Saengthongpinij T, Apinsathanon P, Mahardawi B, Laoharungpisit P, Na Nan P, Aimjirakul N. Effect of denture tooth manufacturing and adhesive materials on bond strength of 3D-printed denture base. J Clin Exp Dent. 2026;18(1):e1-7.

doi:10.4317/jced.63377

___

References

1. Hackett S, Newton R, Ali R. Rehabilitating a severely worn dentition with removable prosthodontics. Br Dent J. 2023;234(6):413-21. https://doi.org/10.1038/s41415-023-5583-5 PMid:36964363 PMCid:PMC10038800

2. Goodacre CJ, Bernal G, Rungcharassaeng K, Kan JY. Clinical complications with implants and implant prostheses. J Prosthet Dent. 2003;90(2):121-32. https://doi.org/10.1016/S0022-3913(03)00212-9 PMid:12886205

3. BinMahfooz AM, Qutub OA. Effect of surface treatments and adhesive materials on the shear bond strength of artificial denture teeth to denture base resins. J Contemp Dent Pract. 2018;19(6):631-6. https://doi.org/10.5005/jp-journals-10024-2310

4. Alp G, Murat S, Yilmaz B. Comparison of flexural strength of different cad/cam pmma-based polymers. J Prosthodont. 2019;28(2):e491-e5. https://doi.org/10.1111/jopr.12755

5. Tzanakakis EG, Pandoleon P, Sarafianou A, Kontonasaki E. Adhesion of conventional, 3d-printed and milled artificial teeth to resin substrates for complete dentures: A narrative review. Polymers (Basel). 2023;15(11):2488. https://doi.org/10.3390/polym15112488 PMid:37299286 PMCid:PMC10255431

6. Dimitrova M, Vlahova A, Hristov I, Kazakova R. Bonding efficiency between artificial teeth and denture base in cad/cam and conventional complete removable dentures. Materials (Basel). 2024;17(13):3138. https://doi.org/10.3390/ma17133138 PMid:38998221 PMCid:PMC11242212

7. Shinagawa J, Inoue G, Nikaido T, Ikeda M, Burrow M, Tagami J. Early bond strengths of 4-meta/mma-tbb resin cements to cad/cam resin composite. Dental materials journal. 2018;38:28-32. https://doi.org/10.4012/dmj.2017-438 PMid:30158351

8. Reeponmaha T, Angwaravong O, Angwarawong T. Comparison of fracture strength after thermo-mechanical aging between provisional crowns made with cad/cam and conventional method. J Adv Prosthodont. 2020;12(4):218-24. https://doi.org/10.4047/jap.2020.12.4.218 PMid:32879712 PMCid:PMC7449821

9. Prpic V, Catic A, Kraljevic Simunkovic S, Bergman L, Cimic S. The shear bond strength between milled denture base materials and artificial teeth: A systematic review. Dentistry Journal. 2023;11(3):66. https://doi.org/10.3390/dj11030066 PMid:36975564 PMCid:PMC10046986

10. Aydin N, Uslu Kavrama F, Yosuncigir H, Ucar Y. A comparison of the shear bond strength between denture teeth and denture base resins manufactured either conventionally or with a 3d printer. J Prosthet Dent. 2023;130(5):742. https://doi.org/10.1016/j.prosdent.2023.08.035 PMid:37743140

11. Taghva M, Enteghad S, Jamali A, Mohaghegh M. Comparison of shear bond strength of cad/cam and conventional heat-polymerized acrylic resin denture bases to auto-polymerized and heat-polymerized acrylic resins after aging. J Clin Exp Dent. 2022;14(1):e72-e8. https://doi.org/10.4317/jced.59097 PMid:35070127 PMCid:PMC8760966

12. Cleto MP, Silva MDD, Nunes T, Viotto HEC, Coelho SRG, Pero AC. Evaluation of shear bond strength between denture teeth and 3d-printed denture base resin. J Prosthodont. 2023;32(S1):3-10. https://doi.org/10.1111/jopr.13527 PMid:35609138

13. Campbell S, Goldstein G. Angle's classification-a prosthodontic consideration: Best evidence consensus statement. J Prosthodont. 2021;30(S1):67-71. https://doi.org/10.1111/jopr.13307 PMid:33331655

14. Barbosa DB, Monteiro DR, Barão VA, Pero AC, Compagnoni MA. Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material. Gerodontology. 2009;26(3):225-31. https://doi.org/10.1111/j.1741-2358.2008.00262.x PMid:19702820

15. Kim H, Lee D, Young Lee S, Yang H, Park S-W, Lim H-P, et al. Denture flask fabrication using fused deposition modeling three-dimensional printing. Journal of Prosthodontic Research. 2020;64(2):231-4. https://doi.org/10.1016/j.jpor.2019.07.001 PMid:31699615

16. Infante L, Yilmaz B, McGlumphy E, Finger I. Fabricating complete dentures with cad/cam technology. J Prosthet Dent. 2014;111(5):351-5. https://doi.org/10.1016/j.prosdent.2013.10.014 PMid:24461946

17. Van Noort R, Cardew GE, Howard IC, Noroozi S. The effect of local interfacial geometry on the measurement of the tensile bond strength to dentin. J Dent Res. 1991;70(5):889-93. https://doi.org/10.1177/00220345910700050501 PMid:1827133

18. Vallittu PK, Ruyter IE, Nat R. The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers. J Prosthet Dent. 1997;78(2):194-9. https://doi.org/10.1016/S0022-3913(97)70125-2 PMid:9260138

19. Suzuki S, Sakoh M, Shiba A. Adhesive bonding of denture base resins to plastic denture teeth. J Biomed Mater Res. 1990;24(8):1091-103. https://doi.org/10.1002/jbm.820240811 PMid:2203795

20. Takahashi Y, Chai J, Takahashi T, Habu T. Bond strength of denture teeth to denture base resins. Int J Prosthodont. 2000;13(1):59-65.

21. Mine A, Kabetani T, Kawaguchi-Uemura A, Higashi M, Tajiri Y, Hagino R, et al. Effectiveness of current adhesive systems when bonding to cad/cam indirect resin materials: A review of 32 publications. Jpn Dent Sci Rev. 2019;55(1):41-50. https://doi.org/10.1016/j.jdsr.2018.10.001 PMid:30733844 PMCid:PMC6354283

22. Prpić V, Schauperl Z, Glavina D, Ćatić A, Čimić S. Comparison of shear bond strengths of different types of denture teeth to different denture base resins. J Adv Prosthodont. 2020;12(6):376-82. https://doi.org/10.4047/jap.2020.12.6.376 PMid:33489022 PMCid:PMC7790604

23. Jeong KW, Kim SH. Influence of surface treatments and repair materials on the shear bond strength of cad/cam provisional restorations. J Adv Prosthodont. 2019;11(2):95-104. https://doi.org/10.4047/jap.2019.11.2.95 PMid:31080570 PMCid:PMC6491361

24. Revilla-León M, Özcan M. Additive manufacturing technologies used for processing polymers: Current status and potential application in prosthetic dentistry. J Prosthodont. 2019;28(2):146-58. https://doi.org/10.1111/jopr.12801 PMid:29682823

25. Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. Polymers for 3d printing and customized additive manufacturing. Chemical Reviews. 2017;117(15):10212-90. https://doi.org/10.1021/acs.chemrev.7b00074 PMid:28756658 PMCid:PMC5553103

26. Yoshida Y, Yoshihara K, Nagaoka N, Hayakawa S, Torii Y, Ogawa T, et al. Self-assembled nano-layering at the adhesive interface. J Dent Res. 2012;91(4):376-81. https://doi.org/10.1177/0022034512437375 PMid:22302145

27. Choi JJE, Uy CE, Plaksina P, Ramani RS, Ganjigatti R, Waddell JN. Bond strength of denture teeth to heat-cured, cad/cam and 3d printed denture acrylics. J Prosthodont. 2020;29(5):415-21. https://doi.org/10.1111/jopr.13125 PMid:31697004