Bhat CD, Bhat GS, Sadananda V. Effect of preheating on the degree of conversion, rheological behaviour, and microhardness of resin composites: An in vitro ATR-FTIR and mechanical analysis. J Clin Exp Dent. 2026;18(9):e1060-7.
doi:10.4317/jced.64273
https://doi.org/10.4317/jced.64273
References
|
1. Shen C, Rawls HR, Esquivel-Upshaw JF. Chemical and physical properties of solids. In: Shen C, Rawls HR, Esquivel-Upshaw JF, editors. Phillips' science of dental materials. 13th ed. St. Louis: Elsevier; 2021. |
|
|
2. Anusavice KJ, Shen C, Rawls HR. Phillips' science of dental materials. 12th ed. St. Louis: Saunders; 2013. |
|
|
3. Poubel DLDN, da Silva RC, Ribeiro APD, Garcia FCP. Effect of preheating on the viscosity of composite resins. J Conserv Dent Endod. 2024;27:360-365. |
|
|
4. Daronch M, Rueggeberg FA, Hall G, De Goes MF. Effect of composite temperature on in vitro intrapulpal temperature rise. Dent Mater. 2007;23:1283-1288. |
|
|
5. Lohbauer U, Zinelis S, Rahiotis C, Petschelt A, Eliades G. The effect of resin composite pre-heating on monomer conversion and polymerization shrinkage. Dent Mater. 2009;25:514-519. |
|
|
6. Patussi AFC, Ramacciato JC, da Silva JGR, Nascimento VRP, Campos DES, de Araújo Ferreira Munizz I, de Souza GM, Lima RBW. Preheating of dental composite resins: A scoping review. J Esthet Restor Dent. 2023;35:646-656. |
|
|
7. Dimitriadi M, Petropoulou A, Papathanasiou I, Zinelis S, Eliades G. Modern light-cured restorative composites as luting agents: The effect of preheating on conversion and film thickness. Materials (Basel). 2025;18:3721. |
|
|
8. Balagopal S, Geethapriya N, Anisha S, Hemasathya BA, Vandana J, Dhatshayani C. Comparative evaluation of the degree of conversion of four different composites polymerized using ultrafast photopolymerization technique: An in vitro study. J Conserv Dent Endod. 2021;24:77-82. |
|
|
9. Elkaffas AA, Eltoukhy RI, Elnegoly SA, Mahmoud SH. The effect of preheating resin composites on surface hardness: A systematic review and meta-analysis. Restor Dent Endod. 2019;44:e41. |
|
|
10. Singha A, Dhanesha A, Nair S, Patel R, Behera S, Nanda S. Pre-heating effect on micro-hardness and depth of cure for three bulk-fill composite resins: An in vitro study. Bioinformation. 2024;20:1128-1131. |
|
|
11. Choudhary N, Kamat S, Mangala TM, Thomas M. Effect of pre-heating composite resin on gap formation at three different temperatures. J Conserv Dent. 2011;14:191-195. |
|
|
12. Ranjini MA, Geetha V, Vedavathi B, Ashok HK, Airsang AJ, Swathi S. Comparative evaluation of microleakage in Class II cavities restored with snowplow technique using flowable or preheated packable bulk-fill composite resin as gingival increment by dye extraction method: An in vitro study. J Conserv Dent Endod. 2024;27:1158-1162. |
|
|
13. Hannig M, Bott B. In-vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. Dent Mater. 1999;15:275-281. |
|
|
14. Öztürk B, Üşümez A, Öztürk AN, Ozer F. In vitro assessment of temperature change in the pulp chamber during cavity preparation. J Prosthet Dent. 2004;91:436-440. |
|
|
15. Zach L, Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol. 1965;19:515-530. |
|
|
16. Dionysopoulos D, Papadopoulos C, Koliniotou-Koumpia E. Effect of temperature, curing time, and filler composition on surface microhardness of composite resins. J Conserv Dent. 2015;18:114-118. |
|
|
17. Jin MU, Kim SK. Effect of pre-heating on some physical properties of composite resin. J Korean Acad Conserv Dent. 2009;34:30-37. |
|