Moya-Martínez T, Jorba-García A, Lobos-Grimaldi S, Valdés-Berrizbeitia I, Bara-Casaus J, Figueiredo R, Valmaseda-Castellón E. Drill irrigation during in vitro drilling with three static computer-assisted implant surgery systems. Med Oral Patol Oral Cir Bucal. 2026 May 1;31 (3):e356-62.
doi:10.4317/medoral.27560
https://dx.doi.org/doi:10.4317/medoral.27560
1.
Jorba-García
A, Figueiredo R, González-Barnadas A, Camps-Font O,
Valmaseda-Castellón E. Accuracy and the role of experience in
dynamic computer guided dental implant surgery: An in-vitro study.
Med Oral Patol Oral Cir Bucal.
2019;24:76-83 |
|
|
|
2.
Chrabieh
E, Hanna C, Mrad S, Rameh S, Bassil J, Zaarour J. Accuracy of
computer-guided implant surgery in partially edentulous patients:
A prospective observational study. Int J Implant Dent.
2024;10:36 |
|
|
|
3.
Chatzopoulos
GS, Wolff LF. Survival rate of implants performed at sites of
previously failed implants and factors associated with failure: A
retrospective investigation. J Dent Sci.
2024;19:1741-1747 |
|
|
|
4.
La
Monaca G, Pranno N, Annibali S, Di Carlo S, Pompa G, Cristalli MP.
Immediate flapless full-arch rehabilitation of edentulous jaws on
4 or 6 implants according to the prosthetic-driven planning and
guided implant surgery: A retrospective study on clinical and
radiographic outcomes up to 10 years of follow-up. Clin Implant
Dent Relat Res.
2022;24:831-844 |
|
|
|
5.
Ali
A, Brintouch I, Romanos G, Delgado-Ruiz R. Cooling efficiency of
sleeveless 3D-printed surgical guides with different cylinder
designs. Medicina (Kaunas).
2024;60:239 |
|
|
|
6.
Kniha
K, Heussen N, Weber E, Möhlhenrich SC, Hölzle F, Modabber A.
temperature threshold values of bone necrosis for
thermo-explantation of dental implants-A systematic review on
preclinical in vivo research. Materials (Basel).
2020;13:3461 |
|
|
|
7.
Waltenberger
L, Wied S, Wolfart S, Tuna T. Effect of different dental implant
drilling template designs on heat generation during osteotomy - an
in vitro study. Clin Oral Implants Res.
2022;33:53-64 |
|
|
|
8.
Krithikadatta
J, Gopikrishna V, Datta M. CRIS guidelines (Checklist for
Reporting In-vitro Studies): A concept note on the need for
standardized guidelines for improving quality and transparency in
reporting in-vitro studies in experimental dental research. J
Conserv Dent.
2014;17:301-304 |
|
|
|
9.
Ashry
A, Elattar MS, Elsamni OA, Soliman IS. Effect of guiding sleeve
design on intraosseous heat generation during implant site
preparation (In vitro study). J Prosthodont.
2022;31:147-154 |
|
|
|
10.
Raj
R, Manju V, Kumar-Gopal V, Eswar M. Analysis of factors
determining thermal changes at osteotomy site in dental implant
placement - An In-vitro study. J Clin Exp Dent.
2021;13:234-239 |
|
|
|
11.
Möhlhenrich
SC, Modabber A, Steiner T, Mitchell DA, Hölzle F. Heat generation
and drill wear during dental implant site preparation: Systematic
review. Br J Oral Maxillofac Surg.
2015;53:679-689 |
|
|
|
12.
Pupulin
F, Oresta G, Sunar T, Parenti P. On the thermal impact during
drilling operations in guided dental surgery: An experimental and
numerical investigation. J Mech Behav Biomed Mater.
2024;150:106327 |
|
|
|
13.
Orgev
A, Gonzaga L, Martin W, Morton D, Lin WS. Addition of an
irrigation channel to a surgical template to facilitate cooling
during implant osteotomy. J Prosthet Dent.
2021;126:164-166 |
|
|
|
14.
Salomó-Coll
O, Auriol-Muerza B, Lozano-Carrascal N, Hernández-Alfaro F, Wang
HL, Gargallo-Albiol J. Influence of bone density, drill diameter,
drilling speed, and irrigation on temperature changes during
implant osteotomies: An in vitro study. Clin Oral Investig.
2021;25:1047-1053 |
|
|
|
15.
Lucchiari
N, Frigo AC, Stellini E, Coppe M, Berengo M, Bacci C. In vitro
assessment with the infrared thermometer of temperature
differences generated during implant site preparation: The
traditional technique versus the single-drill technique. Clin
Implant Dent Relat Res.
2016;18:182-191 |
|
|
|
16.
Gourdache
I, Salomó-Coll O, Hernández-Alfaro F, Gargallo-Albiol J. Dental
implant positioning accuracy using a key or keyless static fully
guided surgical system: A prospective systematic review and
meta-analysis. Int J Prosthodont.
2024;37:199-209 |
|
|
|
17.
Sittikornpaiboon
P, Arunjaroensuk S, Kaboosaya B, Subbalekha K, Mattheos N,
Pimkhaokham A. Comparison of the accuracy of implant placement
using different drilling systems for static computer-assisted
implant surgery: A simulation-based experimental study. Clin
Implant Dent Relat Res.
2021;23:635-643 |
|
|
|
18.
Raabe
C, Schuetz TS, Chappuis V, Yilmaz B, Abou-Ayash S, Couso-Queiruga
E. Accuracy of keyless vs drill-key implant systems for static
computer-assisted implant surgery using two guide-hole designs
compared to freehand implant placement: An in vitro study. Int J
Implant Dent.
2023;9:4 |
|
|
|
19.
Hang
J, Guentsch A. Are sleeves necessary in static computer-assisted
implant surgery? A comparative in vitro analysis. Clin Oral
Implants Res.
2025;36:117-126 |
|
|
|
20.
Gargallo-Albiol
J, Salomó-Coll O, Lozano-Carrascal N, Wang HL, Hernández-Alfaro
F. Intra-osseous heat generation during implant bed preparation
with static navigation: Multi-factor in vitro study. Clin Oral
Implants Res.
2021;32:590-597 |
|
|
|
21.
Gaspar
J, Borrecho G, Oliveira P, Salvado F, Martins J, Santos D.
Osteotomy at low-speed drilling without irrigation versus
high-speed drilling with irrigation: An experimental study. Acta
Med Port.
2013;26:231-236 |
|
|
|
22.
Delgado-Ruiz
RA, Velasco Ortega E, Romanos GE, Gerhke S, Newen I, Calvo-Guirado
JL. Slow drilling speeds for single-drill implant bed preparation.
Experimental in vitro study. Clin Oral Investig.
2018;22:349-359 |
|
|
|