da Cruz BS, Dal Piva AMO, Tribst JPM, Lena IM, Werner A, de Melo RM, Kleverlaan CJ. The effect of thickness and sintering mode on the impact strength of a graded Zirconia. J Clin Exp Dent. 2026;18(5):e671-80.

doi:10.4317/jced.64108

___

References

1. Zhang Y, Kelly JR. Dental Ceramics for Restoration and Metal Veneering. Dent Clin North Am 2017;61:797-819. https://doi.org/10.1016/j.cden.2017.06.005 PMid:28886769 PMCid:PMC5657342

2. Green DJ, Hannink RHJ, Swain MV. Transformation Toughening of Ceramics. Boca Raton: CRC Press; 1989.

3. Čokić SM, Cóndor M, Vleugels J, et al. Mechanical properties-translucency-microstructure relationships in commercial monolayer and multilayer monolithic zirconia ceramics. Dent Mater 2022; 38:797-810. https://doi.org/10.1016/j.dental.2022.04.011 PMid:35450705

4. Zhang Y, Lawn BR. Novel Zirconia Materials in Dentistry. J Dent Res 2018; 97:140-147. https://doi.org/10.1177/0022034517737483 PMid:29035694 PMCid:PMC5784474

5. Strasser T, Wertz M, Koenig A, Rosentritt M. Microstructure, composition, and flexural strength of different layers within zirconia materials with strength gradient. Dent Mater 2023; 39:463-468. https://doi.org/10.1016/j.dental.2023.03.012 PMid:36907821

6. Winter A, Schurig A, Odenthal AL, Schmitter M. Impact of different layers within a blank on mechanical properties of multi-layered zirconia ceramics before and after thermal aging. Dent Mater 2022; 38:e147-e154. https://doi.org/10.1016/j.dental.2022.03.009 PMid:35351335

7. Rosentritt M, Preis V, Schmid A, Strasser T. Multilayer zirconia: Influence of positioning within blank and sintering conditions on the in vitro performance of 3-unit fixed partial dentures. J Prosthet Dent 2022; 127:141-145. https://doi.org/10.1016/j.prosdent.2020.11.009 PMid:33386137

8. Inokoshi M, Liu H, Yoshihara K, et al. Layer characteristics in strength-gradient multilayered yttria-stabilized zirconia. Dent Mater 2023; 39:430-441. https://doi.org/10.1016/j.dental.2023.03.015 PMid:36914432

9. Badr Z, Culp L, Duqum I, Kois JC. Survivability and fracture resistance of monolithic and multi-yttria-layered zirconia crowns as a function of yttria content: A mastication simulation study. J Esthet Restor Dent 2022; 34:633-640. https://doi.org/10.1111/jerd.12907 PMid:35312154 PMCid:PMC9081244

10. Pereira RM, Campos TMB, Bonfante EA, Thim GP. A comparative study of mechanical properties of yttria stabilized zirconia monolithic and bilayer configuration for dental application. J Mech Behav Biomed Mater 2023; 148:106160. https://doi.org/10.1016/j.jmbbm.2023.106160 PMid:37832171

11. Kaizer MR, Kolakarnprasert N, Rodrigues C, Chai H, Zhang Y. Probing the interfacial strength of novel multi-layer zirconias. Dent Mater 2020; 36:60-67. https://doi.org/10.1016/j.dental.2019.10.008 PMid:31727444 PMCid:PMC6935426

12. Attachoo S, Juntavee N. Role of sintered temperature and sintering time on spectral translucence of nano-crystal monolithic zirconia. J Clin Exp Dent 2019; 11:e146-e153. https://doi.org/10.4317/jced.55497 PMid:30805119 PMCid:PMC6383898

13. Öztürk C, Can G. Effect of Sintering Parameters on the Mechanical Properties of Monolithic Zirconia. J Dent Res Dent Clin Dent Prospects 2019; 13:247-252. https://doi.org/10.15171/joddd.2019.038 PMid:32190207 PMCid:PMC7072090

14. Cardoso KV, Adabo GL, Mariscal-Muñoz E, Fonseca RG, Pecho OE, Ghinea R. Effect of sintering temperature on microstructure, flexural strength, and optical properties of a fully stabilized monolithic zirconia. J Prosthet Dent 2020; 124:594-598. https://doi.org/10.1016/j.prosdent.2019.08.007 PMid:31862144

15. Kauling AE, Güth JF, Erdelt K, Edelhoff D, Keul C. Influence of speed sintering on the fit and fracture strength of 3-unit monolithic zirconia fixed partial dentures. J Prosthet Dent 2020; 124:380-386. https://doi.org/10.1016/j.prosdent.2019.09.003 PMid:31780110

16. Alshahrani AM, Lim CH, Kim J, Zhang Y. Transient thermal stresses developed during speed sintering of 3 mol% yttria-stabilized tetragonal zirconia polycrystals. Dent Mater 2023; 39:522-528. https://doi.org/10.1016/j.dental.2023.04.004 PMid:37045719 PMCid:PMC10168597

17. Madruga CFL, Dal Piva AMO, Pereira GKR, Campos F, Ozcan M, Bottino MA. Sintering mode of a translucent Y-TZP: Effects on its biaxial flexure fatigue strength, surface morphology and translucency. J Esthet Restor Dent 2022; 34:1197-1205. https://doi.org/10.1111/jerd.12923 PMid:35560703 PMCid:PMC9790507

18. Ahmed WM, Troczynski T, Stojkova BJ, McCullagh AP, Wyatt CCL. Dimensional Changes of Yttria-stabilized Zirconia under Different Preparation Designs and Sintering Protocols. J Prosthodont 2020; 29:699-706. https://doi.org/10.1111/jopr.13170 PMid:32237048

19. Lubauer J, Schuenemann FH, Belli R, Lohbauer U. Speed-sintering and the mechanical properties of 3-5 mol% Y2O3-stabilized zirconias. Odontology 2023; 111:883-890. https://doi.org/10.1007/s10266-023-00796-y PMid:36859729 PMCid:PMC10492746

20. Kongkiatkamon S, Peampring C. Comparison of Regular and Speed Sintering on Low-Temperature Degradation and Fatigue Resistance of Translucent Zirconia Crowns for Implants: An In Vitro Study. J Funct Biomater 2022; 13:281. https://doi.org/10.3390/jfb13040281 PMid:36547541 PMCid:PMC9785840

21. Ahmed WM, Abdallah MN, McCullagh AP, Wyatt CCL, Carvalho RM. Marginal Discrepancies of Monolithic Zirconia Crowns: The Influence of Preparation Designs and Sintering Techniques. J Prosthodont 2019; 28:288-298. https://doi.org/10.1111/jopr.13021 PMid:30656786

22. Michailova M, Elsayed A, Fabel G, Edelhoff D, Zylla IM, Stawarczyk B. Comparison between novel strength-gradient and color-gradient multilayered zirconia using conventional and high-speed sintering. J Mech Behav Biomed Mater 2020; 111:103977. https://doi.org/10.1016/j.jmbbm.2020.103977 PMid:32799133

23. Guilardi LF, Werner A, de Jager N, et al. The influence of roughness on the resistance to impact of different CAD/CAM dental ceramics. Braz Dent J 2021; 32:54-65. https://doi.org/10.1590/0103-6440202103951 PMid:35019019

24. de Jager N, Münker TJAG, Guilardi LF, Kleverlaan CJ, Feilzer AJ. The relation between impact strength and flexural strength of dental materials. J Mech Behav Biomed Mater 2021; 122:104658. https://doi.org/10.1016/j.jmbbm.2021.104658 PMid:34214922

25. Lawn B. Fracture of Brittle Solids. 2nd ed. Cambridge: Cambridge University Press; 1993. https://doi.org/10.1017/CBO9780511623127 PMCid:PMC45874

26. Heidari N, Amawi R, Seweryniak P, Jafarzadeh Kashi TS, Heidari B, Heidari S. Fracture Resistance and Fracture Behaviour of Monolithic Multi-Layered Translucent Zirconia Fixed Dental Prostheses with Different Placing Strategies of Connector: An in vitro Study. Clin Cosmet Investig Dent 2022; 14:61-69. https://doi.org/10.2147/CCIDE.S344941 PMid:35345450 PMCid:PMC8957397

27. Li X, Wang Q, Qiu X, Zhao B. Effect of different CAD/CAM cutting depths on the post-fatigue load-bearing capacity of novel multilayer zirconia restorations. J Dent 2021; 111:103709. https://doi.org/10.1016/j.jdent.2021.103709 PMid:34062215

28. Attia MA, Shokry TE. Effect of dynamic loading on fracture resistance of gradient zirconia fixed partial denture frameworks. J Prosthet Dent 2023; 130:242-249. https://doi.org/10.1016/j.prosdent.2021.09.027 PMid:34740458

29. Machry RV, Dapieve KS, Cadore-Rodrigues AC, Pereira GKR, Valandro LF, Burrow MF. Mechanical characterization of a multi-layered zirconia: Flexural strength, hardness, and fracture toughness of the different layers. J Mech Behav Biomed Mater 2022; 135:105455. https://doi.org/10.1016/j.jmbbm.2022.105455 PMid:36148725

30. Vardhaman S, Borba M, Kaizer MR, Kim DK, Zhang Y. Wear behavior and microstructural characterization of translucent multilayer zirconia. Dent Mater 2020; 36:1407-1417. https://doi.org/10.1016/j.dental.2020.08.015 PMid:32958309 PMCid:PMC7969479