud A, Gray G, Lynch CD, Wilson NHF, Blum IR. A randomized controlled study
on the use of finishing and polishing systems on different resin composites
using 3D contact optical profilometry and scanning electron microscopy. J
Dent. 2018;71:25-30. |
|
|
|
|
|
4.
Jung M, Klimek J, Eichelberger K. Surface geometry of four nanofiller and one
hybrid composite after one-step and multiple-step polishing. Oper Dent. 2007;32:347-55. |
|
|
|
|
|
5.
Lazarchik DA, Hammond BD, Sikes CL, Looney SW, Rueggeberg FA. Hardness
comparison of bulk-filled/transtooth and incremental-filled/occlusally
irradiated composite resins. J Prosthet Dent. 2007;98:129-40. |
|
|
|
|
|
6.
Bilgili D, Dündar A, Barutçugil Ç, Tayfun D, Özyurt ÖK. Surface properties
and bacterial adhesion of bulk-fill composite resins. J Dent. 2020;95:103305. |
|
|
|
|
|
7.
Ferracane JL. Resin composite-State of the art. Dent Mater. 2010;26:29-38. |
|
|
|
|
|
8.
Da Costa J, Ferracane JL, Paravina RD, Mazur RF, Roeder L. The effect of
different polishing systems on surface roughness and gloss of various resin
composites. J Esthet Restor Dent. 2007;19:214-24. |
|
|
|
|
|
9.
Anusavice KJ, Shen C, Rawls HR. Mechanical properties of dental materials.
In: Phillips' Science of Dental Materials. 12th ed. St. Louis, MO:
Elsevier/Saunders; 2013. p. 285. |
|
|
|
|
|
10.
3M. Filtek™ Supreme XTE Universal Restorative System Technical Profile
Available from:
https://multimedia.3m.com/mws/media/1941730/filtektm-supreme-technicalprofile.pdf |
|
|
|
|
|
11.
Gonçalves MA, Teixeira VCF, Rodrigues SSMFG, de Oliveira RSMF, Salvio LA.
Evaluation of the roughness of composite resins submitted to different
surface treatments. Acta Odontol Latinoam. 2012;25:89-95. |
|
|
|
|
|
12.
Madhyastha PS, Naik DG, Srikant N, Kotian R, Bhat K. Effect of
finishing/polishing techniques and time on surface roughness of silorane- and
methacrylate-based restorative materials. Oral Health Dent Manag.
2015;14(4):212-8. PMid:29109747
PMCid:PMC5654227 |
|
|
|
|
|
13.
Korkmaz Y, Ozel E, Attar N, Aksoy G. The influence of one-step polishing
systems on the surface roughness and microhardness of nanocomposites. Oper
Dent. 2008;33:44-50. |
|
|
|
|
|
14.
Wheeler J, Deb S, Millar BJ. Evaluation of the effects of polishing systems
on surface roughness and morphology of dental composite resin. Br Dent J.
2020;228:527-32. |
|
|
|
|
|
15.
Patel B, Chhabra N, Jain D. Effect of different polishing systems on the
surface roughness of nano-hybrid composites. J Conserv Dent. 2016;19:37-40. |
|
|
|
|
|
16.
Türkün L. Effect of re-use of a disposable micro-polisher on the surface of a
microhybrid resin composite. Am J Dent. 2004;17:279-82. PMid:15478491 |
|
|
|
|
|
17.
International Organization for Standardization (ISO). ISO 8486-1:1996 -
Bonded abrasives - Determination of grain size distribution. 2017. Available
from:
http://www.nrcs.usda.gov/wps/portal/nrcs/detail/soils/survey/office/ssr10/tr/?cid=nrcs144p2_074845#item1b |
|
|
|
|
|
18.
Takanashi E, Kishikawa R, Ikeda M, Inai N, Otsuki M, Foxton RM, et al.
Influence of abrasive particle size on surface properties of flowable
composites. Dent Mater J. 2008;27:780-6. |
|
|
|
|
|
19.
Güntekin N, Tunçdemir AR. Comparison of volumetric loss and surface roughness
of composite dental restorations obtained by additive and subtractive
manufacturing methods. Heliyon. 2024;10(4):e26269. |
|
|
|
|
|
20.
Alharbi G, Al Nahedh HN, Al-Saud LM, Shono N, Maawadh A. Effect of different
finishing and polishing systems on surface properties of universal single
shade resin-based composites. BMC Oral Health. 2024;24(1):197. |
|
|
|
|
|
21.
Marghalani HY. Effect of finishing/polishing systems on the surface roughness
of novel posterior composites. J Esthet Restor Dent. 2010;22:127-38. |
|
|
|
|
|
22.
Dennis T, Zoltie T, Wood D, Altaie A. Reduced-step composite polishing
systems - a new gold standard? J Dent. 2021;112:103769. |
|
|
|
|
|
23
Jaramillo-Cartagena R, López-Galeano EJ, Latorre-Correa F, Agudelo-Suárez AA.
Effect of polishing systems on the surface roughness of nano-hybrid and
nano-filling composite resins: A systematic review. Dent J (Basel).
2022;9:1-17. |
|
|
|
|
|
24.
Soliman HAN, Elkholany NR, Hamama HH, El-Sharkawy FM, Mahmoud SH, Comisi JC.
Effect of different polishing systems on the surface roughness and gloss of
novel nanohybrid resin composites. Eur J Dent. 2021;15:259-65. |
|
|
|
|
|
25.
Altınışık H, Özyurt E. Effect of different polishing systems on surface
roughness and gloss values of single-shade resin composites. BMC Oral Health.
2024;24:1391. |
|
|
|
|
|
26.
Uribe-Hernández L, Latorre-Correa F, Perea-Lowery L, Ardila CM. Effect of
preheating and curing lamp distance on the degree of conversion of four
nanohybrid resins: An in vitro study. J Clin Exp Dent. 2024;16:e975-e983. |
|
|
|
|
|
27.
Pineda-Vélez E, Yadalam PK, Ardila CM. Efficacy of the finite element analysis
in assessing the effects of light curing on the mechanical properties of
direct restorative composites: A systematic review. J Clin Exp Dent.
2024;16:e1411-e1421. |
|