Espinar-Escalona
E, Llamas-Carreras JM, Barrera-Mora JM, Abalos-Lasbrucci
C, Gil-Mur FJ. Effect of temperature on the orthodontic clinical applications of niti closed-coil springs. Med Oral Patol
Oral Cir Bucal. 2013 Jul 1;18 (4):e721-4.
doi:10.4317/medoral.19073
http://dx.doi.org/doi:10.4317/medoral.19073
|
1. Idelsohn S, Pe-a
J, Lacroix D, Planell JA,
Gil FJ, Arcas A. Continuous mandibular
distraction osteogenesis using superelastic
shape memory alloy (SMA). J Mater Sci Mater Med.
2004;15:541-6. |
|
|
|
|
|
2. Suárez C, Vilar
T, Gil J, Sevilla P. In vitro evaluation of surface
topographic changes and nickel release of lingual orthodontic archwires. J Mater Sci Mater
Med. 2010; 21:675-83. |
|
|
|
|
|
3. Espinar E, Llamas J.M, Michiardi A, Ginebra M.P, Gil
F.J. Reduction of Ni release and improvement of the friction behavior of NiTi orthodontic archwires by
oxidation treatments. J Mater Sci Mater Med. 2011;22 :1119-25. |
|
|
|
|
|
4. Brantley WA, Iijima M, Grentzer TH. Temperature modulated DSC provides new
insight about nickel-titanium wire transformations. Am J Orthod
Dentofac Orthop. 2003;124:387-94. |
|
|
|
|
|
5 Sfondrini
MF, Cacciafesta V, Maffia
E, Scribante A, Alberti G, Biesuz
R, et al. Nickel release from new conventional stainless steel, recycled, and
nickel-free orthodontic brackets: An in vitro study. Am J Orthod
Dentofacial Orthop. 2010;137:809-15. |
|
|
|
|
|
6. Hunt NP, Cunningham SJ, Golden CG, Sheriff M. An investigation into
the effects of polishing on surface hardness and corrosion of orthodontic archwires. Angle Orthod. 1999;69:433-40. |
|
|
|
|
|
7. Edie JW, Andreasen GF, Zaytoun MP. Surface corrosion of nitinol
and stainless steel under clinical conditions. Angle Orthod. 1981;51:319-24. |
|
|
|
|
|
8. Michiardi
A, Aparicio C, Planell JA, Gil FJ. New oxidation
treatment of NiTi shape memory alloys to obtain
Ni-free surfaces and to improve biocompatibility. J Biomed Mater Res B Appl Biomater. 2006;77:249-56. |
|
|
|
|
|
9. Barrabés M, Michiardi
A, Aparicio C, Sevilla P,
Planell J.A, Gil F.J. Oxidized nickel-titanium
foams for bone reconstructions: chemical and mechanical
characterization" J Mater Sci Mater Med.
2007;18:2123-9. |
|
|
|
|
|
10. Speck KM, Fraker AC. Anodic polarization
behavior of Ti-Ni and Ti-6A1-4V in simulated physiological solutions. J Dent Res. 1980;59:1590-5. |
|
|
|
|
|
11. Andreasen G.F., Morrow R.E. Laboratory
and clinical analysis of Nitinol wire. Am. J. Orthod. 1978;73:142-5. |
|
|
|
|
|
12. Fischer-Brandies H, Es-Souni M, Kock N, Raetzke K, Bock O.
Transformation behavior, chemical composition, surface topography and bending
properties of five selected 0.016"x0.022" NiTi
archwires. J Orofac Orthop. 2003;64:88-99. |
|
|
|
|
|
13. Es-Souni M, Es-Souni
M, Fischer-Brandies H. On the properties of two binary NiTi
shape memory alloys. Effects of surface finish on the corrosion behaviour and in vitro biocompatibility. Biomaterials. 2002;23:2887-94. |
|
|
|
|
|
14. Wichelhaus A, Geserick
M, Hibst R, Sander FG. The effect of surface
treatment and clinical use on friction in NiTi
orthodontic wires. Dent Mater. 2005;21:938-45. |
|
|
|
|
|
15. Oshida Y, Sachdeva
RC, Miyazaki S. Microanalytical characterization
and surface modification of TiNi orthodontic archwires. Biomed
Mater Eng. 1992;2:51-69. |
|
|
|
|
|
16. Trepanier C, Tabrizian
M, Yahia LH, Bilodeau L, Piron DL. Effect of modification of oxide layer on NiTi stent corrosion resistance. J Biomed Mater Res. 1998;43:433-40. |
|
|
|
|
|
17. Nakagawa M, Matsuya S, Shiraishi T, Ohta M. Effect of fluoride concentration and pH on
corrosion behavior of titanium for dental use. J Dent Res. 1999;78:1568-72. |
|
|
|
|
|
18. Hunt NP, Cunningham SJ, Golden CG, Sheriff M. An investigation
into the effects of polishing on surface hardness and corrosion of
orthodontic archwires. Angle Orthod. 1999;69:433-40. |
|
|
|
|
|
19. Huang HH. Surface characterizations and corrosion resistance of
nickel-titanium orthodontic archwires in artificial
saliva of various degrees of acidity. J Biomed Mater Res A. 2005;74:629-39. |
|
|
|
|
|
20. Grimsdottir MR, Hensten-Pettersen
A. Surface analysis of nickel-titanium archwire
used in vivo. Dent Mater. 1997;13:163-7. |
|
|
|
|
|
21. Eliades T, Eliades
G, Athanasiou AE, Bradley TG. Surface
characterization of retrieved NiTi orthodontic archwires. Eur J Orthod. 2000;22:317-26. |
|