de Matos JDM, Sinhoreti MAC, Schneider M, Dobrin R, Queiroz DA. Biomechanical stability and monitoring technologies of implant-supported prosthetic components. J Clin Exp Dent. 2026;18(9):e1103-12.
doi:10.4317/jced.64338
https://doi.org/10.4317/jced.64338
References
|
1. Sakaguchi RL, Borgersen SE. Nonlinear contact analysis of preload in dental implant screws. Int J Oral Maxillofac Implants. 1995;10(3):295-302. |
|
|
2. Setia G, Yousef H, Ehrenberg D, Luke A, Weiner S. The effects of loading on the preload and dimen-sions of the abutment screw for a 3-unit cantilever-fixed prosthesis design. Implant Dent. 2013;22(4):414-21. |
|
|
3. Miao R, Shen R, Zhang S, Xue S. A review of bolt tightening force measurement and loosening detec-tion. Sensors (Basel). 2020;20(11):3165. |
|
|
4. Anusavice KJ, Shen C, Rawls HR. Phillips' science of dental materials. 12th ed. St. Louis: Elsevier; 2013. |
|
|
5. Haack JE, Sakaguchi RL, Sun T, Coffey JP. Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants. 1995;10(5):529-36. |
|
|
6. Guo J, Wang X, Liu Z, Zhou J, Wang L. Acoustic resonance frequency analysis for evaluating prosthetic screw stability in splinted implant-supported fixed dental prostheses: An in vitro study. J Prosthet Dent. 2025;133(2):542.e1-542.e9. |
|
|
7. Wang RF, Kang B, Lang LA, Razzoog ME. The dynamic natures of implant loading. J Prosthet Dent. 2009;101(6):359-71. |
|
|
8. Tan KB, Nicholls JI. Implant-abutment screw joint preload of 7 hex-top abutment systems. Int J Oral Maxillofac Implants. 2001;16(3):367-77. |
|
|
9. Siamos G, Winkler S, Boberick KG. Relationship between implant preload and screw loosening on implant-supported prostheses. J Oral Implantol. 2002;28(2):67-73. |
|
|
10. Szajek K, Wierszycki M. Screw preload loss under occlusal load as a predictor of loosening risk in varying dental implant designs. J Mech Behav Biomed Mater. 2023;148:106165. |
|
|
11. Kong X, Li J. Image registration-based bolt loosening detection of steel joints. Sensors (Basel). 2018;18(4):1000. |
|
|
12. Pineda Allen JC, Ng CT. Nonlinear guided-wave mixing for condition monitoring of bolted joints. Sensors (Basel). 2021;21(15):5093. |
|
|
13. Song G, Li W, Wang B, Ho SC. A review of rock bolt monitoring using smart sensors. Sensors (Ba-sel). 2017;17(4):776. |
|
|
14. Li Y, Wu Y, Gao K, Yang H. Early bolt loosening detection method based on digital image correlation. Sensors (Basel). 2024;24(16):5397. |
|
|
15. Theoharidou A, Petridis HP, Tzannas K, Garefis P. Abutment screw loosening in single-implant resto-rations: A systematic review. Int J Oral Maxillofac Implants. 2008;23(4):681-90. |
|
|
16. Gracis S, Michalakis K, Vigolo P, Vult von Steyern P, Zwahlen M, Sailer I. Internal vs. external con-nections for abutments/reconstructions: A systematic review. Clin Oral Implants Res. 2012;23 Suppl 6:202-16. |
|
|
17. Pardal-Peláez B, Montero J. Preload loss of abutment screws after dynamic fatigue in single implant-supported restorations: A systematic review. J Clin Exp Dent. 2017;9(11):e1355-e1361. |
|
|
18. Pitman J, Van Craenenbroeck M, Glibert M, Christiaens V. Screw loosening in angulation-correcting single implant restorations: A systematic review of in vitro studies. J Prosthet Dent. 2024;132(3):520-527. |
|
|
19. Kano SC, Binon PP, Curtis DA. A classification system to measure the implant-abutment microgap. Int J Oral Maxillofac Implants. 2007;22(6):879-85. |
|
|
20. Tiossi R, Gomes EA, Lapria Faria AC, Silveira Rodrigues RC, Ribeiro RF. Effect of cyclic loading on the vertical microgap of long-span zirconia frameworks supported by 4 or 6 implants. J Prosthet Dent. 2014;112(4):828-33. |
|
|
21. Boynueğri AD, Yalim M, Nemli SK, Ergüder BI, Gökalp P. Effect of different localizations of micro-gap on clinical parameters and inflammatory cytokines in peri-implant crevicular fluid: A prospective comparative study. Clin Oral Investig. 2012;16(2):353-61. |
|
|
22. Mangano C, Mangano F, Piattelli A, Iezzi G, Mangano A, La Colla L. Prospective clinical evaluation of 1920 Morse taper connection implants: Results after 4 years of functional loading. Clin Oral Im-plants Res. 2009;20(3):254-61. |
|
|
23. Omori Y, Lang NP, Botticelli D, Papageorgiou SN, Baba S. Biological and mechanical complications of angulated abutments connected to fixed dental prostheses: A systematic review with meta-analysis. J Oral Rehabil. 2020;47(1):101-111. |
|
|
24. Huynh TC, Nguyen TD, Ho DD, Dang NL, Kim JT. Sensor fault diagnosis for impedance monitoring using a piezoelectric-based smart interface technique. Sensors (Basel). 2020;20(2):510. |
|
|
25. Na WS, Baek J. A review of the piezoelectric electromechanical impedance based structural health monitoring technique for engineering structures. Sensors (Basel). 2018;18(5):1307. |
|
|
26. Goodacre CJ, Bernal G, Rungcharassaeng K, Kan JY. Clinical complications with implants and implant prostheses. J Prosthet Dent. 2003;90(2):121-32. |
|
|
27. Binon PP. The effect of implant/abutment hexagonal misfit on screw joint stability. Int J Prosthodont. 1996;9(2):149-60. |
|
|
28. Schwarz MS. Mechanical complications of dental implants. Clin Oral Implants Res. 2000;11 Suppl 1:156-8. |
|
|
29. Mohammed HH, Lee JH, Bae JM, Cho HW. Effect of abutment screw length and cyclic loading on removal torque in external and internal hex implants. J Adv Prosthodont. 2016;8(1):62-9. |
|
|
30. Jörnéus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants. 1992;7(3):353-9. |
|
|
31. Lasheras FS, Rodríguez JG, Quevedo MM, Fernández EM, Bascarán JB, Lanchares HL, Arenal ÁÁ. Does the transversal screw design increase the risk of mechanical complications in dental implants? A finite element analysis. Int J Numer Method Biomed Eng. 2019;35(6):e3205. |
|
|
32. Bishti S, Alsagher MSE, Homa M, Wolfart S, Tuna T. Factors influencing the screw stability of implant-supported single crowns: an in vitro study. Materials (Basel). 2025;18(3):506. |
|
|
33. Huo L, Cheng H, Kong Q, Chen X. Bond-slip monitoring of concrete structures using smart sensors: a review. Sensors (Basel). 2019;19(5):1231. |
|
|
34. Revathi A, Borrás AD, Muñoz AI, Richard C, Manivasagam G. Degradation mechanisms and future challenges of titanium and its alloys for dental implant applications in oral environment. Mater Sci Eng C Mater Biol Appl. 2017;76:1354-1368. |
|
|
35. Aydin AC, Çelebi O. Piezoelectric materials in civil engineering applications: a review. ACS Omega. 2023;8(22):19168-19193. |
|