Slavcheva S, Krejci I, Bortolotto
T. Luting of ceramic crowns with a
self-adhesive cement: Effect of contamination on marginal adaptation and
fracture strength. Med
Oral Patol Oral Cir Bucal.
2013 Sep 1;18 (5):e799-803.
doi:10.4317/medoral.18544
http://dx.doi.org/doi:10.4317/medoral.18544
|
1. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B.
Bonding of an auto-adhesive luting material to
enamel and dentin. Dent Mater. 2004;20:963-71. |
|
|
|
|
|
2. Nakamura T, Wakabayashi K, Kinuta S,
Nishida H, Miyamae M, Yatani H. Mechanical
properties of new self-adhesive resin-based cement. J Prosthodont
Res. 2010;54:59-64. |
|
|
|
|
|
3. Abo-Hamar SE, Hiller KA, Jung H, Federlin M, Friedl KH, Schmalz G. Bond strength of a new universal self-adhesive
resin luting cement to dentin and enamel. Clin Oral Investig. 2005;9:161-7. |
|
|
|
|
|
4. Goracci C, Cury
AH, Cantoro A, Papacchini
F, Tay FR, Ferrari M. Microtensile
bond strength and interfacial properties of self-etching and self-adhesive
resin cements used to lute composite onlays under
different seating forces. J Adhes Dent. 2006;8:327-35. |
|
|
|
|
|
5. Hikita
K, Van Meerbeek B, De Munck
J, Ikeda T, Van Landuyt
K, Maida T, et al. Bonding effectiveness of
adhesive luting agents to enamel and dentin. Dent Mater. 2007;23:71-80. |
|
|
|
|
|
6. Fabianelli A, Goracci
C, Bertelli E, Monticelli
F, Grandini S, Ferrari M. In vitro evaluation of
wall-to-wall adaptation of a self-adhesive cement
used for luting gold and ceramic inlays. J Adhes Dent. 2005;7:33-40. |
|
|
|
|
|
7. Kaaden C, Powers JM, Friedl
KH, Schmalz G. Bond strength of self-etching
adhesives to dental hard tissues. Clin
Oral Investig. 2002;6:155-60. |
|
|
|
|
|
8. Chung CW, Yiu CK, King NM, Hiraishi N, Tay
FR. Effect of saliva contamination on bond strength of resin luting cements to dentin. J Dent. 2009;37:923-31. |
|
|
|
|
|
9. Al-Assaf K, Chakmakchi
M, Palaghias G, Karanika-Kouma
A, Eliades G. Interfacial characteristics of
adhesive luting resins and composites with dentine.
Dent Mater. 2007;23:829-39. |
|
|
|
|
|
10. Mörmann W, Wolf D, Ender A, Bindl A, Göhring T, Attin T. Effect of two self-adhesive cements on marginal
adaptation and strength of esthetic ceramic CAD/CAM molar crowns. J Prosthodont. 2009;18:403-10. |
|
|
|
|
|
11. Behr M, Rosentritt M, Regnet T, Lang R, Handel G. Marginal adaptation in dentin
of a self-adhesive universal resin cement compared with well-tried systems. Dent Mater. 2004;20:191-7. |
|
|
|
|
|
12. Behr M, Hansmann M, Rosentritt
M, Handel G. Marginal adaptation of three self-adhesive resin cements vs. a
well-tried adhesive luting agent. Clin Oral Investig. 2009;13:459-64. |
|
|
|
|
|
13. Sailer I, Oendra
AE, Stawarczyk B, Hämmerle
CH. The effects of desensitizing resin, resin sealing, and provisional cement
on the bond strength of dentin luted with
self-adhesive and conventional resincements. J Prosthet Dent. 2012;107:252-60. |
|
|
|
|
|
14. Bagis B, Bagis
YH, Hasanreisoglu U. Bonding effectiveness of a self-adhesive resin-based luting
cement to dentin after provisional cement contamination. J Adhes Dent. 2011;13:543-50. |
|
|
|
|
|
15. Mohammadi N, Kimyai
S, Bahari M, Pournaghi-Azar
F, Mozafari A. Effect of aluminium
chloride hemostatic agent on microleakage
of class V composite resin restorations bonded with all-in-one adhesive. Med
Oral Patol Oral Cir Bucal.
2012;17:e841-4. |
|
|
|
|
|
16. Bindl A, Lüthy
H, Mörmann WH. Thin-wall ceramic CAD/CAM crown
copings: strength and fracture pattern. J
Oral Rehabil. 2006;33:520-8. |
|
|
|
|
|
17. Lefever D, Gregor
L, Bortolotto T, Krejci
I. Supragingival relocation of subgingivally
located margins for adhesive inlays/onlays with
different materials. J Adhes Dent. 2012;14:561-7. |
|
|
|
|
|
18. Roggendorf MJ, Krämer
N, Dippold C, Vosen VE, Naumann M, Jablonski-Momeni A,
et al. Effect of proximal box elevation with resin composite on marginal
quality of resin composite inlays in vitro. J Dent. 2012;40:1068-73. |
|
|
|
|
|
19. Kuphasuk W, Harnirattisai
C, Senawongse P, Tagami
J. Bond strength of two adhesive systems to dentin contaminated with a hemostatic agent. Oper Dent. 2007;32:399-405. |
|
|
|
|
|
20. Cheong C, King NM, Pashley DH, Ferrari
M, Toledano M, Tay FR. Incompatibility of self-etch adhesives with
chemical/dual cured composites: two-step vs
one-step systems. Oper Dent. 2003;28:747-55. |
|
|
|
|
|
21. Viotti
RG, Kasaz A, Pena CE, Alexandre RS, Arrais CA, Reis AF. Microtensile bond strength of
new self-adhesive luting agents and conventional
multistep systems. J Prosthet Dent. 2009;102:306-12. |
|
|
|
|
|
22. Sidhu SK, Watson TF. Interfacial
characteristics of resin-modified glass-ionomer
materials: a study on fluid permeability using confocal
fluorescence microscopy. J Dent Res. 1998;77:1749-59. |
|
|
|
|
|
23. Tay FR, Sidhu
SK, Watson TF, Pashley DH. Water-dependent
interfacial transition zone in resin-modified glass-ionomer
cement/dentin interfaces. J Dent Res. 2004;83:644-9. |
|
|
|
|
|
24. Reddy L, Marker VA, Ellis E. Bond strength for orthodontic
brackets contaminated by blood: Composite versus resin-modified glass-ionomer cements. J
Oral Maxillofac Surg.
2003;61:206-13. |
|
|
|
|
|
25. Bindl A, Lüthy
H, Mörmann WH. Strength and fracture pattern of
monolithic CAD/CAM-generted posterior crowns. Dent Mater. 2006;22:29-36. |
|
|
|
|
|
26. Sornsuwan T, Swain MV. The effect of
marginal thickness, degree of convergence and bonding interlayer on the
marginal failure of glass-simulated all-ceramic crowns. Acta Biomater. 2012;8:4426-37. |
|
|
|
|
|
27. Rosenstiel SF, Gupta PK, Van der Sluys RA, Zimmerman MH.
Strength of a dental glass-ceramic after surface coating. Dent Mater. 1993;9:274-9. |
|
|
|
|
|
28. Fleming GJ, Narayan O. The effect of
cement type and mixing on the bi-axial fracture strength of cemented
aluminous core porcelain discs. Dent
Mater. 2003;19:69-76. |
|
|
|
|