Albelasy EH,
Raghip AG, Ismail HS. Internal adaptation and micromorphological analysis of a
new self-cure resin composite. J Clin Exp Dent. 2025;17(8):e912-9.
doi:10.4317/jced.62900
https://doi.org/10.4317/jced.62900
___
References
|
1.
Bausch JR, de Lange K, Davidson CL, Peters A, de Gee AJ. Clinical
significance of polymerization shrinkage of composite resins. J Prosthet Dent.
1982;48(1):59-67. |
|
|
|
|
|
2.
Schneider LF, Cavalcante LM, Silikas N. Shrinkage Stresses Generated during
Resin-Composite Applications: A Review. J Dent Biomech. 2010;2010:131630. PMid:20948573
PMCid:PMC2951111 |
|
|
|
|
|
3.
Ferracane JL. Developing a more complete understanding of stresses produced
in dental composites during polymerization. Dent Mater. 2005;21(1):36-42. |
|
|
|
|
|
4.
Cho E, Sadr A, Inai N, Tagami J. Evaluation of resin composite polymerization
by three dimensional micro-CT imaging and nanoindentation. Dent Mater.
2011;27(11):1070-8. |
|
|
|
|
|
5.
Guarneri JAG, Maucoski C, Ghaffari S, MacNeil BD, Price RB, Arrais CAG. Ability
of a novel primer to enhance the polymerization of a self-cured resin
composite. Dent Mater. 2025;41(1):42-50. |
|
|
|
|
|
6.
Jakubiak J, Allonas X, Fouassier JP, Sionkowska A, Andrzejewska E, Linden LÅ,
et al. Camphorquinone-amines photoinitating systems for the initiation of
free radical polymerization. Polymer. 2003;44(18):5219-26. |
|
|
|
|
|
7.
Albuquerque PP, Moreira AD, Moraes RR, Cavalcante LM, Schneider LF. Color
stability, conversion, water sorption and solubility of dental composites
formulated with different photoinitiator systems. J Dent. 2013;41 Suppl
3:e67-72. |
|
|
|
|
|
8.
Palin WM, Leprince JG, Hadis MA. Shining a light on high volume photocurable
materials. Dent Mater. 2018;34(5):695-710. |
|
|
|
|
|
9.
Maucoski C, Price RB, Rocha MG, Roulet JF, Sullivan B. Ability of short
exposures from laser and quad-wave curing lights to photo-cure bulk-fill
resin-based composites. Dent Mater. 2023;39(3):275-92. |
|
|
|
|
|
10.
Ferracane JL, Mitchem JC, Condon JR, Todd R. Wear and marginal breakdown of
composites with various degrees of cure. J Dent Res. 1997;76(8):1508-16. |
|
|
|
|
|
11.
Maktabi H, Ibrahim MS, Balhaddad AA, Alkhubaizi Q, Garcia IM, Collares FM, et
al. Improper Light Curing of Bulkfill Composite Drives Surface Changes and
Increases S. mutans Biofilm Growth as a Pathway for Higher Risk of Recurrent
Caries around Restorations. Dent J (Basel). 2021;9(8):10. |
|
|
|
|
|
12.
Hass V, Dobrovolski M, Zander-Grande C, Martins GC, Gordillo LA, Rodrigues
Accorinte Mde L, et al. Correlation between degree of conversion,
resin-dentin bond strength and nanoleakage of simplified etch-and-rinse
adhesives. Dent Mater. 2013;29(9):921-8. |
|
|
|
|
|
13.
Faria ESAL, Pfeifer CS. Development of dual-cured resin cements with long
working time, high conversion in absence of light and reduced polymerization
stress. Dent Mater. 2020;36(10):e293-e301. |
|
|
|
|
|
14.
Dimitriadi M, Petropoulou A, Zinelis S, Eliades G. Degree of conversion of
dual-cured composite luting agents: The effect of transition metal-based
touch-cure activators. J Dent. 2024;147:105147. |
|
|
|
|
|
15.
Wang R, Wang Y. Depth-dependence of Degree of Conversion and Microhardness
for Dual-cure and Light-cure Composites. Oper Dent. 2020;45(4):396-406. |
|
|
|
|
|
16.
Thadathil Varghese J, Raju R, Farrar P, Prentice L, Prusty BG. Comparative
analysis of self-cure and dual cure-dental composites on their
physico-mechanical behaviour. Aust Dent J. 2024;69(2):124-38. |
|
|
|
|
|
17.
Pires PM, de Almeida Neves A, Lukomska-Szymanska M, Farrar P, Cascales AF,
Sauro S. Bonding performance and interfacial adaptation of modern bulk-fill
restorative composites after aging in artificial saliva: an in vitro study.
Clin Oral Investig. 2024;28(2):132. |
|
|
|
|
|
18.
Mulder R, Noordien N, Potgieter N. Comparing cytocompatibility of two
fluoride-containing solutions and two resin-based restorative materials-a
pilot study. Front Oral Health. 2024;5:1330944. |
|
|
|
|
|
19.
Han SH, Sadr A, Tagami J, Park SH. Internal adaptation of resin composites at
two configurations: Influence of polymerization shrinkage and stress. Dent
Mater. 2016;32(9):1085-94. |
|
|
|
|
|
20.
Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, De Stefano Dorigo
E. Dental adhesion review: aging and stability of the bonded interface. Dent
Mater. 2008;24(1):90-101. |
|
|
|
|
|
21.
Khvostenko D, Salehi S, Naleway SE, Hilton TJ, Ferracane JL, Mitchell JC, et
al. Cyclic mechanical loading promotes bacterial penetration along composite
restoration marginal gaps. Dent Mater. 2015;31(6):702-10. |
|
|
|
|
|
22.
Amaral FL, Colucci V, Palma-Dibb RG, Corona SA. Assessment of in vitro
methods used to promote adhesive interface degradation: a critical review. J
Esthet Restor Dent. 2007;19(6):340-53;discussion 54. |
|
|
|
|
|
23.
Pashley DH, Tay FR, Yiu C, Hashimoto M, Breschi L, Carvalho RM, et al.
Collagen degradation by host-derived enzymes during aging. J Dent Res.
2004;83(3):216-21. |
|
|
|
|
|
24.
De Munck J, Van Landuyt K, Peumans M, Poitevin A, Lambrechts P, Braem M, et
al. A critical review of the durability of adhesion to tooth tissue: methods
and results. J Dent Res. 2005;84(2):118-32. |
|
|
|
|
|
25.
Ferracane JL, Berge HX, Condon JR. In vitro aging of dental composites in
water--effect of degree of conversion, filler volume, and filler/matrix
coupling. J Biomed Mater Res. 1998;42(3):465-72. |
|
|
|
|
|
26.
Nema V, Kunsagi-Mate S, Ori Z, Kiss T, Szabo P, Szalma J, et al. Relation
between internal adaptation and degree of conversion of short-fiber
reinforced resin composites applied in bulk or layered technique in deep MOD
cavities. Dent Mater. 2024;40(4):581-92. |
|
|
|
|
|
27.
Kaczor-Wiankowska K, Lipa S, Krasowski M, Sokolowski J, Lewusz-Butkiewicz K,
Nowicka A. Evaluation of gap formation at the composite resin-tooth interface
after using universal adhesives: In vitro SEM study using the replica
technique. Microsc Res Tech. 2020;83 (2):176-85. |
|
|
|
|
|
28.
Peutzfeldt A, Asmussen E. Determinants of in vitro gap formation of resin
composites. J Dent. 2004;32(2):109-15. |
|
|
|
|
|
29.
Rosatto CM, Bicalho AA, Verissimo C, Braganca GF, Rodrigues MP, Tantbirojn D,
et al. Mechanical properties, shrinkage stress, cuspal strain and fracture
resistance of molars restored with bulk-fill composites and incremental
filling technique. J Dent. 2015;43(12):1519-28. |
|
|
|
|
|
30.
Hughes KO, Powell KJ, Hill AE, Tantbirojn D, Versluis A. Delayed
Photoactivation of Dual-cure Composites: Effect on Cuspal Flexure,
Depth-of-cure, and Mechanical Properties. Oper Dent. 2019;44(2):E97-E104. |
|
|
|
|
|
31.
Burrer P, Par M, Furer L, Stubi M, Marovic D, Tarle Z, et al. Effect of
polymerization mode on shrinkage kinetics and degree of conversion of
dual-curing bulk-fill resin composites. Clin Oral Investig.
2023;27(6):3169-80. |
|
|
|
|
|
32.
Araujo-Neto VG, Nobre CFA, De Paula DM, Souza LC, Silva JC, Moreira MM, et
al. Glycerol-dimethacrylate as alternative hydrophilic monomer for HEMA
replacement in simplified adhesives. J Mech Behav Biomed Mater.
2018;82:95-101. |
|
|
|
|
|
33.
Ludovichetti FS, Lucchi P, Zambon G, Pezzato L, Bertolini R, Zerman N, et al.
Depth of Cure, Hardness, Roughness and Filler Dimension of Bulk-Fill
Flowable, Conventional Flowable and High-Strength Universal Injectable
Composites: An In Vitro Study. Nanomaterials (Basel). 2022;12(12):10. |
|
|
|
|
|
34.
Choi KK, Condon JR, Ferracane JL. The effects of adhesive thickness on
polymerization contraction stress of composite. J Dent Res. 2000;79(3):812-7. |
|
|
|
|
|
35.
Baldi A, Rossi T, Comba A, Monticone L, Paolone G, Sannino I, et al. Three-Dimensional
Internal Voids and Marginal Adaptation in Deep Margin Elevation Technique:
Efficiency of Highly Filled Flowable Composites. J Adhes Dent.
2024;26:223-30. PMid:39397757
PMCid:PMC11748039 |
|
|
|
|
|
36.
Szczesio-Wlodarczyk A, Garoushi S, Vallittu P, Bociong K, Lassila L. Polymerization
shrinkage of contemporary dental resin composites: Comparison of three
measurement methods with correlation analysis. J Mech Behav Biomed Mater.
2024;152:106450. |
|
|
|
|
|
37.
Sauro S, Pashley DH. Strategies to stabilise dentine-bonded interfaces
through remineralising operative approaches - State of The Art. International
Journal of Adhesion and Adhesives. 2016;69:39-57. |
|
|
|
|
|
38.
Maciel Pires P, Davila-Sanchez A, Faus-Matoses V, Nunez Marti JM, Lo Muzio L,
Sauro S. Bonding performance and ultramorphology of the resin-dentine
interface of contemporary universal adhesives. Clin Oral Investig.
2022;26(6):4391-405. |
|
|
|
|
|
39.
Nagakane K, Yoshida Y, Hirata I, Fukuda R, Nakayama Y, Shirai K, et
al.Analysis of Chemical Interaction of 4-MET with Hydroxyapatite Using XPS.
Dental Materials Journal. 2006;25(4):645-9. |
|
|
|
|
|
40.
Kampouropoulos D, Paximada C, Loukidis M, Kakaboura A. The influence of
matrix type on the proximal contact in Class II resin composite restorations.
Oper Dent. 2010;35(4):454-62. |
|
|
|
|
|
41.
Ismail HS, Ali AI, Elawsya ME. Influence of curing mode and aging on the
bonding performance of universal adhesives in coronal and root dentin. BMC
Oral Health. 2024;24(1):1188. |
|
|
|
|
|
42.
Zheng L, Pereira PN, Nakajima M, Sano H, Tagami J. Relationship between
adhesive thickness and microtensile bond strength. Oper Dent.
2001;26(1):97-104. PMid:11203783 |
|
|
|
|
|
43.Ismail
HS, Ali AI. Effect of different restorative systems and aging on marginal
adaptation of resin composites to deep proximal margins. J Esthet Restor
Dent. 2024;36(2):346-55. |
|
|
|
|
|
44.
Federation FDIWD. Alternative direct restorative materials to dental amalgam.
Int Dent J. 2024;74(1):161-2. |
|