Solá-Ruíz MF, Selva-Otaolaurruchi E, Senent-Vicente G, González-de-Cossio I, Amigó-Borrás V. Accuracy
combining different brands of implants and abutments. Med
Oral Patol Oral Cir Bucal.
2013 Mar 1;18 (2):e332-6.
doi:10.4317/medoral.18137
http://dx.doi.org/doi:10.4317/medoral.18137
|
1. Jansen VK, Conrads G, Richter EJ.
Microbial leakage and marginal fit of the implant-abutment interface. Int J Oral Maxillofac Implants. 1997;12:527-40. |
|
|
|
|
|
2. Vidigal GM Jr, Novaes AB Jr, Chevitarese O, de Avillez RR, Groisman M. Evaluation of the implant-connection
interface using scanning electron microscopy. Braz Dent J. 1995;6:17-23. |
|
|
|
|
|
3. Al-Turki LE, Chai
J, Lautenschlager EP, Hutten MC. Changes in
prosthetic screw stability because of misfit of implant-supported prostheses.
Int J Prothodont. 2002;15:38-42. |
|
|
|
|
|
4. Jemt T, Book K. Prosthesis misfit and
marginal bone loss in edentulous implant patients. Int J
Oral Maxillofac Implants.
1996;11:620-5. |
|
|
|
|
|
5. Garine WN, Funkenbusch
PD, Ercoli C, Wodenscheck
J, Murphy WC. Measurement of the rotational misfit and implant-abutment gap
of all-ceramic abutments. Int J Oral Maxillofac Implants. 2007;22:928-38. |
|
|
|
|
|
6. Binon PP. Evaluation of machining
accuracy and consistency of selected implants, standard abutments, and
laboratory analogs. Int J Prosthodont. 1995;8:162-78. |
|
|
|
|
|
7. Alves da Cunha TdeM, Correia
de Araújo RP, Barbosa da Rocha PV, Pazos Amoedo RM. Comparison of fit accuracy between Procera custom abutments and three implant systems. Clin Implant Dent Relat Res.
2012;14:772-7. |
|
|
|
|
|
8. Schulte JK. External hex manufacturing tolerances of six implant
systems: A pilot study. Implant Dent 1994;3:51-3. |
|
|
|
|
|
9. Binon PP. The effect of implant/abutment
hexagonal misfit on screw joint stability. Int J Prosthodont. 1996;9:149-60. |
|
|
|
|
|
10. Jokstad A, Braegger
U, Brunski JB, Carr AB, Naert
I, Wennerberg A. Quality of dental implants. Int Dent J. 2003;53:409-43. |
|
|
|
|
|
11. Kano
SC, Bonfante G, Hussne R,
Siqueira AF. Use of base metal casting
alloys for implant framework: marginal accuracy analysis. J Appl Oral Sci. 2004;12:337-43. |
|
|
|
|
|
12. Byrne D, Houston F, Cleary R, Claffey N.
The fit of cast and premachined implant abutments. J Prosthet Dent. 1998;80:184-92. |
|
|
|
|
|
13. Grunder U, Spielmann
HP, Snétivy D. Development, in vitro testing, and
clinical use of a 3.5mm-diameter zirconia abutment.
Eur J Esthet Dent. 2010;5:158-70. |
|
|
|
|
|
14. Boeckler AF, Morton D, Kraemer S, Geiss-Gerstdorfer J, Setz JM.
Marginal accuracy of combined tooth-implant-supported fixed dental prostheses
after in vitro stress simulation. Clin Oral
Implants Res. 2008;19:1261-9. |
|
|
|
|
|
15. Kano SC, Curtis DA, Binon PP, Bonfante G. Effect of casting procedures on screw
loosening in UCLA-Type abutments. J Prosthodont.
2006;15:77-81. |
|
|
|
|
|
16. Holmes JR, Bayne SC, Holland GA, Sulik
WD. Considerations in measurement of marginal fit. J Prosthet Dent. 1989;62:405-8. |
|
|
|
|
|
17. Kano
SC, Binon PP, Curtis DA. A classification system to
measure the implant-abutment microgap. Int J Oral Maxyllofac Implants. 2007;22:879-85. |
|
|
|
|
|
18. Tsuge T, Hagiwara Y, Matsumura H.
Marginal fit and microgaps of implant-abutment
interface with internal anti-rotation configuration. Dent Mater J. 2008;27:29-34. |
|
|
|
|
|
19. Gross M, Kozak D, Laufer
BZ, Weiss EI. Manual closing torque in five implant abutment systems: an in
vitro comparative study. J Prosthet Dent. 1999;81:574-8. |
|
|
|
|
|
20. Gross M, Abramovich I, Weiss EI. Microleakage at the
abutment-implant interface of osseointegrated
implants: a comparative study. Int J
Oral Maxillofac Implants.
1999;14:94-100. |
|