|
1. Coelho PG, Granjeiro JM, Romanos GE, Suzuki M, Silva NR,
Cardaropoli G, et al. Basic research methods and current trends of dental
implant surfaces. Journal of biomedical materials research Part B,
Applied biomaterials. 2009;88:579-96.
http://dx.doi.org/10.1002/jbm.b.31264
|
|
|
|
2. Jimbo R, Ono D, Hirakawa Y, Odatsu T, Tanaka T, Sawase T.
Accelerated photo-induced hydrophilicity promotes osseointegration: an
animal study. Clinical implant dentistry and related research.
2011;13:79-85.
http://dx.doi.org/10.1111/j.1708-8208.2009.00179.x
|
|
|
|
|
3. Jimbo R, Sawase T, Baba K, Kurogi T, Shibata Y, Atsuta M.
Enhanced initial cell responses to chemically modified anodized titanium.
Clinical implant dentistry and related research. 2008;10:55-61.
http://dx.doi.org/10.1111/j.1708-8208.2007.00061.x
|
|
|
|
|
4. Albrektsson T, Gottlow J, Meirelles L, Ostman PO, Rocci
A, Sennerby L. Survival of NobelDirect implants: an analysis of 550
consecutively placed implants at 18 different clinical centers. Clinical
implant dentistry and related research. 2007;9:65-70.
http://dx.doi.org/10.1111/j.1708-8208.2007.00054.x
|
|
|
|
|
5. Albrektsson T, Wennerberg A. Oral implant surfaces: Part
1--review focusing on topographic and chemical properties of different
surfaces and in vivo responses to them. The International journal of
prosthodontics. 2004;17:536-43.
|
|
|
|
|
6. Albrektsson T, Wennerberg A. Oral implant surfaces: Part
2--review focusing on clinical knowledge of different surfaces. The
International journal of prosthodontics. 2004;17:544-64.
|
|
|
|
|
7. Coelho PG, Granato R, Marin C, Teixeira HS, Suzuki M,
Valverde GB, et al. The effect of different implant macrogeometries and
surface treatment in early biomechanical fixation: an experimental study
in dogs. Journal of the mechanical behavior of biomedical materials.
2011;4:1974-81.
http://dx.doi.org/10.1016/j.jmbbm.2011.06.016
|
|
|
|
|
8. Jimbo R, Sawase T, Shibata Y, Hirata K, Hishikawa Y,
Tanaka Y, et al. Enhanced osseointegration by the chemotactic activity of
plasma fibronectin for cellular fibronectin positive cells. Biomaterials.
2007;28:3469-77.
http://dx.doi.org/10.1016/j.biomaterials.2007.04.029
|
|
|
|
|
9. Yoo D, Tovar N, Jimbo R, Marin C, Anchieta RB, Machado
LS, et al. Increased osseointegration effect of bone morphogenetic
protein 2 on dental implants: an in vivo study. J Biomed Mater Res A.
2014;102:1921-7.
http://dx.doi.org/10.1002/jbm.a.34862
|
|
|
|
|
10. Wennerberg A, Albrektsson T. On implant surfaces: a
review of current knowledge and opinions. The International journal of
oral & maxillofacial implants. 2010;25:63-74.
|
|
|
|
|
11. Bonfante EA, Witek L, Tovar N, Suzuki M, Marin C,
Granato R, et al. Physicochemical Characterization and In Vivo Evaluation
of Amorphous and Partially Crystalline Calcium Phosphate Coatings
Fabricated on Ti-6Al-4V Implants by the Plasma Spray Method.
International journal of biomaterials. 2012;2012:603826.
http://dx.doi.org/10.1155/2012/603826
|
|
|
|
|
12. Coelho PG, Granato R, Marin C, Jimbo R, Lin S, Witek L,
et al. Effect of Si addition on Ca- and P-impregnated implant surfaces
with nanometer-scale roughness: an experimental study in dogs. Clinical
oral implants research. 2012;23:373-8.
http://dx.doi.org/10.1111/j.1600-0501.2010.02150.x
|
|
|
|
|
13. Balla VK, Bodhak S, Bose S, Bandyopadhyay A. Porous
tantalum structures for bone implants: fabrication, mechanical and in
vitro biological properties. Acta biomaterialia. 2010;6:3349-59.
http://dx.doi.org/10.1016/j.actbio.2010.01.046
|
|
|
|
|
14. Goodridge RD, Wood DJ, Ohtsuki C, Dalgarno KW.
Biological evaluation of an apatite-mullite glass-ceramic produced via
selective laser sintering. Acta biomaterialia. 2007;3:221-31.
http://dx.doi.org/10.1016/j.actbio.2006.10.005
|
|
|
|
|
15. Porter NL, Pilliar RM, Grynpas MD. Fabrication of porous
calcium polyphosphate implants by solid freeform fabrication: a study of
processing parameters and in vitro degradation characteristics. J Biomed
Mater Res. 2001;56:504-15.
http://dx.doi.org/10.1002/1097-4636(20010915)56:4<504::AID-JBM1122>3.0.CO;2-J
|
|
|
|
|
16. Chua CK, Leong KF, Tan KH, Wiria FE, Cheah CM.
Development of tissue scaffolds using selective laser sintering of
polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint
defects. Journal of materials science Materials in medicine.
2004;15:1113-21.
http://dx.doi.org/10.1023/B:JMSM.0000046393.81449.a5
|
|
|
|
|
17. Li JP, de Wijn JR, Van Blitterswijk CA, de Groot K.
Porous Ti6Al4V scaffold directly fabricating by rapid prototyping:
preparation and in vitro experiment. Biomaterials. 2006;27:1223-35.
http://dx.doi.org/10.1016/j.biomaterials.2005.08.033
|
|
|
|
|
18. Williams JM, Adewunmi A, Schek RM, Flanagan CL,
Krebsbach PH, Feinberg SE, et al. Bone tissue engineering using
polycaprolactone scaffolds fabricated via selective laser sintering.
Biomaterials. 2005;26:4817-27.
http://dx.doi.org/10.1016/j.biomaterials.2004.11.057
|
|
|
|
|
19. Witek L, Marin C, Granato R, Bonfante EA, Campos F,
Bisinotto J, et al. Characterization and in vivo evaluation of laser
sintered dental endosseous implants in dogs. Journal of biomedical
materials research Part B, Applied biomaterials. 2012;100:1566-73.
http://dx.doi.org/10.1002/jbm.b.32725
|
|
|
|
|
20. Jimbo R, Anchieta R, Baldassarri M, Granato R, Marin C,
Teixeira HS, et al. Histomorphometry and bone mechanical property
evolution around different implant systems at early healing stages: an
experimental study in dogs. Implant dentistry. 2013;22:596-603.
http://dx.doi.org/10.1097/ID.0b013e31829f1f4b
|
|
|
|
|
21. Donath K, Breuner G. A method for the study of
undecalcified bones and teeth with attached soft tissues. The
Sage-Schliff (sawing and grinding) technique. Journal of oral pathology.
1982;11:318-26.
http://dx.doi.org/10.1111/j.1600-0714.1982.tb00172.x
|
|
|
|
|
22. Coelho PG, Cardaropoli G, Suzuki M, Lemons JE. Early
healing of nanothickness bioceramic coatings on dental implants. An
experimental study in dogs. Journal of biomedical materials research Part
B, Applied biomaterials. 2009;88:387-93.
http://dx.doi.org/10.1002/jbm.b.31090
|
|
|
|
|
23. Coelho PG, Marin C, Granato R, Suzuki M. Clinical
Device-Related Article Histomorphologic Analysis of 30 Plateau Root Form
Implants Retrieved After 8 to 13 Years in Function. A Human Retrieval
Study. J Biomed Mater Res B. 2009;91B:975-9.
http://dx.doi.org/10.1002/jbm.b.31455
|
|
|
|
|
24. Coelho PG, Suzuki M, Guimaraes MV, Marin C, Granato R,
Gil JN, et al. Early bone healing around different implant bulk designs
and surgical techniques: A study in dogs. Clinical implant dentistry and
related research. 2010;12:202-8.
|
|
|
|
|
25. Ehrenfest DMD, Coelho PG, Kang BS, Sul YT, Albrektsson
T. Classification of osseointegrated implant surfaces: materials,
chemistry and topography. Trends Biotechnol. 2010;28:198-206.
http://dx.doi.org/10.1016/j.tibtech.2009.12.003
|
|
|
|
|
26. Granato R, Marin C, Suzuki M, Gil JN, Janal MN, Coelho
PG. Biomechanical and histomorphometric evaluation of a thin ion beam
bioceramic deposition on plateau root form implants: an experimental
study in dogs. J Biomed Mater Res B Appl Biomater. 2009;90:396-403.
http://dx.doi.org/10.1002/jbm.b.31298
|
|
|
|
|
27. Kang BS, Sul YT, Oh SJ, Lee HJ, Albrektsson T. XPS, AES
and SEM analysis of recent dental implants. Acta biomaterialia.
2009;5:2222-9.
http://dx.doi.org/10.1016/j.actbio.2009.01.049
|
|
|
|
|
28. Marin C, Granato R, Suzuki M, Gil JN, Piattelli A,
Coelho PG. Removal torque and histomorphometric evaluation of bioceramic
grit-blasted/acid-etched and dual acid-etched implant surfaces: an
experimental study in dogs. Journal of periodontology. 2008;79:1942-9.
http://dx.doi.org/10.1902/jop.2008.080106
|
|
|
|
|
29. Mendes VC, Moineddin R, Davies JE. The effect of
discrete calcium phosphate nanocrystals on bone-bonding to titanium
surfaces. Biomaterials. 2007;28:4748-55.
http://dx.doi.org/10.1016/j.biomaterials.2007.07.020
|
|
|
|
|
30. Mendes VC, Moineddin R, Davies JE. Discrete calcium
phosphate nanocrystalline deposition enhances osteoconduction on
titanium-based implant surfaces. Journal of biomedical materials research
Part A. 2009;90:577-85.
http://dx.doi.org/10.1002/jbm.a.32126
|
|
|
|
|
31. Coelho PG, Lemons JE. Physico/chemical characterization
and in vivo evaluation of nanothickness bioceramic depositions on
alumina-blasted/acid-etched Ti-6Al-4V implant surfaces. Journal of
biomedical materials research Part A. 2009;90:351-61.
http://dx.doi.org/10.1002/jbm.a.32097
|
|
|
|
|
32. Wennerberg A, Albrektsson T. Effects of titanium surface
topography on bone integration: a systematic review. Clinical oral
implants research. 2009;20Suppl 4:172-84.
http://dx.doi.org/10.1111/j.1600-0501.2009.01775.x
|
|
|
|
|
33. Mangano C, De Rosa A, Desiderio V, d'Aquino R, Piattelli
A, De Francesco F, et al. The osteoblastic differentiation of dental pulp
stem cells and bone formation on different titanium surface textures.
Biomaterials. 2010;31:3543-51.
http://dx.doi.org/10.1016/j.biomaterials.2010.01.056
|
|
|
|
|
34. Mangano C, Mangano F, Shibli JA, Luongo G, De Franco M,
Briguglio F, et al. Prospective clinical evaluation of 201 direct laser
metal forming implants: results from a 1-year multicenter study. Lasers
in medical science. 2012;27:181-9.
http://dx.doi.org/10.1007/s10103-011-0904-3
|
|
|
|
|
35. Mangano C, Piattelli A, Raspanti M, Mangano F, Cassoni
A, Iezzi G, et al. Scanning electron microscopy (SEM) and X-ray
dispersive spectrometry evaluation of direct laser metal sintering
surface and human bone interface: a case series. Lasers in medical
science. 2011;26:133-8.
http://dx.doi.org/10.1007/s10103-010-0831-8
|
|
|
|
|
36. Shibli JA, Mangano C, D'Avila S, Piattelli A, Pecora GE,
Mangano F, et al. Influence of direct laser fabrication implant
topography on type IV bone: a histomorphometric study in humans. Journal
of biomedical materials research Part A. 2010;93:607-14.
|
|
|
|
|
37. Traini T, Mangano C, Sammons RL, Mangano F, Macchi A,
Piattelli A. Direct laser metal sintering as a new approach to
fabrication of an isoelastic functionally graded material for manufacture
of porous titanium dental implants. Dental materials : official
publication of the Academy of Dental Materials. 2008;24:1525-33.
http://dx.doi.org/10.1016/j.dental.2008.03.029
|
|
|
|
|
38. Wennerberg A, Albrektsson T. Structural influence from
calcium phosphate coatings and its possible effect on enhanced bone
integration. Acta odontologica Scandinavica. 2009;67:333-40.
http://dx.doi.org/10.1080/00016350903188325
|
|
|
|
|
39. Hollander DA, von Walter M, Wirtz T, Sellei R,
Schmidt-Rohlfing B, Paar O, et al. Structural, mechanical and in vitro
characterization of individually structured Ti-6Al-4V produced by direct
laser forming. Biomaterials. 2006;27:955-63.
http://dx.doi.org/10.1016/j.biomaterials.2005.07.041
|
|
|
|
|
40. Marin C, Bonfante EA, Jeong R, Granato R, Giro G, Suzuki
M, et al. Histologic and Biomechanical Evaluation of Two Resorbable
Blasting Media (RBM) Implant Surfaces at Early Implantation Times. The
Journal of oral implantology. 2013;39:445-53.
http://dx.doi.org/10.1563/AAID-JOI-D-10-00156
|
|
|
|
|
41. Baldassarri M, Bonfante E, Suzuki M, Marin C, Granato R,
Tovar N, et al. Mechanical properties of human bone surrounding plateau
root form implants retrieved after 0.3-24 years of function. Journal of
biomedical materials research Part B, Applied biomaterials.
2012;100:2015-21.
http://dx.doi.org/10.1002/jbm.b.32786
|
|
|
|
|
42. Coelho PG, Freire JN, Granato R, Marin C, Bonfante EA,
Gil JN, et al. Bone mineral apposition rates at early implantation times
around differently prepared titanium surfaces: a study in beagle dogs.
The International journal of oral & maxillofacial implants.
2011;26:63-9.
|
|
|
|
|
43. Bloebaum RD, Ota DT, Skedros JG, Mantas JP. Comparison
of human and canine external femoral morphologies in the context of total
hip replacement. Journal of biomedical materials research.
1993;27:1149-59.
http://dx.doi.org/10.1002/jbm.820270905
|
|
|
|