Cekic-Nagas I, Shinya A, Ergun G, Vallittu PK, Lassila LV. Biomechanical behavior of cavity configuration on micropush-out test: A finite-element-study. Med Oral Patol Oral Cir Bucal. 2011 Jan 1;16 (1):e119-23.

doi:10.4317/medoral.16.e119

http://dx.doi.org/doi:10.4317/medoral.16.e119

1. Silva NR, Calamia CS, Harsono M, Carvalho RM, Pegoraro LF, Fernandes CA, et al. Bond angle effects on microtensile bonds: laboratory and FEA comparison. Dent Mater. 2006;22:314-24.
doi:10.1016/j.dental.2005.05.006
PMid:16154631

2. Dejak B, Mlotkowski A. Three-dimensional finite element analysis of strength and adhesion of composite resin versus ceramic inlays in molars. J Prosthet Dent. 2008;99:131-40.
doi:10.1016/S0022-3913(08)60029-3

3. Niu Y, Ma X, Fan M, Zhu S. Effects of layering techniques on the micro-tensile bond strength to dentin in resin composite restorations. Dent Mater. 2009;25:129-34.
doi:10.1016/j.dental.2008.04.017
PMid:18614225

4. Patierno JM, Rueggeberg FA, Anderson RW, Weller RN, Pashley DH. Push-out strength and SEM evaluation of resin composite bonded to internal cervical dentin. Endod Dent Traumatol. 1996;12:227-36.
doi:10.1111/j.1600-9657.1996.tb00520.x

5. Cekic-Nagas I, Ergun G, Nagas E, Tezvergil A, Vallittu PK, Lassila LV. Comparison between regional micropush-out and microtensile bond strength of resin composite to dentin. Acta Odontol Scand. 2008;66:73-81.
doi:10.1080/00016350801958266
PMid:18446547

6. Cekic I, Ergun G, Lassila LV, Vallittu PK. Ceramic-dentin bonding: effect of adhesive systems and light-curing units. J Adhes Dent. 2007;9:17-23.
PMid:17432397

7. Soares CJ, Santana FR, Castro CG, Santos-Filho PC, Soares PV, Qian F, et al. Finite element analysis and bond strength of a glass post to intraradicular dentin: comparison between microtensile and push-out tests. Dent Mater. 2008;24:1405-11.
doi:10.1016/j.dental.2008.03.004
PMid:18420265

8. Goracci C, Tavares AU, Fabianelli A, Monticelli F, Raffaelli O, Cardoso PC, et al. The adhesion between fiber posts and root canal walls: comparison between microtensile and push-out bond strength measurements. Eur J Oral Sci. 2004;112:353-61.
doi:10.1111/j.1600-0722.2004.00146.x
PMid:15279655

9. Betamar N, Cardew G, Van Noort R. Influence of specimen designs on the microtensile bond strength to dentin. J Adhes Dent. 2007;9:159-68.
PMid:17489476

10. Betamar N, Cardew G, Van Noort R. The effect of variations in hourglass specimen design on microtensile bond strength to dentin. J Adhes Dent. 2007;9:427-36.
PMid:18297823

11. Ghassemieh E. Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries. Dent Mater. 2008;24:536-47.
doi:10.1016/j.dental.2007.06.022
PMid:17697706

12. Della Bona A, Van Noort R. Shear vs. tensile bond strength of resin composite bonded to ceramic. J Dent Res. 1995;74:1591-6.
doi:10.1177/00220345950740091401
PMid:7560421

13. Neves Ade A, Coutinho E, Cardoso MV, Jaecques S, Lambrechts P, Sloten JV, et al. Influence of notch geometry and interface on stress concentration and distribution in micro-tensile bond strength specimens. J Dent. 2008;36:808-15.
doi:10.1016/j.jdent.2008.05.018
PMid:18649985

14. Zarone F, Sorrentino R, Apicella D, Valentino B, Ferrari M, Aversa R, et al. Evaluation of the biomechanical behavior of maxillary central incisors restored by means of endocrowns compared to a natural tooth: a 3D static linear finite elements analysis. Dent Mater. 2006;22:1035-44.
doi:10.1016/j.dental.2005.11.034
PMid:16406084

15. Frankenberger R, Strobel WO, Krämer N, Lohbauer U, Winterscheidt J, Winterscheidt B, et al. Evaluation of the fatigue behavior of the resin-dentin bond with the use of different methods. J Biomed Mater Res B Appl Biomater. 2003;67:712-21.
doi:10.1002/jbm.b.10052
PMid:14598398

16. Ferrari M, Sorrentino R, Zarone F, Apicella D, Aversa R, Apicella A. Non-linear viscoelastic finite element analysis of the effect of the length of glass fiber posts on the biomechanical behaviour of directly restored incisors and surrounding alveolar bone. Dent Mater J. 2008;27:485-98.
doi:10.4012/dmj.27.485
PMid:18833761

17. Mannocci F, Machmouridou E, Watson TF, Sauro S, Sherriff M, Pilecki P, et al. Microtensile bond strength of resin-post interfaces created with interpenetrating polymer network posts or cross-linked posts. Med Oral Patol Oral Cir Bucal. 2008;13:E745-52.

18. Helvatjoglu-Antoniades M, Papadogiannis Y, Lakes RS, Dionysopoulos P, Papadogiannis D. Dynamic and static elastic moduli of packable and flowable composite resins and their development after initial photo curing. Dent Mater. 2006;22:450-9.
doi:10.1016/j.dental.2005.04.038
PMid:16099030

19. De Durâo Mauricio PJ, González-López S, Aguilar-Mendoza JA, Félix S, González-Rodríguez MP. Comparison of regional bond strength in root thirds among fiber-reinforced posts luted with different cements. J Biomed Mater Res B Appl Biomater. 2007;83:364-72.
doi:10.1002/jbm.b.30805
PMid:17385219

20. Wakefield CW, Draughn RA, Sneed WD, Davis TN. Shear bond strengths of six bonding systems using the pushout method of in vitro testing. Oper Dent. 1998;23:69-76.
PMid:9573791